Used Angular Sawing Plant for sale (9,091)

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional N° 1 Infeed roller tracks (ca.) 18,000 mm + (OPTIONAL: Infeeder with chains) Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 170 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 570 ( Kw 30) Adjustable speed of the saw carriage (QS) (m/min) 1 - 150 m/min Dwjdpfxof Nkv Sj Al Ajc 2° Rear-pusher, with No. 7 (+1) clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 170 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 570 (Kw 30) Adjustable speed of the saw carriage (QS) (m/min) 1 - 150 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels (N° 2 roller conveyors) Typ 68/20 and Typ 58/24 + N° 3 tables with motorised belts: 2 x Typ 255/56/2 and 1 x Typ 27/56) Total power Kw 110 ca.

Condition: excellent (used), Angular sawing plant Numerical Control Cadmatic 4 professional Rollers table for pre-loading No. 1 (mm 2200 x 4400) Lifting table (mm) 2200 x 4300 1st Rear pusher, with clamps No. 4 1st Panel Saw Max cutting width (mm) 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 18) Dwodspuh Dkopfx Al Ajc Adjustable speed of the saw carriage (m/min) 0-150 2nd Rear pusher, with clamps No. 8 2nd Panel saw Max cutting width (mm) 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 18) Adjustable speed of the saw carriage (m/min) 0-150 Front supporting tables with Air blowing system No. 2 With extra long air blowing table to facilitare the evacuation of the cut panels Total power Kw 52.6

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) Dsdpfx Aexvc N Dol Aewc System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Dodpfx Asxvc Rzol Aewc Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Dedpfxjx Aqdcj Al Aewc Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional No. 1 Infeed roller tracks (ca.) 32,000 mm Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 ( Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min 2° Rear-pusher, with No. 14 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 (Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Dwedpfjvnq H Eox Al Aec Automatic unloading System of the cut panels: N° 2 x Liftomat HAU-A 25/12 Automatic Stacking System with 8 stations

Condition: excellent (used), Angular sawing plant Numerical Control OSI Plus - Software Optiplanning N. 2 Pre-loading roller tables (mm) approx. 4500 x 2200 each Lifting table (mm) 4500 x 2200 1° Rear-pusher, with No. 5 clamps/grippers Turning device (rotating unit) at 90° 1° Panel saw (longitudinal) max. cutting width (mm) 4500 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 ( Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min Cutter for shredding trimmings 2° Rear-pusher, with No. 10 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 (Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min No. 2 Front supporting tables with Air blowing system mm 2200 x 1500 Dsdpsukhd Aefx Al Aowc Automatic unloader (bridge) for cut panels "RBO (BIESSE)" Mod. Lifter with 6 stacking stations

Condition: used, machine/vehicle number: 007504, Position 1: Vertical Storage Systems IMA + SCHELLING-AH 6 Dwsdjwuuciopfx Al Aoc Position 2: Angular Beam Panel Saws IMA + SCHELLING-AH 6 Position 3: Panel Feeding and Loading IMA + SCHELLING-AH 6

Condition: good (used), Year of construction: 1994, Window processing line, CNC window manufacturing plant, window angle machine -Manufacturer: Gubisch, Saw unit right left from window manufacturing plant type DST H -Motor: Fimec type H80SB25EF 4 kW / 2800 rpm -Shaft: Ø 30 x 70 mm -Saw blade: Ø 345 mm -Price/Fee: complete -Dimensions each: 470/410/H425 mm -Transport dimensions: 970/500/H425 mm Dwjdpfoyibczjx Al Aec -Weight: 87 kg

Condition: used, Year of construction: 2003, functionality: fully functional, GABBIANI MACCHINE AXIOMA 125 - FULLY FUNCTIONAL - GA1/002132 YEAR 2003 MAX. SAW BLADE DIAMETER: 420 mm Dwodpfxewzbf Rs Al Asc MIN. DIAMETER: 300 mm, BORE: 80 mm SPEED: 3500 SCORING BLADE DIAMETER: 200 mm BORE: 80 mm SPEED: 430

