CNC coordinate grinder - HAUSER S40-400

HAUSER S40-400

Condition: used, Year of construction: 1980, functionality: fully functional, x-travel 650 mm y-travel 450 mm Workpiece height 585 mm Control system ADCOS CNC 400 Total power requirement 15 kW Machine weight approx. 5,000 kg HAUSER CNC Double-Column Coordinate Grinding Machine Model S 40 – CNC 311 / ADCOS 400 CNC --- Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Maximum table longitudinal travel (X) 650 mm Grinding head cross-slide travel (Y) 450 mm Vertical adjustment of crossbeam (W) 500 mm Grinding spindle stroke (Z) 140 mm Stroke speed of grinding head (4Hz) 0.5–12 m/min Vertical clearance between table/grinding spindle 0–585 mm Clearance between columns 750 mm Maximum taper grinding 16° Grinding diameter of bore approx. 230/360 mm 18 spindle speeds depending on spindle motor, steplessly adjustable 4,500–80,000 rpm Fine feeds in X and Y axes and W axis: 0.5–1,500/3,000/800 mm/min Planetary rotation speed (C) 5–250 rpm Total drive approx. 15 kW – 400 V – 50 Hz Machine weight approx. 5,000 kg Accessories / Special Equipment: • CNC path control replaced in 2007 with an ADCOS CNC control system Type CNC 400, featuring a large screen and direct programming at the control unit, with electronic handwheel for fine axis adjustment. Axes: X=table longitudinal, Y=grinding head cross, Z=quill vertical/stroke, C=rotary axis spindle/quill, U=automatic feed, W=crossbeam vertical adjustment • Z-axis with rapid traverse for shorter processing times, plunge grinding, face grinding, selectable reverse points (approach + teach-in), and infinitely variable stroke speed, functioning as a 3rd positioning axis • U-axis as manual and controlled radial feed axis at the grinding head, with electronic display of feed size Gbodpfx Afow Udztjisu • 1 grinding motor fitted with spindle speed approx. 30,000 rpm • Built-in acoustic grinding contact indicator KSV 5 • Separate coolant system with belt filter, separate electrical and control cabinet, separate hydraulics, centralized lubrication, dust extraction, and much more.

Condition: used, Year of construction: 1981, x-travel 650 mm y-travel 450 mm workpiece height 585 mm Control ADCOS CNC 400 Godpfjt Hw S Usx Afiebu total power requirement 15 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 311 / ADCOS 400 CNC Year 1981 / CNC modernized in 2008 # 0126 _____ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Distance between columns 750 mm Conical grinding max. 16 ° Grinding-Ø bore approx. 230/360 mm 18 spindle speeds depending on spindle motor infinitely variable 4.500-80.000 rpm Fine feeds in X and Y-axis and W-axis 0,5-1.500/3.000/800 mm/min. Planetary speed (C) 5-250 rpm U-axis, radial feed 6 mm Total electrical load approx. 15 kW - 400 V – 50 cycles Weight approx. 4.500 kg Accessories/ Special Features: • CNC Pathcontrol replaced and modernized into a ADCOS Control Model CNC 400, (German Manufacturer) including large monitor and relevant software, electronic handwheel, for following axis: X=Table length, Y= spindlehead carriage cross, Z= Quill vertical/stroke, C=Quill-Rotation,U=Circular Infeed, w=Vertical adjustment of cross rail. • Z-axis as rapid stroke for shorter processing times, plunge-cut grinding, face grinding, Pre-selection of reversing stops (start movement + teach-in) and of stroke speed (infinitely variable), • U-axis as manual and controlled feed-axis radial, mounted on grinding head, with electr.display of feeding size 1 Grinding motor mounted on spindle, maybe up to a spindle speed of 30.000 rpm, • Mounted accustic grinding contact-display device KSV 5 • Separate standing coolant facility, switching- and control cabinet, separate hydraulic system, central lubrication system, dust suction, etc Condition : very good / can be inspected under power Delivery : ex stock – as inspected Payment : net – after completion of contract

