Baler

HSM V-Press 860 plus

Condition: good (used), Year of construction: 2011, functionality: fully functional, Compressive force 548 kN The size of the loading opening is 1,195 x 650 mm Ndodpfjttaytjx Aaaod Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm Bodhzadl7zw The weight of the equipment is 2,030 kg

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Ndodpfx Aeu Thhrsaajd Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: HSM-300034869, pressing force: 55 t, filling opening width: 650 mm, filling opening length: 1,195 mm, bale length: 1,200 mm, bale width: 780 mm, bale height: 1,200 mm, bale weight: 480 kg, total width: 1,247 mm, total height: 2,985 mm, total length: 1,797 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,010 kg, transport height: 2,168 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, Brand: HSM The stated price is exclusive of VAT, ex works, and excluding packaging. The press has been cleaned and tested for functionality. Technical Details: Manufacturer: HSM Type: V-Press 860 plus Bale size (LxWxH): 1200 x 780 x 1200 mm Bale weight: 480 kg External dimensions (LxWxH): 1797 x 1247 x 2985 mm Transport height: 2140 mm Ndodpfx Ajvpfw Ueaasd Feed opening: 1195 x 650 mm Pressing pressure: 548 kN Throughput: 1 - 2 bales / hour Number of wire channels: 4 Press weight: 2,010 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: Indoors / outdoors, covered Serial number: 300034869 Year of manufacture: 2009 Please refer to the original documentation, which can be obtained directly from the manufacturer.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Compressive force 548 kN The size of the loading opening is 1,195 x 650 mm Ndedpfxsttal Ae Aaajd Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm The weight of the equipment is 2,030 kg

Condition: used, Year of construction: 2009, System: Decanter Type: ALDEC G2-80 Year of construction: 2009 Machine No.: 5024392-2009 Speed: 3650 rpm Ndodpfxswqc Sdo Aaaod Drum diameter: 80/263 mm Control cabinet: Rittal 400V-50Hz Other: incl. frequency converter and complete documentation Separation technology: Sludge dewatering by means of decanter centrifuges (solid bowl scroll centrifuges, decanters). The high centrifugal forces, due to different densities, separate the fine solids from the suspension.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: HSM-300040368, pressing force: 55 t, filling opening width: 650 mm, filling opening length: 1,195 mm, bale length: 1,200 mm, bale width: 780 mm, bale height: 1,200 mm, bale weight: 480 kg, total width: 1,247 mm, total height: 2,985 mm, total length: 1,797 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,010 kg, transport height: 2,168 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, Brand: HSM The stated price is exclusive of statutory VAT, ex works and without packaging. The press is cleaned and function-tested. Technical details: Manufacturer: HSM Model: V-Press 860 plus Bale size (LxWxH): 1200 x 780 x 1200 mm Bale weight: 480 kg External dimensions (LxWxH): 1797 x 1247 x 2985 mm Transport height: 2140 mm Feed opening: 1195 x 650 mm Pressing force: 548 kN Nodpfxjwnpz Hj Aaajdd Throughput: 1 - 2 bales / hr Number of wire channels: 4 Weight of press: 2,010 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: inside / outside covered Serial number: 300040368 Year of manufacture: 2009 We refer to the respective original documentation, which can be obtained directly from the manufacturer.

Condition: good (used), Year of construction: 2013, Compressive force 548 kN The size of the loading opening is 1,195 x 650 mm Ndodsttav Nepfx Aaajd Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm Bodhzadl7zw The weight of the equipment is 2,030 kg

Condition: as good as new (ex-display), Year of construction: 2025, The BTS-MF200MK is the ideal multi chamber waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 200 kg. Various materials can be collected into two or more chambers installed next to each other and once a chamber is filled the rollable compaction head will be moved Njdpfovugz Eex Aaasdd over and the material can be baled. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 16 Ton Bale weight: up to 200 kg (material depending) Bale size: 1000 H (var.) x 1100 W x 800 D mm Machine size: 2506 H x 3260 W x 1269 D mm Machine weight: 1400 kg Transport height: 2506 mm Loading aperture: 1100 W x 800 H mm Cycle times: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Short processing time because there is always a chamber available for loading Retainer for reducing the material spring back Reel holder for 8 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Big Bags Clothes Light valuable materials Optional extras Machine colour RAL PLC auto compaction cycles with bale full light and E-stop with locking key Extra chamber (up to 6 chambers in total) Strapping rolls Twin Chamber Waste Baler, Multi Chamber Waste Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: HSM-390000438, pressing force: 55 t, filling opening width: 650 mm, filling opening length: 1,195 mm, bale length: 1,200 mm, bale width: 780 mm, bale height: 1,200 mm, bale weight: 480 kg, total width: 1,247 mm, total height: 2,985 mm, total length: 1,797 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,010 kg, transport height: 2,168 mm, power: 4 kW (5.44 HP), year of last overhaul: 2025, Brand: HSM The stated price is exclusive of statutory VAT, ex works and without packaging. Njdewnpxlopfx Aaasdd The press is cleaned and functionally tested. Technical details: Manufacturer: HSM Type: V-Press 860 plus Bale format (LxWxH): 1200 x 780 x 1200 mm Bale weight: 480 kg External dimensions (LxWxH): 1797 x 1247 x 2985 mm Transport height: 2140 mm Feed opening: 1195 x 650 mm Pressing force: 548 kN Throughput: 1 - 2 bales / hour Number of wire channels: 4 Weight of press: 2,010 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation site: indoor / covered outdoor Serial number: 390000438 Year of construction: 2013 We refer to the respective original documentation, which can be obtained directly from the manufacturer.

Condition: excellent (used), functionality: fully functional, Technical data for the document shredding system: Manufacturer HSM GmbH + Co KG General data for the two-stage shredder system: Type Duo Shredder 5750 Year of manufacture 2015 Operating hours 3,093 hours Ndsdpfx Ajwrybreaasd Throughput capacity up to 800 kg/hour, depending on material Rated power 30 kW Rated current 62 A Particle cutting size 6 x 40 - 53 mm Fuse protection 63 A gG/gL/C/K Weight of shredder approx. 2500 kg Data on the pre-shredder: Shredder type V 570 Working width of the cutting unit 500 mm Particle size 20 x 155 mm (w x l) Nominal power of pre-shredder 2 x 5.5 kW Nominal current of pre-shredder 2 x 11.5 A Data on the secondary shredder: Shredder type P 500.2 Working width of the cutting unit 500 mm Particle size 6 x 40 – 53 mm (w x l) Nominal power of secondary shredder 9.2 kW Nominal current of secondary shredder 18 A Security level according to DIN 66399 P-3, O-2, T-3, E-2 Baling press data: Type KP 100.1 Year of manufacture 2015 Operating hours 2,377 hours Pressing force 9 - 12 t Bale weight 40 – 150 kg/bale, depending on material Cycle time 7–16 seconds Feed chute dimensions 450 x 580 mm Bale size 630 x 500 x 400-1000 mm (w x h x l) Triple horizontal binding Press dimensions 3990 x 2225 x 1735 mm (l x w x h) Weight of press approx. 1000 kg Dimensions of entire system, conveyor belt, shredder and press: 9560 x 2071 x 3550 mm (l x w x h) Function description: This is a complete system consisting of a feed conveyor belt, a two-stage shredder and a horizontal baling pres. The material is fed onto the conveyor belt, shredded in two stages and then pressed into stackable bales. A second cutting unit and various motors are available as spare parts for the system. Comments: The documentation (Manual, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.