Loaders bars cnc Iemca Boss 542

IEMCA BOSS 542 CNC

Condition: ready for operation (used), bar length: 4,400 mm, overall weight: 900 kg, Bar diameter Ø 5-45 mm Magazine capacity 280 Min. bar changeover time 27 sec. Feed rate 150 mm/sec., adjustable Return speed 950 mm/sec. Fgjdpow Rfkbsfx Akvjf Supply voltage 230/400 Volt Installed power 3 KW Compressed air 6 bar Weight 900 kg

Condition: new, Ostas 3-Roll Round Bending Machine SMR-S 2070 x 190 Technical Specifications: Special equipment included in the price: Motorized adjustment of the lower rolls Hardened rolls Motorized adjustment of the rear rolls Digital display Sheet metal width 2070 mm Sheet metal thickness 7.0 mm max. Sheet metal thickness for initial bending 6.0 mm Fedpfog Nz T Iox Akvjgf Roll length 2070 mm Smallest diameter 285 mm Roll diameter 190 mm Weight 3480 kg Dimensions L-W-H 3750 x 920 x 1260 mm Motor 4 kW Equipment: Top and bottom rolls electrically driven Top roll can be swung out Conical bending device Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable, CE marking

Condition: ready for operation (used), functionality: fully functional, bar length: 3,200 mm, bar diameter (max.): 43 mm, overall weight: 900 kg, Bar diameter Ø 5-45 mm Magazine capacity 280 Min. bar changeover time 27 sec. Fsdpow Rcfvjfx Akvogf Feed rate 150 mm/sec., adjustable Return speed 950 mm/sec. Supply voltage 230/400 Volt Installed power 3 KW Compressed air 6 bar Weight 900 kg

Condition: good (used), Year of construction: 2005, operating hours: 32,870 h, functionality: fully functional, machine/vehicle number: 6030578, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, We offer for sale Traub TNL26K automatic cnc lathe. Machine is connected to power and can be inpected every time by prior appointment. Year of built: 2005 Spindle passage 32mm Main spindle: 6.7/10.7kW; 8000rpm Counter spindle: 6.7/10.7kW; 8000rpm Upper turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Fgodjvldx Ajpfx Akvjf Connected load: 24kW Barfeeder: FMB Turbo 5-42/4200mm Swarf conweyor: Knoll 240 S1/100 Coolant Kompaktbandfilter: Resy Machine is sold with a lot of toolholders not driven and driven - list on attached photo.

Condition: good (used), Parts shown by hand not come. Technical details shown on picture. Fodswb Eptjpfx Akvsgf Tools in wooden box will come with machine.

Condition: good (used), Bar feeder LNS Fedpfxsr Iygie Akvegf

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 560 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 570 mm, workpiece weight (max.): 300 kg, number of slots in tool magazine: 40, total height: 2,391 mm, total length: 3,110 mm, total width: 2,960 mm, overall weight: 7,800 kg, table length: 475 mm, table width: 712 mm, controller model: FANUC, coolant supply: 20 bar, spindle motor power: 18 W, rapid traverse Z-axis: 36 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, spindle nose: ISO 40, spindle speed (max.): 12,000 rpm, spindle speed (min.): 60 rpm, table load: 300 kg, tool diameter: 125 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​vertical machining center "DOOSAN model VC430" with CNC Fanuc 0i-MD Fjdpfxowdgk Rj Akvsgf

Condition: used, Year of construction: 1988, Technical details: pressure: 10 t workpiece diameter - max.: 40 mm threading length: 70-80 mm workpiece diameter min/max: 3 / 40 mm revolution per minute: 47-94 U/min feed speed: 0,5 - 6 mm/s work stroke: max. 7 mm total power requirement: 4,68 kW Weight approx.: 1,4 t dimensions of machine: 1,4 x 1,4 x 1,7 B T H m dimensions of hydaulic: 0,8 x 1,2 m Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40mm min. thread diameter 3mm up to 3.5 mm pitch max. pitch 1.75mm roller width min. 80 mm max. 120mm shaft speed 47-94 roller shaft diameter 40 various rollers as accessories Fsdpfx Akew D Aq Tsvegf *

Condition: good (used), Year of construction: 2006, operating hours: 40,000 h, functionality: fully functional, machine/vehicle number: M086, spindle speed (max.): 1,500 rpm, spindle speed (min.): 15 rpm, spindle motor power: 22,000 W, Vertical turret lathe with CNC Control: FANUC Series 18i-TB Number of turrets: 1 Number of tools stations: 12 Chip conveyor: 3508734 Fodpfx Akstmq Ukjvegf Boring bar holder: dia. 50 mm The machine is still under power.

Condition: good (used), Rolling pressure 220 kN Ø Pieces 3mm min; 70mm max Pitch 6mm max Grooving pitch 2.25mm max Roller width 160mm max Ø Roller 133mm min; 170mm max Roller shaft speed 24 30 38 45 62 72 90 114 rpm Ø Roller carrier shaft 54mm standard; 69.85 special Fgsdpfx Akevyyyxjvof Distance between shafts 135mm min; 230mm max Working stroke 15min max Feed rate 0.5mm/s to 6mm/s Laminating time 0.1s to 100s Pause time 0.1s to 100s Main motor 5.5 Kw Electrical power consumption 8.6 Kw Tank capacity 130 L Weight approx 2100 Kg