Single Column Press - Hydraulic

Hidralmac 400 Tonnen Salzpresse Mineralsteinpresse

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Hjdpfxovwlqqe Ah Nefb Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Hsm HL 4809 LI baler - Large filling opening, ideal for big boxes - Container tipper for convenient filling Pressing force in kN: 480 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 400 kg Hfjdera Dddspfx Ah Njb - Bale dimensions (length x width x height in mm): 1200 x 1100 x 750 - Machine dimensions (length x width x height in mm): 5648 x 1849 x 2515 Idle cycle time in seconds: 53 - Manual tying: 4 times with wire

Condition: as good as new (ex-display), Year of construction: 2022, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. Hjdpfx Ahsph Uk Ne Nofb The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: like new (used), 12fill VMP semi auto filling machine semi auto filling machine with volumetric dosing system, ideal for pastes, creams, sauces and pates, 100ml to 1000ml, up to 25 fills per min, mobile frame with foot pedal Hfedpfx Ahehpqvye Nsb

Year of construction: 2004, condition: ready for operation (used), Connected load: 15.5kW, weight: 6.8t. Hsdpfxsip D Rzo Ah Nofb

Condition: good (used), machine/vehicle number: 630, with (away-)swivelling vertical head table size 300 x 1.430 mm table travel: longitudinal (X-axis) 1.000 mm vertical (Z-axis) 520 mm crosswise (Y-axis) 360 mm Installation height under milling spindle approx. 500 mm overhang of the milling spindle min./max. 350 mm Spindle mounting SK 40 spindle speed 25 - 1.200 rpm feed/rapid feed 12-900 mm/min Hedpsbq Rugsfx Ah Njfb spindle drive approx. 3 kW total drive 3,4 kW - 380 V - 50 Hz Weight 2.400 kg

Condition: used, Year of construction: 1991, pressure 400 t stroke 300 mm table surface area 1200 x 700 mm ram surface 1200 x 700 mm dayligth 500 mm adjustment of stroke 300 mm return capacity 348 kN capacity of ejector 100 kN Hsdpfx Ahstqqlco Nofb ejector stroke 100 mm control SIEMENS Simatic S 5 total power requirement 65 kW weight of the machine ca. 28 t dimensions of machine L x W x H 4,4 x 2,75 x 4,0 m = Frame press Accessories: tool changing table - with cutting shock absorption damping force 4000 kN damping stroke 5 mm spindle adjustment 200 m

Condition: as good as new (ex-display), Year of construction: 2015, machine/vehicle number: 4293, pressure:40 t Hfedpodxrqxefx Ah Njb table length:1000 mm table width:700 mm daylight opening:1200 mm No. of Cylinders:1 St. stroke length max.:1200 mm table height over floor:700 mm table extendable:1200 mm Speed of table:25 mm/sec Table tilting:45 Grad table load:5 t Fold-down upper tool:170 Grad :1250 x 1000 mm :95 mm/sec speed of return flow:80 mm/sec working speed:0 - 10 / 10 - 155 mm/sec dimensions:4300 x 2700 x 4500 mm total weight:8,5 t Monitor Siemens:9 Zoll :1200 mm

Year of construction: 2020, condition: new, machine/vehicle number: DF0240 - Rev.00, pressure:300 t passage width:600 mm stroke:500 mm Weight of machine approx.:8,5 t dimensions:ca. 2275 x 1650 x 4050 mm Return Capacity:30 t Engine Output:30 kW Max Working height:800 mm Approaching Speed max. :10 mm/sec Pressure Speed:10 mm/sec Travel:500 mm Ram plate:600 x 600 mm Table size:600 x 600 mm Table height above ground level (approx.):850 mm Oil Tank Capacity:350 l Hfedpfxedxvfko Ah Nob Oil cooling (electric):1,5 kW (max) ejector stroke:250 mm pressure of ejector:50 t Maintenance Balcony:2.800 ? Drip pan to prevent oil spil:2.800 ? Upper and lower tooling (for 8kgs salt stone):11.000 ? automatic filling with 500 kg depot:58.000 ? speed increase to 80 mm/sec:19.000 every additional meter conveyor belt:850 ? Light barriers front and back:6.800 ? Side trim:4.200 ? 7m roller coaster-for salt stone transport and interim storage:12.900 ? Faster Version with approach and working speed at 60mm/sec ist available on request. Price (excl. options): 117.500,--

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive, solar cable -Manufacturer: Aurora, PV inverter unused from stock liquidation ovp Hfodpfx Ahjfdxqve Nsb -Type: PVI-2000-OUTD-DE -Max. Continuous output power: 2000 W -Price per piece -Quantity: 26 pieces -Dimensions: 420 x 310 x 144 mm -Weight: 12kg/pcs