Four Column Press - Hydraulic

Hidrobrasil 300 T Mineralsteinpresse Steinpresse

Condition: like new (used), functionality: fully functional, Hydraulic punching machine Brand: Boschert Model: Ecco Line EL 500 Digital Fodpsrn Swksfx Afnjpb Features: Punching force: 28 t Work table dimensions (width x length): 500 x 1000 mm Maximum sheet thickness: 6 mm (up to a punch diameter of 40 mm) Maximum die diameter: 105 mm (up to 1 mm sheet thickness) Maximum number of strokes: 180 strokes/min Switch-on value: 5 kW Voltage: 3 x 400 V / 50 Hz Total weight: 2 tons Dimensions of the EL-500-Digital punching machine (length x width x height): 2400 x 1580 x 1540 mm Tool cabinet, 4 tool drawers Foot pedal Includes all the accessories shown in the pictures.

Condition: good (used), Year of construction: 2004, Comm. no.: Lg 34522 high performance punching press HAULICK+ROOS ROS 500 - 1250 used, in good condition year of construction 2004 (without sound insulation cabin) with - infinitely variable drive - 2 connecting rods power unit - pneum. Clutch-brake combination - stroke adjustment - screen control Siemens PC 670 - oil circulation lubrication Technical data Pressing force max. 500 KN Stroke rate 30 to 900 min.-1 stroke 12 to 60 mm Installation height (max, stroke un U.T.) 320 mm column width 1.250 mm Table area 1.250 x 730 mm Drop-through opening in table 1,160 x 140 mm ram area 1.250 x 450 mm ram adjustment 60 mm Drive power 26 kW Weight approx. 11,000 kg Dimensions (L x W x H) approx. 2,800 x 1,300 x 3,250 mm Equipment and accessories: Fpsdpsip Uqmofx Afnob Servo roll feeder VAMCO SP 150 Year of manufacture 2014 Passage width max. 150 mm Material thickness max. 3.0 mm

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25.4 [mm] - Max. machining length : 195 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 8.2 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 25.4 [mm] Fpedsuha U Hepfx Afnjb - Spindle speeds : 10000 [rpm] - Spindle power : 8.2 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 9 - Number of motorized positions : 4 - Live tools speed : 5000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 8 SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 7500 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2.912 x 1.300 [mm] - Machine height : 1.720 [mm] - Machine weight : 2.400 [kg] MACHINE HOURS - Number of hours under power : 44140 [h] - Number of working hours : 28118 [h] - Number of spindle hours : 15281 [h] EQUIPMENT - CNC : Fanuc 31i-B - 3 colors status lamp - Rotating tool motor on : S11, S51 - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor - Coolant tank : KNOLL KF 200/1200 * with high-pressure pump - Bar loader : Tornos Robobar SBF 326 - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Year of construction: 2018, condition: new, Freeze dryer completly new. Pilot plant. Capacity:1 kg / 8hrs Effective Area :0.15 m2 Fpsdpfx Asfn Iudjfnsb Wet Input per 8 hr: 1 Kg Dry Output per 8 hr: 0,2 Kg Temp Range Drying: 30 ºC - 100 ºC Water Removal Capacity: 0,8 Kg Ultimate Condenser Temp: -40 ºC Defrosting Method: Natural Total Connected Load : 1Ph/15 Amp Connection Average Connected Load: 1Ph/15 Amp Connection Plant dimensions: 1,1m*0,7m*1,5m 1. Freeze Drying Capacity: Wet input 1 kg. per shift. On a higher side, each shift shall be of 8 to 8.5 Hrs. The wet input can either be biological cultures, enzymes, polymers, extracts, sprouts, vegetables, fruits, nutraceuticals, herbs, spices, sea foods, instant curries/gravies etc. of minimum 15% solids. 2. Residual moisture: Final moisture content on the product shall be less than 4%. 3. Compressed air: Maximum pressure 5Kg/Sq.cm. Flow rate 3 cubic Meter/Hr. Material: Stainless steel 304 Flow rate vacuum pump: 13 m3/h

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Art.no.: 3680013 Condition: New machine Cutting range (round): 230 mm cutting speed: 35/70 m/min standard equipped with: - horizontal vice - length stop (600 mm) - Monitoring of saw band tension, electromechanical - chip clearing brush - coolant device - operating instructions Fedpjcuntzofx Afnspb

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Fsdpovwlqqefx Afnopb Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2015, Complete robot welding cell with rotating table and enclosure Robot: KUKA KR 150 R2700 extra Load capacity: 150kg reach: 2.090mm with welding gun (Dalex, new in 2018) with cooling device (water cooling in circuit) complete second welding gun (make ARO) included own cooling unit built in the machine automatic rotary table with 10-fold division (at present for running product only 5-fold built up) Workplace for parts insertion or disposal well illuminated and protected by light barriers Control of the complete line by means of Siemens SPS, provided by company HS Automation Siemens control panel for system operation at the insertion station mounted on a swivel arm All together in an enclosure with safety door. Fpedpenr E Enefx Afnjb Plant can still be visited in operation.

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Fjdpfxskvnume Afnepb Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.12.15, Fresan FP 100P - C Frame Eccentric Press - 100 Tons (1000kN) TECHNICAL DATA: * Power: 100 tons (1000kN) * Strokes Per minute: 60 (variable) * Ram-Table Distance: 445 mm Fsdpfjnxh T Rsx Afnopb * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

Condition: used, HYDRAULIC DOUBLE COLUMN PRESS CAMP 250 tn Double column press Fpedpfsgr Ur Rjx Afnjb Pressing power 250 tn Stroke of the piston 500 mm Table size 570 x 570 mm Distance from table to piston 600 mm Distance between uprights 570 mm Approach speed 95 mm/seg Workin speed 7.5 mm/seg Retraction speed 135 mm/ seg Engine power 30 cv