Throughfeed machining center

Homag Drillteq V-200

Condition: used, machine/vehicle number: 008322, X axis working area: 3050 mm Y axis working area: 1250 mm Fpodpfx Afex A Tmyonjb Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 28 Total number of tool changer positions: 4

Condition: new, Year of construction: 2025, Robland products are built by Werkhuizen Landuyt, located at Bruges, Belgium. BM 3000: • Saw aggregate for slot making. Max depth 10 mm • Left 5 mm bit for drilling • 20mm bit for minifix-system • 8 mm spindle for drill and limited milling applications • 35 mm bit for hinges • The thickness of the panels to be processed should be between 12 and 40 mm • The machine is equipped with a drilling head with 4 chucks and an integrated sawblade • Y axis reach/stroke: Drilling: 900 mm Grooving: 860 mm Fedpfxed Hz Nio Afnjpb Technical data: • Y axis reach/stroke • Drilling: 920 mm • Grooving with sawblade: 860 mm • axis is supported 3000 mm • Z axis plate thickness from 12 mm up to 40 mm • A axis 360° • Movement speed: 20m/min • Min. dimensions workpiece (X) 300x (Y) x 120 x (Z) 12 mm • the machine is equipped with a bore head with 4 chucks and integrated sawblade. • Max/min diameter bore heads 3 mm – 35 mm • Saw blade operates in the X-axis • Max. Depth saw blade grooving: 10 mm • Motor 1 HP 3*380 V / 3*220 V • Minimal required dust extractor capacity 2300 m³/h

Condition: excellent (used), Year of construction: 2021, Working area X: 3050 mm Working area Y: 850 mm Vertical Drilling Unit: 13 spindles Horizontal Drilling Unit: 4 spindles in X, 2 spindles in Y. Grooving Saw in X, diameter 100 mm. Fpedpjx Naz Hsfx Afnob Milling Spindle: 10 kW, HSK-F63 interface, up to 24,000 rpm. 4-position tool changer. Control: HOMAG powerTouch / woodWOP.

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-250-87-1000, NEW THROUGHFEED DRILLING MACHINE DRILLTEQ V-200 (BHX 055) Permanently integrated features: Drilling head with 13 spindles ✓ Horizontal drilling head with 4 spindles on X ✓ Horizontal drilling head with 2 spindles on Y ✓ Grooving saw D=100 mm (X direction) ✓ Positioning cylinder for workpiece positioning ✓ Workpiece clamping system ✓ Workpiece length 3050 mm ✓ Workpiece thickness 12–60 mm ✓ WOODWOP 7 for the machine ✓ Fsdpfx Aew U Ty Ssfnopb Milling motor with frequency inverter 5kW (ETP) ✓

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm Fodpfx Aowka Nysfnjpb End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 0-250-87-6869, Drilling head with 8 spindles (V8 SW/32) Fpodovtyc Hopfx Afneb Horizontal drilling head with 4 spindles on X Horizontal drilling head with 2 spindles on Y Grooving saw D=100 mm Stopping cylinder for workpiece positioning Workpiece clamping system Workpiece length 2500 mm Workpiece thickness 12-60 mm WOODWOP for machine WOODWOP IMPORT DXF BASIC (1 license)

Condition: used, Year of construction: 1985, Weight: approx. 3000 kg Dimensions: approx. 3700 x 2000 x 1600 mm Storage location: Nattheim Fpsdpfx Afjvvi Ttjnob

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Technical specifications: Edge thickness, coil material: 0.4 – 3 mm (material dependent) Edge thickness, strip material: 0.4 – 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 – 60 mm (restrictions possible for certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Configuration: - Motorised pressure bridge adjustment - Pull-out workpiece support XL, spacing 600 mm - LED light at infeed, 3-colour - Motorised infeed fence adjustment - Extended infeed fence, 1,252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool offset Fpjdpfexymd Tex Afnsb - f.a.s.t = fast setting technology - ECO-Mode energy saving function - Prepared for RETURN connection (third-party product) - BS 501 guiding system; precise right-angle workpiece feed for edgebanding of narrow parts on end grain - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 – 450 mm - FG201 jointing unit with 2 milling heads, 64 mm high - MG 301 edge feeder - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° swivelling for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reaction partner (water molecules) from the PUR, allowing uncured PUR adhesive to remain in the system. The pump operates independently of the machine’s power supply and automatically compensates for vacuum loss. - Full control of PUR! - DW 301 pressure unit with motorised NC axis; first roller driven with pneumatic plunge control, 2 conical follow-up pressure rollers - GM301 spray unit after pressure section for high-gloss edges (slip agent) - KA 501 end trimming unit, pneumatic (60 mm) - Extraction hoods for end trimming unit - FR301 MOT6 multifunction milling unit - Shelf program - FF 301 MOT1 profile milling unit - ZK301 MOT4 scraper unit incl. high-gloss kit - FK702 surface scraper - Spray unit for separation and cleaning agent, complete - GM 301 spray unit after pressure section (high-gloss edges) - SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: short notice Location: Hochheim

Condition: new, Year of construction: 2022, functionality: fully functional, Edgebanding machine Hebrock F5 equipped with a PLC control system. It features a maintenance-free, coated rapid-heating glue pot, with pre-set configuration for quick pot changeovers. - 10” touchscreen display Fedewyu Rwopfx Afnspb - Maximum edge thickness: 3 mm - Minimum workpiece length: 160 mm - Feed speed: 7 m/min - Ready for operation in approx. 3.5 min - Maximum power consumption: 7.4 kW - Electrical connection: 400V / 3-phase / 50Hz - Table height: 900 mm - Machine dimensions: 4300 x 1300 x 1400 mm - Approximate weight: 900 kg Options/Extras: • Whispercut pre-milling unit, workpiece height up to 50 mm • Combi cutter head • Corner rounding radius: R = 2 mm • Radius corner rounding: R = 2 mm • Quick change system for corner rounding motor • Multi-radius scraper R2/R1 • Release agent spraying unit • Cleaning agent spraying unit • Edge protection spraying unit • Nesting function for milling unit and radius profile scraper • Pneumatic 3-point adjustment • Multi-tool (R2/R1/chamfer) • Integrated LED workspace lighting

Condition: used, Angular system Weinig Unicontrol 10 (UC 10) for the production of windows, elements and doors. Frame by frame, in series or individual part production with 2 tapping and slotted spindles incl. Oertli tool set * Aggregates: 1. Crosscut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tapping and slotting spindle, NC axis, ø 50 mm, 15 kW, Clamping length: 640 mm (8 x 80) mm 3. Second tapping and slotting spindle, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Profiling unit, horizontal from above, 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Profiling unit, vertical right, 3 kW 9. Profiling unit, vertical right from above, 3 kW 10. Profile milling unit, horizontal from below, NC axis 3 kW * Double part package * Milling package with milling carriage * Automatic turning system * PC control NEXUS * CNC controlled length stop * Studio window facility * Aggregate for edge rounding from below with a crosscut saw * Rung support bar * Incl. suction pipe system * Incl. tool set Oertli * Further technical data and tool drawings on request. Fpedpfx Afev Ag Tdsneb