Coil winding machine

HDR 20.1/89

Condition: good (used), Year of construction: 1991, x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Control FIDIA M30 spindle 37 kW turning speeds 4500 U/min column daylight 2300 mm dist. milling spindle - table surface 1250 mm taper ISO SK-50 table dimension - longitudinal 3000 mm table dimension - cross 1500 mm The Ingersoll-Bohle 5-axis portal milling machine is in good condition and can be can be inspected by arrangement with the seller. Accessories: - High-frequency high-speed spindle 3.8 kW with 25,000 rpm. Bjdpfsvwgmgex Afgjwu Description: - infinitely adjustable inclined axis milling head (speed 4500 rpm)

Year of construction: 1990, condition: ready for operation (used), A CNC lathe Gildemeister is available. Swing diameter over bed/face slide: 600mm/360mm, bed dimensions X/Y: 350mm/450mm, carriage length: 620mm, carriage width: 250mm, facing travel: 1100mm, chuck diameter: 315mm, spindle bore: 107mm, spindle diameter: 140mm, spindle power: 30kW, torque: 950Nm, speed: 3150rpm, rapid traverse X/Z: 10m/min/5m/min. Quill diameter: 100mm, quill stroke: 180mm, max. tailstock pressure: 1200daN, turning length: 1000mm. Machine dimensions X/Y/Z: approx. 4350mm/2050mm/2000mm, weight: approx. 6400kg, operating hours: 49811h. Documentation available. An on-site inspection is possible. Bwodjx R Duaspfx Afgsu

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 3,425 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 18,000 rpm, number of axes: 4, This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2004. It features a powerful 5.5 kW electric spindle, air-cooled, with a maximum speed of 18,000 RPM and an ISO30 tool holder. The tool magazine is centrally located, protected, and supports various tools. It has a standard workpiece length up to 4000 mm and an extended range up to 8000 mm. Contact us for more information about this machine. • A (rotation): ±125° Bedpfxsx D I Hks Afgewu • Spindle Type: Electric, air-cooled • Tool magazine: • Located in the middle of the machine base in a protected area • Accommodates various tools: milling cutters, taps, end mills, angle heads • Construction: • Welded steel structure for maximum rigidity • Linear guides with ball screws • Automatic central lubrication of guides and screws • Cooling: Centralized minimum lubrication system (MQL) • Working range: • Standard workpiece length: up to 4000 mm • Extended range (differential cycle): up to 8000 mm

Year of construction: 2012, condition: ready for operation (used), This Bystronic Bysprint Pro 3015 was manufactured in 2012. It features a BYSTRONIC ByLaser 4400 CO2 laser and is equipped with BYSTRONIC ByVision CNC control and a BYSTRONIC Byloader 3015 sheet loader. If you are looking to get high quality cutting capabilities consider the Bystronic Bysprint Pro 3015 machine we have for sale. Contact us for more information. Application Types Bodex Rpd Hjpfx Afgswu Cutting

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 40 t, table length: 1,030 mm, Equipment: CE marking, documentation/manual, safety light barrier, Used Bystronic Xpert 40ton x 1metre cnc pressbrake for sale Make: Bystronic Model: Xpert 40/1030 Tonnage 400 kn / 40ton Back gauge: 6axis back gauge Bending length 1030 mm / 1metre Y-approach speed (up to) 300 mm/s Y-working speed (up to) 25 mm/s Accuracy Y-axis 0.004 mm Oil capacity 100 l Electric supply 7.5 kw Weight 4t Length, approx. [L] 1520 mm Width, approx. [W] 1584 mm Height, approx. [H] 2449 mm Bjdsy D Smwopfx Afgowu Xpert 40/1030 ByVision Bending control with 22 Inch Full HD display and touch technology