Condition: used, Year of construction: 2016, Angular panel saw with automatic pre-loading and twin pusher system for optimised cutting Dodpsuc Idxjfx Al Ajwc Osi Plus Numerical Control Os Labelling labelling machine with on-board graphic labelling with part drawings Label printing management software Optiplanning Cutting Optimizer Cutting length mm 4500 Cutting width mm 2200 Blade projection 95 mm Motorized rollers for lateral loading on lifting table 4500 x 2200 mm. The translation speed is 10.8 m\min (50hz) - 13.1 m\min (60hz) Automatic recognition of the lost panel (martyr panel) based on the thickness specified in the machine data Low battery stop Automatic side loading buffer. Includes: perimeter nets, double photocell, push-button panel, predisposition electric for the two motorized pre-rollers and the amplification of 4 rollers in place of the fork passages in the pre- intermediate roller conveyor Pre-loading side roller conveyor dim 3800 x 2200 mm with motorized rollers (height from the ground 325 mm) Inertial conveyor for conveying longitudinal trimmings for angular systems 4500 mm (total length 7295 mm) 3000 mm extension to the inertial conveyor to also convey transverse trimmings Long chute for manual conveying of cross-cut trimmings to the centralized inertial conveyor 2050 x 850 mm air curtain discharge table with wheels at the front Air generator up to 6 floors with air curtain MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the transverse plane. The presence of this device allows to reduce from 1830 to 1220 mm is the minimum length of the panels that must be sent for cross-sectioning. Automatic blade shaft bending detection device for angular systems (longitudinal and transversal) consisting of a sensor that detects the deflection directly on the blade shaft and a device that detects the revolutions blade directly on the spindle. Remote cycle start button panel Automatic panel loading via rear lifting table Automatic double aligner with pneumatic cylinders Additional movable lateral aligner on the transverse plane Main blade, max diameter mm, KW 15 Scoring blade, max diameter mm, KW 2.2 Blade carriage speed 1-140 m/min. – BRUSHLESS motors Longitudinal pusher carriage speed 90 m/min. Cross pusher carriage speed 135 m/min. Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the transverse carriage (8 fixed grippers + 2 on the multi-push system) Cutting system for thin panels

Condition: excellent (used), Year of construction: 2005, I sell the complete saw mill angular saw. Manufacturer: Strojcad, Slovakia Model angular saw: UH500 Dwsdpfxewinifj Al Asc Year 2005. Cutting length up to 7,50m. Wood diameter 500mm. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 1996, I sell the complete saw mill angular saw. Manufacturer: WEP Gamota, Slovakia Model angular saw: UP1000 Year 1996. Cutting length up to 13,00m. Carriage suitable for lengths 2,00 up to 14,00m Wood diameter 1000mm. Saw blades 550mm Motors 15 + 18,5 KW Dwodpfx Aswdn Ukol Ajc Very good condition. Available immediately.

Condition: used, machine/vehicle number: 006006, Max. panel width: 2300 mm Max. panel length: 4300 mm Main saw blade projection: 135 mm No of Rip saw Grippers: 7 No of Cross Cut Grippers: 20 Second flexible pusher: yes Dodou Rv Uqopfx Al Aowc Panel Rotation Station: yes

