Machining center

Hurco VMX 50

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: WINMAX, total height: 3,240 mm, table load: 2,000 kg, overall weight: 7,950 kg, spindle speed (max.): 12,000 rpm, tool weight: 7,000 g, number of axes: 3, This 3-axis Hurco VMX50i was manufactured in 2021. It features a robust SK40 spindle, capable of reaching speeds up to 12,000 rpm, and a large table surface of 1500 x 660 mm supporting up to 2000 kg. With X/Y/Z travels of 1270/660/610 mm and rapid traverse rates of 32/32/24 m/min, it's ideal for dynamic machining tasks. Includes a 30/40 position automatic tool changer. Contact us for more information about this machine. • Spindle face to table: 101–711 mm • Table working surface (W x D): 1500 x 660 mm • Table T-slots (DIN 650): 6 x 18 x 100 • Automatic tool changer (ATC) positions: 30/40 • Machine status: Powered and in operation • Total machine hours: 6700 Additional equipment • Chip conveyor • Mist collector • External emulsion tank with filtration for internal tool cooling • Including workpiece and tool probes • Programming extensions dwg-dxf Dimensions Machine Depth 5059 mm Gbsdpjx D E Acefx An Rsl

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Gbjdpfjrpn Dvjx An Rjl Technical details shown on picture.

Condition: used, Year of construction: 2021, x-travel 1270 mm y-travel 660 mm z-travel 610 mm Gbsdpfsy Nfabsx An Rjl weight of the machine ca. 8680 kg

Condition: good (used), Year of construction: 2003, x-Weg 1270 mm y-Weg 660 mm z-Weg 610 mm Steuerung Ultimax 4 Tischbelastung 1300 kg Drehzahl 10.000 U/min Werkzeugwechseleinrichtung 24-fach Werkzeugaufnahme SK 40 Antrieb 15 kW Tischgröße 1500x660 mm Gesamtleistungsbedarf kW Maschinengewicht ca. 9 t Gjdpfsiv R Hlox An Rjbl Raumbedarf ca. 4,8x4,5x2,95 m

Condition: good (used), Year of construction: 2019, Industrial robot Gbjdpfx Aen Utbgjn Rsl Manufacturer: Kuka Model: KR60 HA Year of manufacture: 2018/2019 Low operating hours Reach: 2033 mm Weight: 665 kg Payload: 60 kg Kuka control unit KRC4 Weight: 150 kg Software V8.3.40 Kuka touch panel Kuka connecting cables 11526ä

Condition: not inspected (used), Year of construction: 2003, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 640 mm, Ultimax control Gjdpfx Anjxu Ikqo Rsbl BT 40 spindle, new in 2020 speed 10,000 rpm travels 1270X660X640 mm 24-tool changer chip conveyor

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: H-5070, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 660 mm, feed length Z-axis: 610 mm, controller manufacturer: Hurco, controller model: Ultimax, workpiece length (max.): 1,500 mm, workpiece width (max.): 660 mm, workpiece weight (max.): 1,300 kg, table width: 660 mm, table length: 1,500 mm, table load: 1,300 kg, spindle speed (max.): 10,000 rpm, spindle mount: MK 4, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, We are offering this ready-to-use Hurco VMX50 vertical machining center, year of manufacture 2006. Manufacturer: Hurco Model: VMX50 Year: 2006 CNC milling machine Hurco VMX 50 | YOM 2006 | SK40 | Chip conveyor | Spare parts For sale is a CNC machining center Hurco VMX 50 (year of manufacture 2006). The machine is well-maintained, in good condition, and immediately available—ideal for workshops, subcontractors, or training facilities. Technical Data Manufacturer: Hurco Model: VMX 50 Year: 2006 Control: Hurco Ultimax Travel (X/Y/Z): 1,270 / 660 / 610 mm Gbedpfx Aney Exu Rj Rjl Table size: 1,500 × 660 mm Table load: approx. 1,300 kg Spindle: SK40, up to 10,000 rpm (depending on version) Rapid traverse (X/Y/Z): 30 / 30 / 20 m/min Tool changer: 20 stations Coolant through spindle (IKZ) available Coolant system: yes Chip conveyor: yes Scope of delivery / Special features Including various spare parts LAN-enabled due to WR Box Chip conveyor included with the machine Inspection under power possible Collection only – loading can be arranged Price net plus VAT Location: 93073 Neutraubling Mobile: +49 160 97215567 If you have any questions or need more information, please feel free to send us a message or give us a call.

