Welding Table

HISWeld HIS28V33015 - Aktion

Condition: as good as new (ex-display), Year of construction: 2022, 1.0 ft. Ultrasonic Cleaning Device Manufacturer: AIR FRESH SERVICE INDUSTRIEFILTER Type: 1-Chamber Cleaning System Inner Tank: 750 x 600 x 770 mm Year of Manufacture: 2022 Ksdpjv Nztxjfx Afgslt THIS DEVICE HAS NEVER BEEN USED.

Year of construction: 2008, condition: good (used), machine/vehicle number: 431808, Lg.No. 18177 Hydr .flat profile and bar shear with notching device and hole punching machine Technical data: - Flat steel shear cuts up to 375 x 10 mm - 220 x 20 mm - section steel shears - cuts L-steel at 90° up to 130 x 13 mm - steel bar shears - cuts round steel up to 45 mm - square steel up to 45 mm - notching device - with square notcher 100 x 42 x 10 mm - punching machine - punching force 600 KN - with stop table - throat 300 mm Kjdpfx Afemidyiogolt - punching in steel up to 28 mm Ø in 15 mm - or 34 mm Ø in 12 mm - manual length stop - drive 400 V / 4 kW - space requirement approx. W 600 x H 1550 x D 1500 mm - weight approx. 1300 kg

Condition: new, table length 1220 mm table width 760 mm table height 910 mm Kjdpfx Afexqrhlegslt weight 226 kg

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides Kedpetk It Ssfx Afgolt rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: new, table diameter 900 mm table load 1,0 t swivelling range 135 Grad turning speeds 0,12 - 1,2 U/min 820 mm welding current 500 Ampere total power requirement 0,75 + 0,55 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 1,5 x 1,0 x 0,9 m • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. Ksdjfv Axxspfx Afgslt • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: new, Year of construction: 2025, Hand-held laser welding machine Fiber Innovation Laser Laser power: 1500W - 3000W 2-year warranty. Warranty and post-warranty service included. Stock of spare parts and consumables maintained. From order to commissioning in as little as 5 working days. The hand-held fiber laser welder is a modern alternative to TIG and MIG/MAG welding, designed for both thin and thick materials. Compared to conventional methods, laser welding delivers up to 4x faster cycle times, significantly reduced heat distortion, and welds that require no additional post-processing. Welding thin aluminium and stainless steel is straightforward and repeatable — unlike TIG, which demands a highly experienced operator. The machine supports single or dual wire feeding, enabling larger gap bridging and a wider weld bead when needed. Technical parameters (1500W / 2000W / 3000W): Kedpjt Al Txofx Afgslt - Laser wavelength: 1070 nm +/-10 nm - Maximum power consumption: 8 kW / 10 kW / 13 kW - Cooling system: water-based - Operating voltage: 400V 16A / 400V 32A / 400V 63A - Penetration depth: 0.2-2 mm / 0.2-3 mm / 0.2-4 mm - Dimensions: 1000 x 450 x 750 mm - Weight: 80 kg / 90 kg / 100 kg The price includes: - Integrated water cooling system - Raycus laser source - Touch screen with Polish-language menu - Ergonomic plastic welding head - Single / dual wire feeder (optional) - Instruction manual in Polish\English - CE Declaration of Conformity Weld samples can be produced on request for the customer's specific workpiece material. Machines are available in various configurations, working ranges and laser power outputs. The listed price applies to the CX-CS1500-H (1.5 kW) model with single wire feeder. Actual appearance of individual components may differ from images shown.

Condition: new, functionality: fully functional, Year of construction: 2023, New Sunrise punch cutting machine IW-45K available from stock. Specifications IW-45K tonnage 45ton punching capacity ᴓ 22x15mm/ᴓ 40x8mm discharge 165mm angle bar 75x75x6mm 90⁰ strip 300x10mm Weight 870 KG Dimension 1050x760x1490mm Multiple models available from stock. Ksdpfx Afevf I Ibjgelt

Condition: new, table length 1300 mm table width 800 mm table height 920 - 1000 mm 1000 kg height of stroke 510 - 1550 mm total connected load 1,5 kW connected load frequency 230 V weight of the machine ca. 0,55 t Welding table on lifting table: Hole diameter: 28mm Klodpfsvn U Exsx Afgjt The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement.

Year of construction: 2018, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: 1CY1116D00007, DONALDSON dryer Buran DC 0125 AB with electronic control with electronic level-controlled steam trap Technical specifications: Model: BURAN DC0125AB Medium: compressed air, free from aggressive components Flow rate: 2.08 m³ / min Operating pressure: 7 barg Pressure dew point: 3 ° C Compressed air connection: 1 " Electric power supply: 230 V / 50 Hz / 1 phase Frequency: 50 Hz Dimensions, weight Height: 645 mm Width: 360 mm Length: 410 mm Weight: 34 kg Kledsdy Dqkjpfx Afget

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 4400 € 2400 x 1200 mm 850 mm 8000 kg Klsdpfowiriisx Afgot 945 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners NOW AVAILABLE AS AN ATTRACTIVE PROMOTIONAL PACKAGE: INCLUDES 36-PIECE STARTER SET INCLUDES 12-PIECE HISWELD PACK 2 PROMOTIONAL PRICE € 5.120,00 (INSTEAD OF € 6.208,00)