Year of construction: 2026, condition: new, functionality: fully functional, Fully Automatic Board Sorting and Sawing System for Sawmills With its fully automatic board sorting and sawing system, JAC Automation & Robotics GmbH offers a powerful solution for significantly reducing manual operations in sawmills and wood processing companies. The system handles the entire process, from the unsorted raw material stack to the finished, sorted, and stacked boards. A reference system is already in successful operation at a sawmill. Your advantages • fully automatic and autonomous system operation • significant reduction in manual handling • relief from personnel shortages • fewer errors due to incorrect sorting • reproducible quality • automatic stacking • flexible allocation based on length and width Dodpfxezz Sugj Al Aewc • automatic defect detection • modular, expandable design In the current manual process, an employee may have to pick up and move a board up to four times. With the automated system, this handling is completely eliminated. Workpiece range • Length: approx. 1,700–5,200 mm • Width: approx. 95–310 mm • Thickness: approx. 30 mm • other dimensions available upon request Automatic process The raw boards are picked up by a KUKA robot and automatically fed to the measuring and sawing station. Length and width are determined using laser sensors. In addition, boards that are too severely warped can be detected and automatically sorted out. Each board can be sawn at both ends. Alternatively, a pure sorting operation without sawing is also possible. Sawdust and waste are automatically transported via a chute and a conveyor belt to a waste container located outside the system. Flexible sorting The reference system has: • 10 freely configurable sorting and stacking locations • 2 reject locations • 2 raw material locations The operator can freely define which length and width ranges are placed on which stacking location. The finished boards are stacked fully automatically. Optionally, intermediate strips can be inserted between the individual layers. Performance With a high variety of products, the reference system achieves approximately: • 4 boards per minute • up to approximately 240 boards per hour Technology • 2 × KUKA KR 120 R3900-K • 1 × KUKA linear unit • Siemens S7-1500 • Siemens F-CPU • 19" touch panel • WinCC Runtime • Production and piece count recording • Remote maintenance via Weidmüller router • Safety fence and Keyence light curtains Individually adaptable The system is newly manufactured and planned according to customer specifications. Layout, workpiece range, number of sorting locations, and the range of functions can be adapted. Optionally, an expansion with AI-based camera technology for detecting wood defects and quality characteristics is possible. Reference area: approx. 25 × 15 m JAC handles the complete project management, including design, manufacturing, programming, assembly, commissioning, and training. Delivery time: approx. 6-8 months after technical clarification and order release. Europe-wide delivery and commissioning are possible. Price on request.

Condition: new, Year of construction: 2026, warranty duration: 12 months, Angled Cutting for Single Boards and Packs of Boards: Efficiency and Precision Without Compromise The TRGSI, just like the TRSI, is a monoblock system designed to ensure outstanding installation speed and effective vibration reduction. A true innovation powerhouse for achieving flawless results in record time! Programmed Cutting for Single Boards and Packs Fixed Measurements and Customized Sequences: Thanks to the ability to manage various cutting schemes, it’s easy to set up fixed or sequential cuts, optimizing every operation. Industrial CNC Technology: An advanced system that allows for the quick storage of different cutting plans. Up to 25 different measurements can be managed simultaneously, with angled heads and independent options for every specific need. Customizable Cutting Programs: Work parameters (such as quantity and waste) are easy to set and can be customized according to individual preferences. Each cutting plan can be saved for quick access. Easy Program Loading: Cutting programs can be uploaded via USB in just a few steps, with files in .txt format for practical and fast management. Advanced Optimization: Two cutting versions to maximize efficiency: OL Version optimizes length, while the E Version offers total optimization, minimizing waste. Operating Dynamics Fast and Precise Movement: The steel guide with ball recirculation and dual sliding carriage, powered by brushless motors, ensures unmatched speed and accuracy. Durability and Perfect Sliding: The reinforced structure ensures optimal sliding, increasing the system's durability and reliability. Pneumatic Pusher: Equipped with fully protected and highly visible stroke, the pneumatic pusher system ensures maximum control and precision. Perfect Angling and Precision: The synchronization between the lateral arm before the blade and the pneumatic presses guarantees a perfect cut, both in quality and angle. Dwedpov Iqd Rjfx Al Aec Advanced Accessories for Loading and Unloading With dedicated accessories, the system can be configured for manual or fully automatic loading and unloading operations, ensuring an uninterrupted workflow.

