Vertical machining center

hyundai F500 plus

Condition: new, Year of construction: 2019, functionality: fully functional, Stock machine, new Control: Fanuc 0i-M with Manual Guide Hyundai Wia Fanuc Series Main drive: 18.5/11 kW - 117.7 Nm Spindle speed range: 12,000 rpm Number of axes: 3 Travel distances X-axis: 1,060 mm Y-axis: 510 mm Z-axis: 635 mm Rapid traverse: X/Y 36 m/min, Z 30 m/min Table: 1200x500 mm Table load capacity: 800 kg Tool stations: 30 Tool holder: BBT40 Coolant through spindle: 20 bar Hinged belt chip conveyor / left side Further details can be found in the attached brochure. Machine is available immediately. Ledpfx Ahoyf Nkzjvsri We would be happy to arrange an inspection appointment in Idstein.

Condition: used, Year of construction: 2014, Technical details: grinding diameter max.: 3-220 mm regulating wheel width: 500 mm max. width of grinding wheel: 500 mm weight of the machine ca.: 16 t. Lodpfx Ajt Uw Avjhvori dimensions of the machine ca.: 12 x 10 x 8 m. grinding wheel diam. min/max.: 420-610 grinding wheel diameter - width-internal grin: 304,8 x 500 mm Regulatin wheel diameter min/max.: 300-350 mm The machine is currently designed for plunge grinding JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls. *

Condition: used, Year of construction: 1996, center height in crank: 1,100 mm, workpiece weight (max.): 80,000 kg, grinding length: 14,000 mm, grinding wheel diameter: 915 mm, grinding diameter: 2,000 mm, quill stroke: 200 mm, quill diameter: 260 mm, workpiece weight between centers: 80,000,000 g, workpiece diameter between centers: 2,000 mm, workpiece length between centers: 14,000 mm, power: 35 kW (47.59 HP), High capacity cylinder grinder with hydrostatic guides POMINI mod. HD 402/425 - year 1996 - maximum diameter 2000mm - working length 14000mm - tip capacity 80000 kg. Possibility of complete retrofit of the machine's electrical unit, manageable updates or modifications for application change. Lredpfx Ajtxlyxohvoi Grinder disconnected and ready for collection.

Condition: excellent (used), Year of construction: 2022, operating hours: 6,600 h, functionality: fully functional, machine/vehicle number: ML0118-000493, turning diameter over cross slide: 670 mm, turning length: 1,285 mm, turning diameter: 420 mm, spindle speed (max.): 2,800 rpm, travel distance X-axis: 293 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 30,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,315 mm, total length: 4,530 mm, total width: 2,249 mm, quill travel distance: 100 mm, quill diameter: 100 mm, quill stroke: 1,350 mm, swing diameter over cross slide: 670 mm, turning diameter over bed slide: 720 mm, workpiece weight (max.): 1,000 kg, torque: 1,240 Nm, overall weight: 8,000 kg, bar passage: 102 mm, spindle nose: A2-11, Equipment: documentation/manual, rotational speed infinitely variable, CNC turning machine with driven tools and Y-axis, programmable tailstock (servo-driven), driven tool turret with BMT 65P interface, programmable steady rest holder with steady rest SLUB 3.1, automatic tool measurement arm, coolant gun, SMW power chuck 325 mm and SMW power chuck 400 mm, chip conveyor, Liqui band filter system, various tool holders including driven holders, filter for coolant extraction, programming system for external computer. Ledpfx Ajydcd Sohvjri

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 389 mm, turning length: 485 mm, turning diameter: 678 mm, spindle bore: 86 mm, spindle speed (max.): 3,500 rpm, feed length X-axis: 236 mm, feed length Z-axis: 495 mm, chuck outer diameter: 254 mm, controller model: Mori Seiki MSG-501, Twin Spindle Lathe with Mori Seiki MSG-501 Control, Live Tooling. 12 Station ATC, 3 Jaw Chuck 250mm, CHip Conveyor, Lsdpfx Aeyguzzehveri 170mm 3 Jaw Chuck

Condition: ready for operation (used), Year of construction: 1989, This MORI SEIKI SL 25 was manufactured in 1989. It is a horizontal turning machine equipped with a three-jaw chuck, dead-collet head, chip conveyor, and tailstock. Clamping wedges for tools are also included. Consider the opportunity to buy this MORI SEIKI SL 25 horizontal turning machine. Contact us for more information. • Tailstock Additional equipment • Three-jaw chuck and dead-collet head 185e • Chip conveyor • Clamping wedges for tools Ljdpfxsx D R Rrs Ahvori

Condition: used, Year of construction: 2022, INDEX - C200 - 2022 - less used condition as shown on photos Lrjdpfjyl Nnasx Ahvoi - under power, can be tested

Condition: good (used), Year of construction: 2000, turning length: 300 mm, turning diameter over cross slide: 520 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 219 mm, travel distance Z-axis: 310 mm, Mori Seiki SL-150 SMC Twin Spindle CNC Turning Center (2000) Machine Type: CNC Turning Center Year of Manufacture: 2000 Serial Number: 1352 Control System: Mori Seiki SMC-501 Twin Spindle (Main & Sub Spindle) Live Tooling Turret C-Axis: 0.001° indexing Maximum Turning Diameter: approx. 320 mm Maximum Turning Length: approx. 300 mm Swing Over Bed: approx. 520 mm X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 310 mm Main Spindle Maximum Speed: 5,000 rpm Chuck: 6.5" 3-Jaw Power Chuck Sub Spindle Maximum Speed: 5,000 rpm Chuck: 5.5" 3-Jaw Power Chuck Live Tooling Live Tool Speed: 3,000 rpm Tool Turret: 12-Station Live Turret Standard Equipment Tool Presetter Ledpfex Hp Hgsx Ahvsri Chip Conveyor Coolant System Machine Data Machine Weight: approx. 5,000 kg Machine Dimensions (L × W × H): approx. 2,800 × 1,700 × 1,800 mm

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Lrjdpfxsfg Rlce Ahvji Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 65 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, Doosan LYNX 2100LYA – CNC Turning Center – 2020– Excellent Condition, Ready to Work! We offer for sale the Doosan LYNX 2100LYA CNC turning center, a high-performance machine for precise machining of rotational parts such as shafts, cones, spheres, and internal/external threads. The machine is in excellent technical condition, available immediately and ready for inspection. Key Features: High precision and reliability for both series and single-part production Large turret with 24 tools (including driven tools) Control system: Siemens Sinumerik 828D Powerful spindle and driven tools for high productivity Spindle bore 61 mm allows machining of various workpieces Technical Data: Max. turning length: 510 mm Max. turning diameter: 300 mm Clearance over bed: 600 mm Clearance over carriage: 400 mm Spindle bore: 61 mm Max. bar diameter: 51 mm Max. spindle speed: 6000 rpm Lodpfx Ahsyftfiovori Number of turret tools: 24 (driven tools included) Control system: SIEMENS Sinmerik 828D Year of manufacture: 2020 Dimensions (L x W x H): 2805 x 1582 x 1693 mm Weight: 3500 kg The machine is ready for immediate operation, connected to power, and available for inspection.