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: New (delivery time 6-8 weeks) Control: DT 15 bending length: 3050 mm distance between the columns: 2600 mm Y Fast speed: 160 mm / s Y Working speed: 10 mm / s Y Retraction speed: 140 mm / s Motorized crowning table length: 630 mm table width: 154 mm table height: 900 mm stroke: 365 mm Projection: 410 mm 2 support arms 2 Backgauge fingers Godpfxofifg Hj An Robl Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Option: CE standard with manual fussler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4 axes) CNC motorized crowning Engine power 37 kW Oil tank capacity 250 lt length 4300 mm Width 1820 mm Height 3230 mm Weight approx. 17250 kg

Condition: used, Year of construction: 2001, HURCO VMX 50 MACHINING CENTER MACHINE IS STILL UNDER POWER YEAR OF MANUFACTURE : 2001 ONLY 6.000 HOURS (approx. ) MEASURING PROBE FOR WORKPIECE POSITION DETECTION FROM TOOLMAKING: PROCEDURES : X : 1270 mm Y : 600 mm Z : 610 mm Size of the table: 1500 mm x 660 mm MAX. LOAD ON THE TABLE : 1300 KG. POWER : 15 KW SPINDLE SPEED : 10.000 RPM Gedpey A Iqpsfx An Rebl TOOL MAGAZINE : 24 STATIONS SPINDLE TAPER : SK40 WEIGHT : KG. 9.000Kg Only the machine no accessories

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, table load: 1,350 kg, spindle speed (max.): 12,000 rpm, Tool changer: 24 positions IKZ (internal coolant supply): 40 bar Probe: Renishaw Tool measurement: Renishaw Footprint (W x D x H) (Doors closed / without control / chip conveyor): 3250 x 2220 x 2950 mm Transport weight: 8,900 kg Gbsdeyx E Nnspfx An Rel

Condition: used, Year of construction: 2008, x-travel 2000 mm y-travel 620 mm Gjdpfx Anoulnbko Rsbl z-travel 520 mm tool taper 2500 x 600 mm control 2000 kg tool magazin: SK40 rapid traverse HEIDENHAIN table-size 30 - 8000 U/min feed 45 m/min total power requirement 45 m/min workpiece weight max. 20 kW diameter of tools max. 10500 kg tool length - max. 5400 x 3300 x 3000 mm Equipment: - Heidenhain iTNC 530 control system - Tool magazine with 30 spaces - Chip conveyor - Screen filter system with IKZ - Operating instructions Optional (on request): - Radio probe (Heidenhain) - Tool measurement system (Heidenhain TT 160)

Condition: excellent (used), Hurco VMX50i (2014) 3-Axis Vertical Machining Centre Gsdeyx H Rtepfx An Robl Control: Hurco WinMax Travels & Capacity X Axis Travel: 1270 mm Y Axis Travel: 660 mm Z Axis Travel: 610 mm Table Size: 1500 x 660 mm Max Table Load: 2000 kg

Condition: used, Year of construction: 2002, functionality: fully functional, The machining center has been inspected by a Hurco technician and found to be fully operational without any faults. Technical Data - Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40 Type B - Feed rate: up to 23 m/min Work Table: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Gsdpox Iikbsfx An Rsbl Control: - Hurco Ultimax 4, incl. software for milling simulation - electronic hand control unit - Interfaces: RS 232C / V24 - 2 monitors for text and graphics processing - 2 software units for plain text and ISO programming Machine Construction: - High rigidity, suitable for roughing operations Tool Changer: - Double-arm changer with 24 stations Equipment: - Cooling unit for milling spindle - Rinsing system for chip removal - Splash guard cabin - Coolant system with filtration - Internal coolant supply ICS 20 bar - Chip conveyor Machine Data: - Required space (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400V, 50/60 Hz An inspection of the machine is possible by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Year of construction: 2001, condition: ready for operation (used), Max. pressing force: 1000kN, max. working length: 3100mm, throat depth: 250mm, connected load: 18kW, weight: 9.5t, operational hours counter: 76,566h, with accessories and documentation, was maintained regularly. Gbedpfolzizmox An Rsl

Condition: ready for operation (used), Year of construction: 2014, total height: 3,240 mm, overall weight: 8,880 kg, This 3-axis Hurco VMX 50i was manufactured in 2014, featuring a robust table size of 59 x 26 inches and a maximum spindle speed of 12,000 rpm. It supports a tool capacity of 40 with a rapid tool-to-tool ATC time of 2 seconds. Ideal for precise, heavy-duty machining with a maximum table load of 4,410 lb. If you are looking to get high-quality milling capabilities consider the Hurco VMX 50i machine we have for sale. Contact us for more information. • Table Size: 1500 x 660 mm • T-Slots: 6 x 18 mm • Maximum Weight on Table: 2000 kg • Spindle Nose to Table: 101 mm • Maximum Spindle Speed: 12000 rpm • Spindle Power (15 min/Continuous): 15 kW / 11 kW @ 720 rpm • Spindle Torque (15 min/Continuous): 198.9 Nm / 116.7 Nm @ 720 rpm • Tool Type: CAT 40 / Big Plus® • Tool Capacity: 40 • Maximum Tool Diameter: 76 mm • Maximum Tool Length: 300 mm Gbedpfxjx D E Eqe An Rjl • Maximum Tool Weight: 7 kg • Tool-to-Tool ATC Time: 2 sec Dimensions Machine Depth 5055 mm