Baler Paper baler Waste baler

HSM V-PRESS 860 Plus (2853)

Condition: good (used), Year of construction: 2022, operating hours: 2,806 h, functionality: fully functional, Equipment: Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 liters Longitudinal conveyor: length 2,900 mm, width 800 mm Centrally arranged lubrication strips 24V electronic control – additional electric pump to operate the following functions when the engine is off: "raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Lsdpfx Anjwnfwqoujac Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Special Equipment: Powertrain 310 kW - EV 3-axle drawbar trailer chassis unit Shredding system Size L 600/4 - 30 Z Additional hydraulic connections 35 - 80 l/min Hydraulic drive Rear conveyor 4.9 m Overband magnet neodymium Frame for overband magnet

Condition: ready for operation (used), HSM V-Press 860 baler, year 2008–2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Lodpfx Anera Rbgjueac Feed opening width x height: 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Materials processed: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013–2015, price: €8,000 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 plus, year 2024, price: €10,000 HSM V-Press 860, new/ex-demo, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V/50 Hz Drive power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Feeding type: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Material processed: foil, cardboard Idle cycle time: 25 s

Condition: excellent (used), functionality: fully functional, fuel type: diesel, overall weight: 23,000 kg, Year of construction: 2019, operating hours: 9,563 h, LIEBHERR LH22M. Year: 2019. Hours: 9,563. Hydraulic cab. Four outriggers. Solid tyres. 5-meter industrial boom. 4-meter industrial stick with hydraulic line for attachments. Fitted with stone grapple. CE certified. Excellent condition. Ledpfx Aeyh N Tfjnuoac

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1003203664, Four pieces HSM V-PRESS 1160 & one piece DIXI 60S slightly used the price is per piece Ljdpfoul Uhksx Anujac

Condition: new, Year of construction: 2020, Cantilever racking, single-sided, 6.30m high, 1.20m arms, 900kg per arm – new: Price ex warehouse including loading! 1 racking unit with 4 uprights €3,732.00 (net)! Transport costs within Germany (excluding islands): €490.00 (net)! A cantilever racking system, hot-dip galvanized, consisting of: Lsdsfivg Sepfx Anujac Racking uprights, single-sided, approx. 6,300 mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable racking arms each Load capacity with load center of gravity at 600 mm: 900 kg per arm / 4,000 kg per upright with 4 uprights per arm level: 4 x 900kg = 3,600 kg Profiles: Frame: IPE220, Arms: IPE 100 with longitudinal and diagonal braces e = 1300mm, standard is 1.30m. Other standard lengths available in stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! A small surcharge will be added to the stated price for lengths from 1.50m onwards! Special sizes (different center distances) are also available on request, but they also incur a surcharge and have a longer delivery time as they have to be manufactured to order! If you do not specify any different center distances, we will supply the racking with a center distance of 1.30m. In this case, the length of a racking row with 4 uprights (3 bays) is approx. 4m. Delivery with all screws and nuts (shipping within Germany via parcel directly from Würth), without floor anchors. Other configurations (frame height, arm lengths, arm types, etc.) can be selected! Please contact us!

Condition: refurbished (used), Year of construction: 2008, operating hours: 8,200 h, Doppstadt DZ 750 Kombi - Year of manufacture: 02/2008 - Pre-shredder roller with 21 teeth - 2 x overband magnet - Central lubrication Ledpfxeyxkwwj Anueac - Remote control - Mercedes Benz engine 480 kW (652 HP) at 1,900 rpm - Weight 46,000 kg - Secondary shredding rotor with 36 free-swinging hammers - Screen basket 120 mm (other screen baskets available) - Rear discharge belt 7 m - Rotor with 36 hammers Machine is overhauled and immediately available.

Condition: used, Year of construction: 2014, operating hours: 4,848 h, Liebherr Engine D934 A7 – 140 kW (EPA) Weight: 43 tons Undercarriage EW - Width: 3,800 mm - Track gauge: 4,500 mm - Track pads, triple grouser, 600 mm, D6C, 56 links - Two-piece track guide Industrial monoblock boom, straight, Z1, 9.10 m Industrial stick, tip slightly angled, 7.50 m Hoist cylinder damping Active lowering of hoist cylinder Rod protection for piston rods, energy recovery cylinder Auto-lift Laodpfxeyffm Sj Anuoc Engine automatic shutdown Travel alarm, acoustic, non-deactivatable Proportional control (left): medium pressure circuit Joystick hand rest (raised) Roof window wiper Hydraulic cab elevation LHC 255 (from 3.24 m continuously adjustable up to 5.25 m) Narrow platform for LHC 255 Comfort radio Comfort driver's seat Cab floor window with armored glass Rear area surveillance with camera Work lights cabin front, 2 units, LED 1300 lumens Work lights cabin rear, 2 units, LED 1300 lumens Rotating warning beacon on cab, 1 unit Bypass filter, Liebherr

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Lsdpfjvq Rtkjx Anujac Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: used, Model: HSM V-press 1160 plus baler Pressing force (kN): 59 Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Dimensions (L x W x H, mm): 1780x1150x2985 Power (kW): 4kW Lasdpfxov Al Tis Anuec Weight (kg): 2300 Year of manufacture: 2018-2019

Condition: new, To protect frames against damage, different type new and used version. Do you need shelves or accessories in other compositions or designs, please contact us. Shipping: Please contact us giving your postal code and location, as well as the desired article quantity. Lodpfxsdxqamj Anueac