Condition: used, machine/vehicle number: 005456, Max. panel width: 2200 mm Max. panel length: 4500 mm Dwedpfxswuz Dys Al Ajc Main saw blade projection: 123 mm No of Rip saw Grippers: 8 No of Cross Cut Grippers: 5 Second flexible pusher: yes Panel Rotation Station: yes

Condition: used, machine/vehicle number: 008402, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 110 mm No of Rip saw Grippers: 9 No of Cross Cut Grippers: 4 Dwsdpoygtbmsfx Al Aec

Condition: used, machine/vehicle number: 008498, Max. panel width: 2200 mm Max. panel length: 3200 mm Dedpfozvv U Hjx Al Ajwc Main saw blade projection: 123 mm No of Rip saw Grippers: 4 No of Cross Cut Grippers: 10 Panel Rotation Station: yes

Condition: like new (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, saw blade bore: 800 mm, Equipment: saw blade guard, scorer, We offer for sale a modern CNC miter saw, Easy Cut 828 PLUS, manufactured in 2023, designed for professional production of wooden structures, roof trusses, frameworks, and other wooden components. The machine is in excellent technical condition and ready for immediate use in production. Main advantages of the machine: ✔ CNC control with a touch screen, easy operation, and the ability to load projects via USB, LAN, or Ethernet. ✔ Automatic linear material feed using a servo motor. ✔ Cutting at any angle with 4 controlled axes. ✔ Cutting materials up to 13m in length. ✔ Rotating the saw blade 360°. ✔ Tilting the blade from 90° to 38°. ✔ 15m input conveyor. ✔ 5.5m output conveyor. ✔ Saw blade diameter of 800 mm. ✔ Automatic optimization of cuts with minimal material waste. ✔ Marking of cut parts directly on the machine. ✔ Pneumatic horizontal and vertical material clamping. ✔ High accuracy, speed, and safety. ✔ Manual and fully automatic operating modes. ✔ Online service support via internet connection. ✔ Full compatibility with MiTek software for truss production. Djdpszlrn Ujfx Al Ajwc Technical solution: The machine consists of an input conveyor, a CNC sawing unit, and an output conveyor. The material feed is provided by a servo motor with high positioning accuracy. The sawing unit allows for cutting precise lengths and complex angular cuts with an adjustable center axis.

Condition: used, machine/vehicle number: 005711, Max. panel width: 4500 mm Max. panel length: 2200 mm Main saw blade projection: 95 mm No of Rip saw Grippers: 5 No of Cross Cut Grippers: 8 Dwjdpfxsy Nk Dfo Al Aec Second flexible pusher: yes

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 200 mm, The Marinus Powermax Chevron is an advanced machine line for head-end machining tongue and groove on Hungarian-point (Chevron) and herringbone parquet. Several wooden parquet boards can be loaded into the infeed cassette, after which the process runs automatically. First the boards are pre-cut to the corresponding length and angle in the cross cut saw unit, then they go via conveyor to the Chevron machine. Before the profiling takes place the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. Resulting in high profile accuracy with no noticeable edge on the top side when the boards are fitted together. The two arms on which the profiling heads slide back and forth are sturdy built and driven by servo motors, which guarantees that all the boards have exactly the same length and angle. The lengths and angles are stepless adjustable via the user friendly touch screen panel. This clamping system combined with two pre-cut aluminium backing blocks effectively prevents blow-outs and splintering. Lengths: 350 - 1200 mm Widths: 50 - 200 mm Thicknesses: 8 - 22 mm Angle: -45° to +45° Dwjdpfx Aljiv R Hhj Aoc Capacity: Up to 10 boards per minute Length modes: Fixed lengths This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: like new (used), Year of construction: 2005, I sell the vertical band saw mill Primultini SGD, Year 2005, line almost with zero working hours. Canali carriage mechanic + pneumatic. Compressor with air tank included. Sharpening workshop included. Condition like new. Dsdpezkb R Njfx Al Aowc Available immediately.

