Bench Lathe

HBM 290 x 750

Condition: new, Year of construction: 2023, Standby power 20 kVA (16 kW) Full load 17.5kVA (14kW) Voltage 230/400V Generator power 16 kW Generator continuous power 14 kW Number of phases 3 ECU adjustment Fuel tank capacity 60 l Liquid cooling Frequency 50Hz Rotation speed 1500 rpm. Engine type in-line, 4-cylinder, naturally aspirated Cylinder diameter and length 98 x 105 mm Engine capacity 3.2 liters Capacity oil approx. 3 l (between the min./max. value on the dipstick) Capacity coolant approx. 5 l diesel fuel Compression ratio 17.2:1 DATAKOM D300 control panel Insulation class (alternator) H Number of windings (alternator) 12 IP degree of protection (alternator) IP23 Shunt excitation type Voltage (alternator) +/- 1% Overall dimensions (length x width x height) 2000 x 900 x 1070 mm EURO III emission standard Gtsdpfx Afoi Nthqekjt Weight 730 kg

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, total height: 2,100 mm, total width: 2,100 mm, total length: 2,300 mm, table width: 450 mm, table length: 750 mm, rotational speed (max.): 4,500 rpm, rotational speed (min.): 1 rpm, overall weight: 1,900 kg, workpiece weight (max.): 500 kg, Travel X/Y/Z 400/350/300 mm, spindle spped 1 - 4500 rpm, motor 4,5 KW, spindle ISO 40, control Heidenhain TNC 320, table size 750x450 mm, hydraulic tool clamping, coolant device, spash guard, tool holders, manual Gtsdpfx Aswb Erzsfkst

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Gedpfx Aevr Eh Eofkett Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2025, TYTAN 750 PRO 400V universal lathe. The lathe is designed for machining external and internal cylindrical surfaces, thread cutting, drilling, countersinking and reaming holes. It is usually used in small industrial plants, workshops, garages, etc. Machine description The TYTAN 750 VARIO PRO lathe, thanks to the smooth spindle speed adjustment, is an ergonomic machine that responds to the user's needs. Reducing the time it takes to set up the machine while machining parts of a wide range of sizes translates into efficiency and ease of use. Main advantages: + A modern motor with smooth spindle speed regulation ensures comfort of use and shortens the calibration time. + The LCD screen with the spindle speed display allows you to control and quickly modify the spindle speed while setting the cutting and tapping modes. Gsdpfx Ajvvlxljfkjtt + Two spindle speed ranges: reduced (50-1250) for machining hard steels and increased (100-2500) for high-speed precision turning. + Threads cut: metric - 18 degrees (0.2-3.5), inch - 21 degrees (8-56) left and right threads can be cut. + The automatic longitudinal feed has 6 speed ranges (0.07 to 0.40) mm / rev. - thanks to it, the machining time is much shorter, which does not deteriorate the quality of work when turning long parts. + The TYTAN 750 vario PRO lathe, thanks to the smooth spindle speed adjustment, is an ergonomic machine responding to the user's needs. Reducing the time it takes to set up the machine while machining parts of a wide range of sizes translates into efficiency and ease of use. + The machine is fully compliant with the requirements of EU directives (CE) as well as Polish regulations and DIN standards. Technical parameters dimensions Turning diameter over bed 250 mm Turning diameter over cross slide 150 mm Claw spacing 750 mm Bed width 135 mm Spindle passage 27 mm Spindle taper MK4 Spindle speed adjustment smooth Spindle speed 50-1250 | 100-2500 rpm Number and range of metric threads (18) 0.2-3.5mm / rev Number and range of inch threads (21) 8-56 zw./cal Number and range of feeds 0.07-0.4mm / rev Top slide travel range 70 mm Maximum cross slide travel 135 mm Maximum travel of the longitudinal slide 650 mm Maximum tool size 16 x 16 mm Feed the tailstock sleeve 60 mm Tailstock taper MK2 Handle size 125 mm Spindle motor 1.1 kW L / W / H 1,350 x 560 x 1,250 mm Weight 170 kg

Condition: ready for operation (used), Year of construction: 2003, Weiler E50 x 1000 precision lathe (2003) Manufacturer: Weiler Type: E50 x 1000 Year of manufacture: 2003 Condition: good, used, under power Operating hours: 43.000h Technical data see pictures. Included in delivery: - Original documentation - Rota S Plus 250-62 Godpfjxd Tikex Afkott - Bezel - Parat 4 compartment tool turret

