Vertical machining center

Hurco VM 1

Condition: good (used), Year of construction: 2004, operating hours: 21,000 h, Hurco 3 axis vertical machining center in good condition with ca 21000 operating hours. Ready for immediate delivery (dismantled and transport ready). Cnc control Hurco Ultimax X-axis 600 mm Y-axis 355 mm Z-axis 455mm Motor 7.4 KVA Hnedpfsx Uqm Dox Ah Nog Frequency 50 Hz Full load 13 KVA AC volts 3 phase 400 Capacity Tool Magazine 16 positions Type of tool holder SK40 Max spindle speed: 8000 rpm Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Milling Machining Center - Vertical / Brand: DECKEL MAHO / Type: DMC 63V / Year of construction: 1999 The machine can be inspected by appointment under power. Well-maintained and very good functional condition. Spindle replacement: 18.03.2022 Hnedev Nxbyepfx Ah Njg Spindle hours (03/13/2025): 51.206 h The machine has a Lehmann A-axis and counter bearing (as new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed/axis drives: - Advancing force X, Y, Z (100 % ED): 6.000 N - Feed rate: 0 - 30.000 mm/min - Rapid feed X, Y, Z: 30 m/min - Diameter ball screw/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z-axis to VDI/DGQ 3441: 0,015/0,010 mm (indirect/direct measuring system) Distance measuring system: - Input unit: 0,001 mm Working spindle: - Drive power (40/100 % ED): 13/9 kW - Torque (40/100 % ED): 83/57 Nm - Speed range: 1 - 10.000 rpm - Tool holder DIN 69 871-A: SK40 - Tool clamping force: 12.000 N Tool magazine: - Tool changing system: Pick-up - Number of magazine positions: 24 - max. Tool-Ø with vacant neighboring spaces: 80/140 mm - max. Tool length: 300 mm - max. Tool weight: 7 kg - Chip-to-chip time: 6,5 sec - Rotational speed/tool magazine: 47 rpm - max. Maximum loading weight of the tool magazine (24 x 3 kg): 72 kg Machine/Working table: - Clamping surface with T-slots DIN 650-14: 800 x 500 mm - Table load (set-up weight): 500 kg - Loading height: 850 mm - max. Workpiece height (at max. tool length): 240 mm EQUIPMENT: - CNC-Control: Siemens 810D powerline - Lehmann A-axis and counter bearing (as new) - Direct measuring system - Internal cooling through the spindle, 15 bar - Coolant system (emulsion) - Electronic hand wheel - Chip conveyor - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Hurco machining center VM 1 very good condition x-way: 660 mm y-travel: 355 mm z-travel: 455 mm Hjdorxfxhspfx Ah Neng Control system: Ultimax Table clamping surface: 760x355 mm Table load: max. 340 kg Tool magazine with: 16 places Tool holder: SK - A40 Spindle speeds: 10-10000 rpm Spindle hours Total power requirement: 7.8 kW Machine weight approx.: 3.8 t

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: VMX106205017CHB, travel distance X-axis: 660 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 457 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Control: Ultimax 4 system version 2.37.01e (Patch F) / 2.6.04i Table dimensions: 760 mm x 355 mm Travel X: 660 mm Travel Y: 355 mm Travel Z: 457 mm Spindle Spindle speed: 10 - 10,000 rpm Clamping device holder: SK40 Feed rates Rapid traverse X/Y: 22,500 mm/min Rapid traverse Z: 3,810 mm/min Hjdjxy Nq Ajpfx Ah Njng Tool changer Tool changer: 20-way MACHINE DETAILS Floor area (L x W x H): 2,600 mm x 1,600 mm x 2,500 mm Weight: approx. 3 t

