Drum motor 2800 rpm

Himmelwerk DMot 2Ug 177/200

Condition: good (used), Year of construction: 1994, functionality: fully functional, power: 75 kW (101.97 HP), Low-speed rotor with push floor Rotor width 2500 mm Nedpfxstgqlyj Ahyjwf Rotor diameter approx. 400 mm Motor 75 kw Discharge via conveyor belt with magnetic roller

Condition: new, Year of construction: 2026, Mini Crawler Crane TB5000 A mini crane on a crawler chassis designed for indoor and outdoor work. Maximum lifting capacity: 2400 kg. * radio control of the device - driving, working, spreading the feet * double power supply of the crane - diesel and electric 230 V * maximum lifting capacity - 2400 kg * anti-overload system as standard * maximum horizontal reach over 11 m * four hydraulic extensions + 1 manual extension * maximum vertical reach over 13 m * 4 hydraulically lowered supports Nwsdpfsibqrajx Ahyof * weight approx. 2200 kg * height approx. 195 cm * width approx. 88 cm * active arm 16 degrees Additional, optional equipment: * search hook * hydraulic winch 990 kg * Li-ion battery power supply * pads for support feet * hydraulic FLY JIB Available in the selected color.

Year of construction: 2002, condition: good (used), functionality: fully functional, Drum dryer for wood sawdust and chips with capacity up to 15t/h. Nwjdpfevx S Hnjx Ahyof Condition - fully functional.

Condition: excellent (used), the plant is consisting of: - 2 chain separators - 2 55 cbm³ silos with discharge screws - 2 discharge screws - 4 mixing and homogenising chambers, - 5 conveyor belts - 2 double-shaft extruders connected in parallel - 1 double shaft mixers Nwjdpfjlxzl Eox Ahyjf - container for liquid extracts, etc.

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Nodpfxjlhwr Re Ahyewf Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 36 Ratings ✈️ Free shipping : 25 days delivery ✈️⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✅✅✅Energy class A+++✅✅✅ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ✅MC 9 ►Number of filters: 9 ►Filter dimensions: 1850 * diameter 160mm ►Suction power: 4500 m3/h ►Electric motor power: 3 KW / hour ⭐Offer Price €6,000 EXCL.SHIPPING*⭐ ✅MC 17 ►Number of filters: 17 ►Filter dimensions: 1850 * diameter 160mm ►Suction power: 6500 m3/h ►Electric motor power: 5.5 KW / hour ⭐Offer Price €6,850 EXCL.SHIPPING*⭐ ✅MC 26 ►Number of filters: 26 ►Filter dimensions: 2500 * diameter 160mm ►Suction power: 8500 m3/h ►Electric motor power: 7.5 KW / hour ⭐Offer Price €9,000 EXCL. SHIPPING*⭐ ❗❗❗Apply dozens of colors in your cabin.❗❗❗ ► Would you like to reuse the sprayed paint ❓ In this case, in filtered booths, you need to use different filters for each color. If you use a monocyclone you save on filter costs and can easily reuse the sprayed paint. ⚡️⚡️⚡️Upgrade your existing filter cabinet with a monocyclone. This way you don't have to resort to different filters when using dozens of different colors. ✳️Why a monocyclone ❓ ✨1 - According to the opinion and advice of environmental controllers, it is the better choice. Because a monocyclone does not need a connection for a trigger. ☘️ Nwsdeggx E Dspfx Ahyef ✨2 - A monocyclone ensures occupational safety.⚠️ In the event of a filter breakdown in filter cabins, the ventilation ducts can be blocked with powder paint. This blockage can cause a fire. Mono cyclones avoid this possibility. ✨3 - Green Technology. ♻️ Drilling your filters into filter booths creates a situation where paint is sprayed into your paint shop. Your workshop gets dirty and paint particles fly into the air you breathe. The mono cyclone reduces the pollution in the paint shop and provides a better ecological environment for the health of the employees and for the environment. ✨4 - Provides quick color change⌛ This saves time and paint, as the booth can be cleaned quickly. ✨5 - Economical☀️ The mono cyclone bag filters do not require color changes. It offers reusability with its washable feature. ✍️✍️Order the right mono cyclone for your current cabin now. ⚡️⚡️⚡️Our mono cyclones have their own control panels. They are supplied with 2 suction funnels, suction hoses and connecting clamps for connection to your existing filter cabin. ‍⚕️‍⚕️‍⚕️ ►►You can easily mount your mono cyclone with 2 holes on the back wall of your filter cabin. ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Year of construction: 1997, condition: good (used), Type: DDA:VP-370:A27097 Trough: approx. 3,000 x 660 mm Nwedpfx Aot S Sxgohyjf Screw diameter approx. 370 mm Drive via geared motor

Condition: reconditioned (used), Year of construction: 1998, The redom SE200 used separation table is fully operational, can be seen and is available on site in Poland. In 2019, the machine underwent a thorough renovation. The Redom separation table works on 3 basic principles, eccentric speed, airflow and the angle of inclination of the table. From the market-leading Redoma company, now part of Eldan's recycling machine company, the SE200 has a throughput of up to 2000 kg/p/h. Suitable for all types of dry electric granulated, the SE200 table used produces 99.5% pure copper product. Simple to set up and use, the Redom SE200 has an eccentric 3 kW power unit and an 11 kW blower motor. Redoma SE200 Dimensions: Nwjdpfxein Ndwj Ahyef Length: 2.7m Width: 1.8m Height: 2.2m Weight: 1,700Kg

Condition: new, lifting height: 15,800 mm, Year of construction: 2015, operating hours: 1,465 h, General information Field of application: Construction Drivetrain Make of engine: Yanmar Weights Empty weight: 2.800 kg Functional Lifting capacity: 3.150 kg CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Delivery terms: EXW Transport dimensions (LxWxH): 3,15x0,75x2 Latest inspection: 2025-10-09 Nwedpfxjxphkgs Ahyef Production country: NL Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Hoeflon C6 * 2015 * 1465 working hours * Diesel and 230-volt drive * 15.8-meter working height * 13.7-meter horizontal reach * 75-cm clearance width * 3150 kg lifting capacity * Remote control * Equipped with new undercarriage! * 2800 kg net weight * Inspection valid until October 2026 * Includes all documents

Condition: good (used), 1 used radial drilling machine manufactured by Stimin type GR 820 H No. 773 year 2004 Technical data: Drilling capacity 80 mm throat 1600 mm Nedpfxetzctme Ahyewf Drill spindle holder MK 6- drill spindle stroke 390 mm Spindle speed, 24 steps 20 - 1400 rpm Clockwise and counter-clockwise rotation Feed rate, 12 steps 0.045 - 1.5 mm/rev Drive 400 V / 14.5 kva Clamping of the arm and drilling unit electromechanical Distance machined machine bed - drilling quill min. approx. 400 mm max. approx. 1800 mm usable machine bed with 4 T-slots 1170 x 2185 mm Coolant device 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg