Milling machine/HERMLE UWF 802 M

HERMLE UWF 802 M

Condition: excellent (used), functionality: fully functional, Universal milling machine Hermle UWF 802M with HS 401 path control GREAT CONDITION!! Technical data: >> Year of manufacture approx. 1995 Machine no. 10212 Nwjdpjv Ed U Dofx Ahvjc >> Rigid angle table >> Speed: 17 to 3550 rpm >> Feed continuously variable in 3 axes from 0 to 1600 mm/min >> Drive power: 6 KW >> Travels X/Y/Z: 500/430/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1800 kg >> Dimensions length 1.8 m, width 1.8 m, height 1.9 m Accessories and equipment: >> HS 401 line control >> Hydraulic tension vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions for the control and programming examples About the machine : A Hermle UWF 802M tool milling machine with HS401 path control is on offer. This universal milling machine is in very good condition. A very easy-to-use path control. Length and radius corrections are possible in the program. No major CNC knowledge is required for this. Of course, the Hermle can also be operated manually without a control. The machine also has hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal is very easy by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Hermle was mechanically and electrically tested by us. Take the opportunity to view and try out the Hermle on site under power.

Condition: excellent (used), Year of construction: 2008, TECHNICAL DATA Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Between T-slots: 65 mm From spindle center to underside of counter-support: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal feed: 4000 mm/min Cross feed: 4000 mm/min Vertical feed: 1500 mm/min Spindle Nedpfx Ahewuurwovswc Taper: ISO40 / DIN2079 Speed range: 55-3000 Head, swiveling: 0-140 ° Quill Movement Quill diameter: 90 mm Quill stroke: Manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF DELIVERY Among others (not an exhaustive list): ABENE milling machine Heidenhain control Tool holder set Coolant pump Leveling feet Mounting block Complete operating documentation Exact scope of delivery according to photo documentation

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 430 mm, feed length Z-axis: 400 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 17 rpm, For sale is a CNC / conventional milling machine of the Hermle brand and type UWF 802 M The machine is in good - very good condition and ready for immediate use Technical data Year of construction: 1994 Control: Heidenhein TNC 124 Clamping: Rigid angle table Speed: 17 to 3550 rpm Feed: Stepless Drive power: 6 KW Travel X 500 mm Travel Y: 430 mm Z travel: 400 mm Tool holder SK40 Dimensions: L*W*H: 1800*1800*1900 mm Weight: 1.8 t On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Nodpfx Ajrvitljhvjwc For further information or contact options, please visit our website

Year of construction: 1991, condition: good (used), Hermle UWF 802 M tool room milling machine with Hermle HS track control. Machine is in good working condition, under current demonstration ready. Nwedpfxedubmko Ahvjc

Condition: refurbished (used), Year of construction: 1988, - Refurbished in 2022 - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gearshift - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct position measurement - Collision protection coupling in the Y and Z axes - Built in 1988 - Including tool holders, drilling/milling tools, and tool carriage Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually movable on spindle block: 150 mm Main drive: - Pole-changing Three-phase brake motor: Manual gearbox with forward/reverse rotation - Power: 3.7 / 4.4 kW - Work spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring package - Tool release: Hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z-axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table slide: Nedpjwhk Ubofx Ahvowc - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (including safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Condition: excellent (used), Year of construction: 1999, Hermle UWF 802 M Hermle UWF 802 M with NC control HS, cycle-controlled, year of manufacture 1998, in excellent original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical specifications: Travel paths X: 500 mm, Y: 430 mm, Z: 400 mm Table size: 800 x 390 mm Spindle taper: ISO 40 Spindle speed: 71 to 3550 rpm, 18 steps Feed rate X and Y: 2 to 1600 mm/min, stepless Feed rate Z: 2 to 1000 mm/min, stepless Rapid traverse X and Y: 1.6 m/min Rapid traverse Z: 1 m/min Spindle drive: 3 kW Power connection: 400 Volt, 50 Hz - Spindle speed adjustable in 18 gear steps - Vertical milling head swivels to the right and left - Hydro-mechanical tool clamping vertical and horizontal - Automatic central lubrication - Separate coolant unit - Control cabinet fixed to the machine - Fixed angle table - Operating manual and wiring diagram Required space (L x W x H): 2000 x 1800 x 1950 mm Weight: approx. 1750 kg Accessories and equipment: Operating manual, electrical diagrams Machine feet About the machine: We offer a Hermle UWF 802 M milling machine with NC control HS, cycle-controlled, year of manufacture 1998, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take this opportunity to view the machine under power on-site and see its condition for yourself. Nwedpfx Ahowyn Rqovsc

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Hermle UWF 802M with HS 401 Contour Control – Excellent Condition!! Technical Data: - Year of manufacture: approx. 1994, Machine No. 10525 - Fixed angle table - Spindle speed: 17 to 3550 rpm - Infinitely variable feed in 3 axes from 0 to 1600 mm/min - Drive output: 6 kW - Travel X/Y/Z: 500/430/400 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight: approx. 1,800 kg - Dimensions (LxWxH): 1.8 m x 1.8 m x 1.9 m Accessories and Equipment: - HS 401 contour control Nsdpfx Ahew Sv Iajvewc - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control manual, and programming examples About the Machine: For sale is a Hermle UWF 802M tool milling machine with HS401 contour control. This universal milling machine is in excellent condition. The contour control is very easy to operate, allowing for length and radius compensation within the program. No advanced CNC knowledge is required. Of course, the Hermle can also be operated manually without the control system. In addition, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very simple by folding away the vertical head. The guideways are regularly lubricated by the central lubrication system. The Hermle has been mechanically and electrically inspected by us. Take the opportunity to view and test the Hermle under power at our premises.

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Model: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control system: HEIDENHAIN TNC 426 Travel X/Y/Z: 600 x 450 x 500 mm Swivel table: 900 x 458 mm Renishaw 3D probe Nodpfxsv Rpr Ss Ahvjwc Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm

Year of construction: 2006, condition: ready for operation (used), A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible Nwodpfxjwftcvj Ahvjc

Condition: reconditioned (used), Year of construction: 2006, CNC Lathe GILDEMEISTER CTX 420 linear Equipped with Siemens 840 D powerline control Year of manufacture: 2006 Max. turning diameter: 324 mm Max. turning length: 600 mm Max. swing diameter: 680 mm Spindle bore: 79 mm Nsdpfxjxzt Dcj Ahvswc Max. spindle speed: 4,500 rpm Including the following accessories: Sliding guard with interior lighting 12-position turret with 12 driven stations Y-axis, C-axis Tool measuring device Parts catcher 3-jaw hydraulic chuck 210 mm with foot switch Hainbuch hydraulic collet chuck IRCO Breuning RBK 10012 bar feeder Signal lamp Tailstock with quill Chip conveyor Oil mist extraction Coolant system with high-pressure coolant (IKZ) and belt filter unit Operating manuals