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 400 mm Hjdpjv Az Ucsfx Ah Neng z-travel 400 mm control MSX 501 Mori Seiki table surface area 700 x 450 mm max. table load 350 kg number of T-slots 4 T-slot - width 18 mm T-slot - distance 100 mm Number of revolutions 12.000 U/min power capacity - main spindel 18,5 / 15 / 11 kW tool taper BT 40 max. Torque 110,5 Nm diameter of forward milling spindle bearing 70 rapid travel x/y/z 20.000 mm/min feed speeds 1 - 20.000 mm/min Tipp feed 15 Steps / 0 - 1.260 mm/min Number of Toolpositions in magazine 40 Pos. Max. mould width 80 mm max. tool-dia with free toolbox 125 mm max. tool length 250 mm max. tool weight 8 kg change-time chip to chip 2,8 sec change-time tool to tool 1,0 sec total power requirement 34 kVA weight of the machine ca. 7,2 t dimensions of the machine ca. 2,8 x 3,0 x 2,9 m Machining Center Vertical MORI SEIKI - NV 4000 DCG - ca. 14.000 Operating-Hours

Condition: excellent (used), Year of construction: 2007, Vice NOT included Comes with a small selection of tooling. Hnedpfx Ahexwlx Ds Nog X Axis Travel - 660mm, Y Axis Travel - 356mm, Z Axis Travel - 457mm, Max Table Load - 340kg, Spindle Motor - 10HP, Spindle Speed - 8000RPM, Spindle Taper - 40CT, Tool Changer - 20ATC

Condition: ready for operation (used), Year of construction: 2006, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: VMX1-06229016BHB, travel distance X-axis: 660 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 450 mm, table width: 762 mm, table length: 356 mm, TECHNICAL DETAILS Travel Paths Travel X-axis: 660 mm Travel Y-axis: 350 mm Travel Z-axis: 450 mm Table and Mounting Table clamping surface: 762 x 356 mm Mounting: SK 40 DIN 69871 Spindle and Tools Speed: 10 - 10,000 rpm Tool station capacity: 20 stations Control: ULTIMAX 4 MACHINE DETAILS Electrical Data Hodpfx Asw Eiaqeh Njng Voltage: 400 V Number of phases: 3 Frequency: 50 Hz Operating hours: 25,000 hours Dimensions & Weight Dimensions: 2,000 x 1,800 x 2,660 mm Weight: 2,900 kg

Condition: as good as new (ex-display), Year of construction: 2017, operating hours: 132 h, functionality: fully functional, machine/vehicle number: 20731, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, nominal power (apparent): 35 kVA, controller manufacturer: Fanuc 31I, spindle speed (max.): 42,000 rpm, operating hours of spindle: 132 h, coolant supply: 20 bar, spindle motor power: 15 W, spindle nose: HSK E40, input voltage: 415 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, The Machine is in perfect condition. Machining accuracy is +/-0.0015mm. (measured with zeiss micura) The machine is equipped with Renishaw OMP400 and BLUM Pico for workpiece and tool measuring. Repeating accuracy is +/-0.001 High speed and high accuracy option on Fanuc. Hjdevcfi Djpfx Ah Njng The Machine can be inspected under power.

Condition: good (used), Year of construction: 2007, No longer required in production. Parts are no longer required. Hsdpfx Aeumt D Hoh Njng

Year of construction: 2002, condition: ready for operation (used), Machining center Hurco VM 1 spindle speed max. 8000 rpm traverse path: X: 660mm Y: 406mm Z: 508mm Hnjdsi E Iacjpfx Ah Neg spindle 2000 hours complete software options DXF tapping without chuck all tools are included , Hilma Schraustock drawer shcrank with tools

Condition: used, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, Milling machine, second-hand Make: Fadal Hsdjtud Utjpfx Ah Nsng Model: 904-1 VMC 3016 Year of manufacture: Serial No. 9401487 Technical data: X-travel 762 mm Y-travel 406 mm Z-travel 508 mm Spindle holder: SK 40 Spindle speed 8000 rpm Machine weight: 3800 kg