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22012101118, spindle bore: 21 mm, center height: 100 mm, turning diameter: 200 mm, type of input current: AC, turning diameter over bed slide: 110 mm, input voltage: 230 V, spindle speed (max.): 2,500 rpm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 150 rpm, spindle speed (min.): 150 rpm, tailstock quill mount: MK 2, spindle mount: MK 3, total width: 425 mm, total length: 830 mm, total height: 360 mm, tailstock quill stroke: 65 mm, Equipment: rotational speed infinitely variable, Working Ranges Center Height: 100mm Center Distance: 300mm Swing Diameter over Cross Slide: 110mm Bed Width: 100mm Speed Range Speed Control: electronically adjustable Number of Speed Ranges: 2 Speed Range: 150 – 2500 rpm Electrical Data Drive Motor Power: 0.6kW Connection Voltage: 230V Mains Frequency: 50Hz Standards and Approvals Standard: DIN EN 55011 EMC Class: C1 Spindle Spindle Bore: 21mm Tool Holder Maximum Mounting Height: 12mm Chuck Passage Diameter: 20mm Spindle Taper: MT 3 Tailstock Tailstock Taper: MT 2 Tailstock Quill Travel: 65mm Leadscrews Metric Pitch: 0.25 – 3mm/rev Number of Metric Pitches: 14 Inch Pitch: 44 – 8 TPI Number of Inch Pitches: 12 Travel Cross Slide Travel: 55mm Gtedpfx Afew Imhvskjt Compound Slide Travel: 75mm Carriage Travel: 300mm Feed Longitudinal Feed Range: 0.1 – 0.2mm/rev Number of Longitudinal Feeds: 2

Condition: new, bore capacity in steel (diameter) 16 mm throat 180 mm bore stroke 85 mm spindle taper MK 2 Gjdpfx Ajupxcyofkjtt spindle diameter 47 mm spindle turning speed range 320 - 3300 U/min 230 mm 100 mm table surface area 420 x 155 mm connected load frequency 230 V 900 x 600 x 300 cm total power requirement 0,75 kW weight of the machine ca. 8o Kg dimensions 0,7 x 0,7 x 0,8 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: new, Fervi T052/400VDA Milling drill. Ready for delivery except sold. Gtjdpsh Dbbgsfx Afkst With automatic descent, choice of direction of rotation and belt drive rack spindle 1 ÷ 13 b16 drilling spindle attachment cm 3 cutter attachment cm 3 ø 27 mm refrigeration system Drilling capacity with pre-hole Ø 32 mm Milling capacity with insert cutter Ø 76 mm Milling capacity Ø 20 mm Head stroke 405 mm Morse taper CM 3 Column spindle distance 205 mm Max. distance between spindle and table 700 mm Spindle stroke 130 mm Manual vertical feed division 0,05 mm Sleeve Ø 75 mm

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 7/61, Manufacturing origin Swiss Voltage 380/50/3 Netweight abt. 760 kg Dimensions abt. 1250x1000x1700 mm TECHNICAL DATA WORK CAPACITY Travel X and Y 200x200 mm Vertical slide travel 250 mm Travel of drilling spindle 70 mm Max free passage between table and spindle nose 330 mm Free passage between column and centre of spindle 260 mm Max drilling capacity (steel) 10 mm Max reaming capacity 50 mm TABLE Usable surface 400x300 mm Admitted load 100 kg Travels X and Y through motors Number of T-slots 6 (longitudinal) DRILLING HEAD Spindel morse taper 0 Speed of spindle 150-3000 rpm Feed of drilling spindle 0,015 mm/t PRECISION Direct reading on divided drums 0,01 mm Direct reading on verniers 0,001 mm Guaranteed precision on displacement of slide-way 0,002 mm MEASURE Measuring system direct, optical Elements of measure graduated rule, div.1mm Read-out projection screens Shifting of zero-point yes Direct read-out 0,001 mm Guaranteed positioning precision 0,002 mm Installed power 1,2 kW errors and omissions excepted data given without obligation Inventory Nr.2160006, machine equipped with : Gedpfx Afsd Amgkskjtt 1 turning table Ø 220 with optical measure 1 centering microscope with 3-points suspension, zoom 40x, lightening 1 centering device with dial comparator cap. 3 mm. MT0 1 centering point MT0 1 tracing tool with spring-mounted point MT0 1 center punch MT0 1 chuck for centering drills MT0 1 self clamping drill-chuck 0-5 mm., MT0 1 boring head type 0, cap. 0.5-30 mm., MT0 1 levelling foot with 2 round levelling supports

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm Gedpfxjwgi Tms Afkett