Vertical machining center

Hartford HEP - 3150

Condition: used, Year of construction: 1998, machine/vehicle number: 100057, 1998 AMADA VIPROS 2510 KING The punching machine is in good condition, always serviced on time by Amada service. All documentation is included. This machine can be operated with a punching force of 196 kN. Made in Japan. The punching machine is still under power and can be tested at any time in Vilnius, Lithuania. Specification: Model: AMADA VIPROS 2510K Serial no: 100057 Year: 1998 Made in: Japan Punching force: 20 tons Stations: 31 Kedpom Ncaysfx Alfslr Tools: included (RO 6; RO 6,5; RO 3; RE 30x5; RE 25x5; RE 80x5; RO 5; RO 3,5; RE 10x3; RE 10x5; RE 50x5; RE 8x12) Maximum sheet thickness: 3 mm X-axis movement: 2500 mm Y axis travel: 1270 mm Weight: 11 000 kg Location: Vilnius, Lithuania Testable: Yes If you have any questions, please do not hesitate to contact us.

Condition: like new (used), Year of construction: 2018, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table width: 1,100 mm, table length: 3,200 mm, number of slots in tool magazine: 60, DMG MORI DMF 260/11 LINEAR 5-AXIS MACHINING CENTER (Champion) TECHNICAL SPECIFICATIONS (MACHINE IN GOOD CONDITION) Brand: DMG MORI Model: DMF 260/11 Linear 5 Axis (Champion) CNC Control: Heidenhain iTNC 530 Table Dimensions: 3200 x 1100 mm X / Y / Z Travel: 2600 x 1100 x 900 mm Table Load Capacity: 4000 kg Rotary Table Capacity: 1200 kg Machine Weight: 27,750 kg (27.5 t) Taper: DIN 2080 A-50 (ISO 50) Tool Magazine Capacity: 60 positions Spindle Speed: 10,000 rpm Blum Tool Measurement Additional equipment and maintenance performed - Internal and external air and coolant supply, through the spindle via M function (40/80 bar) - Upper external air cooling (chip evacuation for higher chip volume via M function) - Spindle vibration control module - Preventive maintenance up to date, oil changes, filters, coolant, performed as per manufacturer’s specifications or based on usage Kedpfx Aoytrzxjlfslr - Y-axis spindle replaced at 9,256 hours - Belleville washers replaced at 13,903 hours - Mechanical tool setter with option to install Blum laser (Includes laser) - DMG probe - 3D QuickSET - Coolant gun - X-axis linear drive - Basic machine dimensions: Length mm: 8,600 Width mm: 5,800 Height mm: 3,200 - Chip conveyor

Year of construction: 1993, condition: ready for operation (used), machine/vehicle number: Seriennummer: 9302394, CNC-Control HATASTAR 2000 Kodpfxjd Egc As Alfslr The press capacity is 500 t or 5000 kN In addition to the machine tools are available Switch Cabinet left X1- + R-/ X2- + R-Axe on round guide Y1- + Y2-Axe hydraulic Upper tool clamping pneumatic sheet metal trace-device Second tow-hands Operation universal matrice 100x100x5'100 mm knife 280 x 5'100 mm Matrices-central plate, b = 111 mm

Condition: good (used), Year of construction: 2014, operating hours: 8,035 h, functionality: fully functional, machine/vehicle number: MH0017-000100, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: fanuc, controller model: 31i, operating hours of spindle: 6,000 h, New Doosan horizontal machining center type NHP 8000 with Fanuc control unit type 31i Included equipment and options: Pallet centering system 800*800 Coolant supply with hand gun High-pressure coolant 70 bar, 7.5 kW with cyclonic filtration Automatic tool changer Tool load management Chip conveyor Renishaw RMP60 workpiece probe TS27R tool probe Kodewu Rgqjpfx Alfolr