Condition: good (used), Year of construction: 2011, functionality: fully functional, pressing force: 100 t, stroke length: 315 mm, overall weight: 8,000 kg, Hydraulic Press Brake Manufacturer: BYSTRONIC Model: Xpert 100/2050 Year of manufacture: 2011 Technical Data Make: BYSTRONIC Model: Xpert 100/2050 Year: 2011 Press Force: 100 t Bending Length: 2000 mm Stroke: max. 315 mm Motor Power: 7.5 kW Dimensions: approx. L 3.10 x W 1.90 (plus support arms) x H 2.85 m Weight: approx. 8 t Equipment: Bwsdpfsy Ef Rxox Afgsu • Controlled axes: Y1, Y2, X, R, Z1, Z2 • PILZ Fast Bend light barrier • Controller: MMC BYBEND • Hydraulic tool clamping (top and bottom) • Hydraulic pressing table!!! • Movable support arms • CNC-controlled crowning • 1 upper tool, gooseneck, H 150mm, 80°, segmented • 1 lower tool V12 All information is supplied without liability. A demonstration in our showroom is possible at any time.

Condition: refurbished (used), Year of construction: 1980, Worktable 500mm x 1200mm Bedpfx Asx N Ih Iofgswu Arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant system Safety device at the drill Completely overhauled in 2026

Condition: used, Year of construction: 2004, Technical details: table length: 920 mm table width: 600 mm ampere: 13,2 A weight of the machine ca.: 6 t dimensions of the machine ca.: 2,46 x 2,24 x 2,33 m X-axis: 600 mm y-axis: 400 mm Z-axis: 260 mm max. table load: 1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg. Bsdpfouzbayex Afgewu *

Condition: ready for operation (used), Year of construction: 2017, pressing force: 41 t, stroke length: 200 mm, overall weight: 4,000 kg, Press brake manufactured in 2017. This Bystronic Xpert 40/1030 features a press force of 400 kN and a bending length of 1030 mm. It includes a ByVision Bending control system and a 6-axis backgauge for enhanced precision. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 40/1030 machine we have for sale. Contact us for further details. • Control: ByVision Bending • Backgauge: 6-axis • Interface: OPC • Oil cooling system • Safety system: Fast Bend G2 • Electrical: 3-phase 400V / 50 Hz • Main motor power: 7.5 kW • Made in Germany • The PLC Runtime is 1812 hours • The Robot Runtime is 140 hours. Additional equipment • Bystronic Mobile Bending Robot (Integrated robotic bending cell) Bwjdpfx Aoy Tw R Tsfgeu • Year of manufacture: 2017 • Electrical: 3-phase 400V / 50 Hz • Power consumption: 3 kW • Pneumatic pressure max: 8 bar • Weight: approx. 1000 kg LIST OF TOOLS Bystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=300 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=275 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=200 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=100 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=50 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=30 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=20 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=15 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=10 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=275 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=200 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=100 mmBystronic P5RFA/30° Left Angle – 750 kN/m – R=1 mm – H=250 mm – L=100 mmBystronic P5RFA/30° Right Angle – 750 kN/m – R=1 mm – H=250 mm – L=100 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=50 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=30 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=20 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=15 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=15 mm Technical Specification Bending Length 1030 mm

Condition: used, Year of construction: 2017, Overview  This 5/10hl 3-device brewhouse was manufactured in 2017 by the Austrian manufacturer Labu. The brewhouse has various automation features such as automatic starting, automatic sparging and automatic spent grains discharge. It is currently available for sale, including additional equipment. Technical data  - Capacity: 5/10hl - Electrical heating: 27kW / 400V (special ceramic heating element) - Equipment: - 3 appliances: brewing kettle, lauter tun, whirlpool - Additional equipment included: - Manual filler (wall-mounted) - Keg filler - 2 fermentation and storage tanks (650L each) - 1 fermentation and storage tank (1200L) - All tanks from L-Inox, equipped with jacket and cone cooling (3 bar operating pressure, tested up to 4.5 bar) - Glycol cooler - Plate heat exchanger Scope of delivery  Bwedpfx Aoyb R Itefgou - 1x 5/10hl 3-device brewhouse (brewing kettle, lauter tun, whirlpool) - 1x manual filler (wall-mounted) - 1x keg filler - 2x fermentation and storage tanks (650L, L-Inox, with jacket and cone cooling) - 1x fermentation and storage tank (1200L, L-Inox, with jacket and cone cooling) - 1x glycol cooler - 1x plate heat exchanger