Condition: excellent (used), functionality: fully functional, Complete Cheese Plant located in Ireland available immediately. Current cheese production setup: Cheese blocks are in a 60 kg format to match the process floor moulds, x30 blocks of cheese per vat, x20 vats per run x1.8/vats equals 36.0 tonnes of cheese in 24 hrs. Milk treatment room: Milk separator (originally the milk clarifier) - 22000 ltr Milk Bactofuge - 22000 ltr Plate plant including pasteurization section - 22000 ltr Regens 1+2 from 4C to 30C - 22000 ltr Tetra alfast system (online milk STD) - 22000ltr Whey room: Whey Clarifier - 22000 ltr Whey cream separator - 22000 ltr Whey cooling plant - 22000 ltr Whey cream storage and cooler - 5000 ltr x2 RWBT: RWBT 1 - 30000 RWBT 2 - 30000 Vats: Vats 1 APV 22,000 ltr - Installed Prior 2006 Vats 2 APV 20,000 ltr - Installed Prior 2006 Vats 3 APV 20,000 ltr - Installed Prior 2006 Vats 4 APV 22,000 ltr - 2007 SPX rennet dosing system x2 curd pumps: Old curd pump 22000/Hr - N/A New curd pump 22000/Hr - 2007 x2 pre-presses and block format: Press-vatic 1 1.8T/hr - 2007 Press-vatic 2 1.8T/hr - 2007 x5 main presses: Press 1 - 0.45T/hr - 2007 Press 2 - 0.45T/hr - 2007 Press 3 - 0.45T/hr - 2007 Press 4 - 0.45T/hr - 2007 Press 5 - 0.45T/hr - 2007 Dwjdezzd Dmopfx Al Aec x4 holding tables: Holding table 1 - 2007 Holding table 2 - 2007 Holding table 3 - 2007 Holding table 4 - 2007 Demoulding unit and washer: 2007 MF plant (brine) x1 unit: 1146 litres/Hr - 2007 Brine: Automated crane - Timed/programmed - 2007 Brine basin 1 (14 racks per basin) - 12.6T - 2007 Brine basin 2 - 12.6T - 2007 Brine basin 3 - 12.6T - 2007 Brine basin 4 - 12.6T - 2007 Brine basin 5 - 12.6T - 2007 Brine basin 6 - 12.6T - 2007 Brine basin 7 - 12.6T - 2007 Brine basin 8 - 12.6T - 2007 Brine basin 9 - 12.6T - 2007 113.4T brining capacity Brine mixing silo: x1 mixing tank and auger - 3000 - Prior 2006 Cut and pack room: Ferrai machine (block cutting options) - 5T/Hr - 2017 Cryovac machine - 5T/Hr - 1980 Metal detector - 5T/Hr - Around 2006 DEM labeller - 5T/Hr - 2018 Bypass - 4T/Hr - Around 2010 Robots x2: Fresh (brined cheese) - 5T/Hr - 2007 Mature(ripened)/deboxing - 5T/Hr - 2007 Whey: Liquid whey volume generated per hour or per vat is around 17,500 litres. Solids 6/7%. Kg's of fat removed from the whole milk: Determined by the standardized fat required in the cheese, typically 700-800 litres per hour generated. AVAILABLE IMMEDIATELY. CAN BE VIEWED AT SHORT NOTICE

Year of construction: 2026, condition: new, FABO Mobile Scalper screen is produced for aggregate producers who require higher productivity and versatility. The machine can be used for multiple purposes; it can be used as a heavy-duty incline 2 deck screen, capable of stockpiling, scalping before and after crushing units, or it can be used a standalone system as well. That is why FABO tracked mobile scalpers can separate the hardest materials. FABO Mobile Scalpers helps our customers to maximize productivity while on the other hand helps on reducing the production costs. - - - Technical Specifications of the Tracked Scalper Screen: - *Bunker capacity :7m³ - *Production capacity : 220 – 400 Tons per hour - *Vibrating Screen Size : 1530x4800 mm - *Total Power : 110 kvA - *Screen Media : Punch Plate, Grizzly, Bofors Djdpfx Aljzfp Dae Aewc - *Weight : 31.000 kg - *The screen angle varies between 18-27°.