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, total height: 2,750 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table width: 630 mm, table length: 770 mm, distance table to spindle center: 585 mm, table load: 500 kg, overall weight: 4,500 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, Equipment: documentation/manual, CNC JIG GRINDING MACHINE HAUSER S40-400 NC control completely retroffited in 2020. TECHNICAL CHARACTERISTICS : Stroke X axis: 650 [mm] Max. Stroke speed X axis: 4000 [mm/min] Working feed X axis: 0 - 1800 [mm/min] Stroke Y axis: 450 [mm] Working feed Y axis: 0 - 1800 [mm/min] Stroke Z axis: 130 [mm] Min. Stroke speed Z axis: 0.5 [mm/min] Max. Stroke speed Z axis: 12000 [mm/min] Stroke frequency Z axis: max. 4 [Hz] Stroke W axis: 500 [mm] Planetary speed C axis: 5 - 250 [rpm] Max. Stroke speed W axis: 800 [mm/min] Stroke U axis (radial feed): 5.5 [mm] Distance between columns: 750 [mm] Table length: 770 [mm] Table width: 630 [mm] Clearance between grinding motor and table: 585 [mm] Max. load on table: 500 [Kg] Supply voltage: 400 [V] Weight: 4550 [Kg] INCLUDED EQUIPMENT: 1 tool detection device 1 DONALDSON oil mist extraction unit DMC-D1, 2 45 S grinding motors, speed 9000 - 4500 [rpm] - reference: 144017, 1 80 S grinding motor, speed 40000 - 80000 [rpm] - reference: 144021, 1 T10 grinding turbine, speed: 100,000 [rpm] - reference: 157420, 1 turbine holder with filter - reference: 166497, Godpfjwu Rirsx Afiebu 1 profile dresser on table, 200 [°] pivotable - reference: 194590 1 coolant tank + paper tape filtration device 6 collets, 1 operator's manual in French. RETROFIT WORK CARRIED OUT IN 2020: ELECTRICAL SECTION: Supply of an electrical cabinet equipped with a FANUC 0iF numerical control, Supply of a control panel for FANUC with 15" screen and keyboard, Axes controlled by the numerical control: X, Y, Z, C, and U, Wiring of the electrical cabinet, Machine wiring with replacement of all sensors and cables, Connection and powering of the electrical cabinet, Adjustment of axis servos, Installation and programming of cycles and conversational pages for HAUSER. MECHANICAL SECTION: Supply of axis motor adapters, Supply of an electrical rotary joint, Scraping of the table surface, Reassembly of the entire head and adaptation of the Fanuc motors on the C and U axes, Installation of all measuring systems (including 2 HEIDENHAIN linear glass scales on the X and Y axes). ADDITIONAL CYCLE DEVELOPMENT: Development of a Blind Bore cycle and associated conversational pages, Modification of the conversational programming for the U axis: changing from piece diameter programming to radius programming in all existing grinding cycles, Modification of wheel data to be entered by radius instead of diameter, Modification of all wheel dressing cycles, straight, shapes, and ISO, Modification of all dressing compensations in all grinding cycles. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,550 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, clearance between the columns: 750 mm, Equipment: documentation/manual, CNC Jig grinder HAUSER S 40 400 Gbjdpfowu Dwpox Afisu TECHNICAL CHARACTERISTICS : Stroke X axis : 650 [mm] Max. Stroke speed X axis : 4000 [mm/min] Working feed X axis : 0 - 1800 [mm/min] Stroke Y axis : 450 [mm] Working feed Y axis : 0 - 1800 [mm/min] Stroke Z axis : 130 [mm] Min. Stroke speed Z axis : 0.5 [mm/min] Max. Stroke speed Z axis : 12000 [mm/min] Stroke frequency Z axis : max. 4 [Hz] Stroke W axis : 500 [mm] Planetary speed C axis : 5 - 250 [rpm] Max. Stroke speed W axis : 800 [mm/min] Stroke U axis (radial feed) : 5.5 [mm] Distance between columns : 750 [mm] Table length : 770 [mm] Table width : 630 [mm] Clearance between grinding motor and table : 585 [mm] Max. load on table : 500 [Kg] Supply voltage : 400 [V] Weight : 4550 [Kg] EQUIPMENT INCLUDED: x1 HI-CUT pack including: -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -automatic paper tape filtration unit x1 grinding motor 22 S, speed 4500 - 22500 [rpm], for EX23 collets - part number: 181561 x1 45 S grinding motor, speed 9000 - 4500 [rpm], for EX19 collets - reference: 144017 x1 80 S grinding motor, speed 40000 - 80000 [rpm], for F6 collets - reference: 144021 x1 grinding motor for slot grinding (motor + belt are included) - reference: 144022 x3 grinding tools for slot grinder x1 set of belts for slot grinding motor x1 intermediate plate for alignment of grinding motors - reference: 192940 x1 infinitely adjustable cantilever plate with mounted grinding motor for grinding up to Ø360 [mm] - reference: 144023 x1 adjustable plate, for tilting grinding motors and turbines (up to 16°) - reference: 126148 x1 set of 2 HAUSER 90° angle brackets - reference: 155361 x1 centring microscope - reference: 146318 x1 tool contact detection device - reference: 162334 x20 grinding wheel holders x1 cable for grinding motor Various tools Complete documentation Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.