Press brake

Hess LAMIELLIEPRESSE

Condition: used, Year of construction: 1985, Weight: approx. 3000 kg Dimensions: approx. 3700 x 2000 x 1600 mm Ihsdsvvi Ttjpfx Ah Net Storage location: Nattheim

Condition: excellent (used), Year of construction: 2012, Set for finger jointing in medium and mass production. The machine is technically efficient and in good condition. Several sets of tools are included. Characteristic: – industrial set with one tenoning machine. Loading the package under the supervision of the operator enables the processing of inferior raw material, – sensitivity controlled by microprocessors /automatic control/, – turning the package after 1 treatment on the turntable (sharp connection) or turning the package on the back (furniture joint with a line; unique GOMA solution), – the set includes an automatic station for loading the press, – the possibility of using cuts on the press, Tenoner with feed table Data Values Milling spindle fi 50x210 mm Spindle speed 6000 rpm 18.5 kW motor Tool dimensions fi 250x160 mm The saw spindle aligns the face Special chipper fi 300x8 mm Ihsdpfx Ahelu D Tfj Nst 6 kW / 3000 rpm motor Stepless feed table Working width x working height 600 x 30-160 mm Glue nozzle outline by tool PRESS FC-10 PZ6/2 Data Values Board width 30-160 mm Jufefe Board thickness 20-70 mm The length of the finished board is 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic power pack 3 kW / 140 bar

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 Ihodpfx Aomgc I Njh Not - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter Ihodpfet R T Hcox Ah Nst 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: excellent (used), Line for door jambs (frames), with END-CUTTING, ROUTERING for COUNTER-PLATE and HINGE INSERTION (Anuba). Composed of: X10030A) Loading Conveyor X10030B) Transfer Conveyor X10030C) Double-end cutting and drilling machine "AMS" - Left-side Cutting 45° - Drilling - Cutting 90° Ihsdoqwyclspfx Ah Nst - Right-side Cutting 45° - Drilling X10030D) Angular Conveyor (90°) X10030E) Anuba Inserting Machine "MASTERWOOD" Mod. MULTITEC X10030F) Strike Plate Routering Machine "MASTERWOOD" Mod. Teknomat 3000

Condition: excellent (used), Year of construction: 2003, Double end tenoner Celaschi 4+4 motors Opening side up to 3000 mm Ijdpfx Asvx Afnsh Nsht

Condition: used, Planing and moulding machine Weinig Hydromat 2000 for four-sided planing and profiling of wood with grooved bed, without soundproof cabin. * Spindles: 5 spindles: 5 spindle 1: Bottom / 7.5 kW spindle 2: Right / 7.5 kW * Spindle 1: Bottom / 7.5 kW spindle 3: Links / 11 kW spindle 4: Bottom / 11 kW spindle 5: Top / 15 kW * Spindle 2: Right / 7.5 kW working width: 230 mm working height: 160 mm spindle diameter: 50 mm * Spindle 3: Left / 11 kW * Spindle 4: Bottom / 11 kW * Spindle 5: Above / 15 kW * working width: 230 mm * working height: 160 mm Ijdpfx Ahsrmvhfj Nsht * Spindle diameter: 50 mm

Condition: new, Working width 3500 mm Working height 2300 mm Isdpfsd Rzc Rox Ah Neht Number of cylinders 4 St.

Condition: good (used), Various cardboard shears in stock, working widths from 110 to 150 cm, in good condition, available immediately Ijdoh S H Itepfx Ah Nsht

Condition: excellent (used), Year of construction: 2015, Stravis sawmill line with Jabłoński automatic edger after complete renovation. Condition like new. The line consists of: Iedpfx Asv Iyhfjh Neht 1. Log conveyor for 5m logs with a cascade feeder 2. Caterpillar-chain saw 110 + 90 kW 3. Multi-blade saw (2 x 75 kW) spindle diameter 80mm 4. Roller conveyor l- 6m with a mechanism for stopping the movement of the left prism 5. Crosscut saw from 0.8 m to 5m 6. Base conveyor 7. Roller conveyor l=3.5m 8. Driven roller conveyor 4.5m 9. Driven roller conveyor l=4.0 m with a board dumping mechanism 10. Transverse belt conveyor b=3m, l=5m 11. Transverse belt conveyor with a pick-up b=2m, l=5m 12. Longitudinal belt conveyor b=0.4m, l=5m 13. Automatic edger Jabłoński 14. Gooseneck Jabłoński 15. Cross feeder with a scanner measuring the width of the board 16. Centering for the edger 17 17. Edge separator 18. Crosscutter from 0.8 m to 3.0 m 19. Gooseneck 20. Automatic stacker Jabłoński 21. Non-regenerated crosscutter Jabłoński 22. Bruks chipper with control (you need to make a belt or vibrating gutter) Assembly and start-up at the customer's premises is possible. Possibility of sending videos of the working machine before renovation. Possibility of setting the line in a turn or along the length. Optionally, construction of a base for the line. OPPORTUNITY