Edgebander with corner rounders

HEBROCK F4

Condition: excellent (used), Year of construction: 2015, Edge banding machine Hebrock F 4 with jointing, corner copying, and two scraper blades. Very well-maintained machine from a small workshop, in excellent condition. Color touch-screen interface with PLC control for easy machine operation, allowing storage of up to 10 user programs. Edge thickness for roll material approx. 0.4 – 2 mm Workpiece height approx. 10 – 40 mm Feed rate approx. 7 m/min Soundproof enclosure Extendable workpiece support Extraction connection: 1 x 140 mm Units/Features: - Manual pressure beam adjustment with SIKO counter - Manual infeed fence adjustment with SIKO counter - Manual edge thickness adjustment with SIKO counter - Jointing with diamond cutters, blades re-sharpened - Gluing section with automatic edge feed for roll material up to 2 mm - Glue pot with quick-change system for rapid color changes - Pressure zone with 3 rollers - End trimming saw - Combination milling unit, R2 with pneumatic adjustment between thin and thick edge - Radius scraper R2, pneumatically retractable - Corner rounding unit R2, pneumatically settable between thin and thick edge The contour milling unit can also be used for shelf processing, i.e., only the straight edge is rounded, not the corners - Glue joint scraper, pneumatically retractable Other features: - Hood locking - CE marking - Operating manual Djdsw Sn I Eopfx Af Iecn A video of the machine in operation can be provided upon request. All indexable inserts of the milling units and scrapers have been replaced or rotated; saws have been sharpened. The machine is therefore immediately ready for use. The diamond jointing cutters have also been sharpened. Paintwork touch-ups have been carried out. The machine has approx. 335 operating hours and has only processed approx. 20,700 linear meters of edging material. The machine is in very good condition; see original photos. Machine dimensions: approx. 4050 x 1100 x 1400 mm (LxWxH) Weight: approx. 800 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See “more offers from this provider.”

Condition: good (used), Year of construction: 2025, • Additional interchangeable glue pot • PLC control (incl. touchscreen) • Hotmelt application onto the workpiece up to 3 mm jointing cutter • Jointing cutter (incl. DIA tool) up to 2 mm cutting depth Dodpfx Asxgfpzsf Ijcn • Maintenance-free glue pot with quick-change function, incl. glue discharge device • HF cross-cut saw station (approx. 12,000 rpm) • HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable cutter heads (combination execution) • Corner rounding unit • Surface scraper (incl. pneumatic lift) • Free position (for cleaning station or radius scraper) • Robust chain feed • Ball bearing mounted double pressure rollers (top pressure) • Inspection window on rear of machine • Extendable workpiece support • Feed rate approx. 10 m/min • Hebrock F4/09 radius scraper (incl. pneumatic lift) • Hebrock pneumatic 3-point adjustment (for radius, chamfer, or flush milling) Available from: immediately Delivery terms: ex works – EXW Berlin Payment terms: Payment before collection Accessories supplied without guarantee. The following applies: "Item sold as seen." The buyer is responsible for inspecting the completeness of the item on site.

Condition: new, Year of construction: 2024, Edge Bander F4 Brand new machine Year: 2024 Edge banding machine with PLC control system (touchscreen included) and glue application system for edge materials up to 3 mm thick: Dodpfx Ajxf H Snof Ijcn - Pre-milling unit (with diamond tools) for up to 2 mm thick panels - Quick-heating glue pot with coated, maintenance-free interior - Pre-equipped for interchangeable glue pots (hot glue change system included) - High-frequency end trimming station (~12,000 rpm) - High-frequency milling station (~12,000 rpm) with independent pneumatic adjustment and reversible panel saw (combined execution) - Robust feed chain - Double-roller top pressure unit (on ball bearings) - Rear window for visibility - Extendable front support arm - Feed speed approx. 10 m/min OPTIONS ON STOCK MODEL: - Quick-change device for corner milling unit (F4/08/4) - Nesting unit (for milling and radius scraper stations) (F4/27) - Pneumatic adjustment on three points (straight, bevel, radial cuts) (F4/30) - Internal LED lighting (F4/32)

Condition: new, Year of construction: 2025, Hebrock F 4 For complete processing of your panels For all those who don't want to do things by halves. With the F 4, we offer you a model with which you can produce fully processed edges on a machine length of just 4 m. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 50 mm Min. workpiece length approx. 160 mm Feed speed approx. 7 m/min. Ready for operation approx. 3.5 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Dsdpfxjhqadce Af Iscn Work table height approx. 900 mm Machine dimensions approx. 4050 x 1300 x 1400 mm (LxWxH) Weight approx. 820 kg Suction nozzle Ø 1 x 140 mm PLC control 10″ touchscreen Top-mounted rapid-heat adhesive container (maintenance-free) Support plate for edging material Automatic central lubrication (cross-cut saw, corner router) Visual display for workpiece sequence Extension arm (can be pulled out to the front) Interchangeable basin pre-equipment incl. adhesive changing device for PUR processing Surface scraper with dual tracing Pneumatic roller capping (scissor cut design, Hebrock system) Double roller top pressure (ball bearing) Transport chain with bolted special chain plates Jointing cutter Milling unit cross-cut saw Corner cutter Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Location: From stock 54634 Bitburg - available at short notice -

Condition: new, Year of construction: 2024, ON STOCK!!! Pre-milling unit End Trim saw Top and Bottom Trimming unit Corner Rounding Unit Surface Scraper Touch Screen Controller Max. edge thickness: 3mm Min./max. workpiece thickness: 8–50mm Min. workpiece length: approx. 160mm Feed speed: 10 m/min. Ready to operate: approx. 3.5min. Power consumption: ∅ approx. 7.4kW Electrical connection: 400V/3Ph/50Hz Table height: approx. 900mm Machine dimensions: approx. 4,050x1,300x1,400mm (LxWxH) Weight: approx. 820kg Exhaust connection: ∅ 1x140mm Edge Banding Machine with PLC Dedpfxoglfwts Af Iecn Premilling (DIA-tools incl.) up to max. 2 mm milling depth Corner rounding unit Radiusmilling R=2 mm Radius edge milling R=2 mm radius profile scraper

Condition: used, Year of construction: 2017, machine/vehicle number: 1271, max. Anleimerstärke : 2 mm min. Werkstückdicke : 10 mm max. Werkstückdicke : 40 mm min. Werkstücklänge : 180 mm Vorschubgeschwindigkeit : 7 m/min Aufheizzeit : 4 min Fügeaggregat : Ja, mit 2 Fräsaggregaten Fügewerkzeug : Dia-Wechselplatten-Fräser Verstellung des Einlauflineals : manuell Kappschere bis : 2 mm Einzelzuführung der Kante : möglich Beleimung : Leimkontaktwalze Ausführung Leimbecken : wechselbar mit Auslaufkanal Pu- Beleimung : möglich Kappsäge : Ja Kombiaggregat Bündig/Fase/Radius : pneumatisch zustellbar Ecken-Abrundaggregat : pneumatisch zustellbar Flachziehklinge : Ja, tastend Aggregatenanzeige : am Display Steuerungsart : SPS Streckensteuerung Bedienung : Touch-Screen Motorleistung : 7,4 kW Fahreinrichtung : Nein Ausziehbare Rollenauflage : Ja Schutzhaube : Ja Dsdpsvniu Uofx Af Iecn Gewicht ca. : 750 kg Absaugdurchmesser : 140 mm Laufmeter ca. : 7900 m

Condition: new, Year of construction: 2024, functionality: fully functional, Hebrock edge banding machine type: F 4 Dodpfovkv Elex Af Iecn Year of manufacture 2024 Se No. F 4371 / Incl. special equipment: - Quick-change preparation for corner milling machine No. F4/08/4 - Additional change motor for corner milling machine No. F4/08/5 - Radius scraper (pneumatic excavation) No. F4/9 - Multi-radius scraper (R2/1) No. F4/09/4 - Spray device for release agent No. F 4/24/1 - Pneumatic 3-point adjustment No. F 4/30 - Joining up to 50 mm workpiece thickness No. F 4/31 Machine can be put into operation on site by Hebrock. (Factory instruction) Costs: €798 + VAT List price of the machine including equipment: €49,110 excluding VAT Machine available immediately

Condition: new, 3 mm Total length 4122 mm Feed speed 10 m/min. with PLC control (incl. touchscreen) and hot-melt adhesive application to the workpiece foredgebanding material up to 3 mmjointing cutter (incl. DIA tool) up to 2 mm cutter depth1),maintenance-free glue tray with change tray pre-equipment incl. adhesive discharge device,HF cross-cut saw station (approx. 12,000 rpm),HF trimming station (approx. 12,000 rpm) with separate pneumatic trimming adjustment andchange plate trimmer (combined version),corner rounding cutter,surface scraper (incl. pneumatic discharge device) with separate pneumatic trimming adjustment andchange plate trimmer (combined version),corner rounding cutter) with separate pneumatic routing adjustment andinterchangeable plate router (combi version),corner rounding router,surface scraper (incl. pneumatic lift-out),free space (for cleaning station or radius scraper),robust chain drive,ball bearing mounted double roller top pressure,viewing window from rear of machine,pull-out workpiece support,feed rate approx. 10 m/. No. F4/00/11- Joining head WhispercutF4/500/10- Combination milling headF4/500/20- Radius milling cutter R=2mmF4/500/2- Radius corner milling cutter R=2mmF4/08/2- Quick-change equipment for corner milling cutterF4/08/4- Radius scraper (incl. F4/09- Radius radius scraper R=2mmF4/09/2- ChassisF4/10- Pneumatic 3-point adjustment(radius, chamfer, flush milling)F4/30 Dsdpjvwd Uusfx Af Iocn