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 119/020.0895, Manufacturing origin CH Voltage 400 V Netweight 4500 kg Custom position 8460.2320 Dimensions 2700x2350x2100 mm TECHNICAL DATA Control Fanuc 16i-T Center height 175 mm Distance between centers 1000 mm LINEAR AXES Grinding length 500 mm Strokes X : 267 mm Z : 650 mm WHEEL HEADSTOCK Continuous orientation +/- 8.5°. External grinding wheel size 500x80x203 mm Power 7.5 kW Speed 44 m/sec. WORKPIECE HEADSTOCK Taper type MT5 C-axis +/- 5 Power 1 kW Speed 30-1000 min-1 TAILSTOCK Taper type MT3 Sleeve stroke 35 mm Sleeve diameter Ø 50 mm Max. workpiece weight 130 kg POWER SUPPLY Voltage 400V 50 Hz errors and omissions excepted-data given without obligation Fully overhauled: Mechanics, geometry, hydraulics and electrical parts checked and/or replaced. Grinding headstock Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of motor, replacement of bearings, replacement of belts, disassembly of spindle, replacement of seals and O-Rings + adjustment. New paintwork. Headstock Dismantle, clean parts, replace worn and faulty parts, overhaul motor, replace belts. New spindle bearings. New paintwork. Tailstock Dismantled, checked and overhauled. Hydraulics Dismantle, check motor, replace hoses, defective and worn parts. Check hydraulic block X-axis Dismantle, replace worn parts such as O-Rings, seals, rings etc., overhaul hydraulic piston, grind tables. Z axis Dismantle, grind tables, replace worn and defective parts, overhaul hydraulic piston, new paintwork. Electrical cabinet Complete check, change various relays. Klsdpjlbgfcofx Alfsr Painting Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 26,426 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, punching force: 20 t, The punching machine is in good condition and has always been serviced on time by certified Amada service representatives. All documentation is included. The drum encoder was recently replaced. The machine is sold complete with software and tools. The punching machine is connected and can be tested on site. Specification: Year: 2004.07 Made in: France Operating hours: 26,426 Power-on hours: 65,006 Control unit: AMADA AMNC-F Kledpfew E Emaox Alfsr Punching force: 20 tons Stations: 45 Tools: sold with tooling Software: Linea 5 / Combi 5 (Only works with Windows XP) Sheet length: 2,500 mm Sheet width: 1,270 mm Sheet thickness: 3.2 mm Sheet repositioning: 5,000 mm Workpiece weight: 150 kg Dimensions: L 6080 x W 5120 x H 2318 mm Weight: 16,500 kg Location: Lithuania Test possible: Yes If you have further questions, we will be happy to answer them.

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,950 mm, total length: 6,000 mm, total width: 3,800 mm, table width: 900 mm, table length: 3,100 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, overall weight: 25,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, X-axis travel: 2500 mm Y-axis travel: 920 mm Z-axis travel: 820 mm Table size: 3100 x 900 mm Spindle nose: SK/ISO40 Spindle speeds: 20 - 18.000 rpm Toolchanger: 30 pockets Controller: Heidenhain iTNC 530 Featured with: - Chipconveyor - Cooling through spindle 40 Bar - ISO40 tools - Machine manuals Kodpjyac Tlefx Alfjlr Country of origin: Germany Motor power: 35 KW Machine LxWxH: 6000 x 3800 x 2950 mm Machine weight: 25.000 kg

Condition: good (used), Year of construction: 2009, Traverses XYZ 850 x 700 x 750 mm, Pallet size 500 x 500mm, Kodpfx Aljwq Iwxjfjlr pallet load 500 kgs, 60 ATC, BT40 spindle taper, Fanuc 31i- control. Spindle power 22Kw, B axis 0.001 Degrees, 14000 rpm spindle, swarf conveyor, Through Spindle Coolant.

Condition: excellent (used), Year of construction: 2006, CNC Machining Center Hedelius T8 – 3200 Magnum Control: Heidenhain iTNC 530 Year of manufacture: 2006 Internal machine number: 1 Travel ranges: X-axis F/B: 3,220 / 2,600 mm Y-axis: 800 mm + 65 mm Z-axis F/B: 850 / 1,000 mm Pendulum operation F/B: 2 x 1,300 mm Clamping surface: 3,800 x 800 mm Taper: SK 40 Tool magazine: 98 stations Spindle speed: 50 - 12,000 rpm Enlarged machine table Equipment: - Internal coolant supply (IKZ) 20 bar - Band filter coolant system 780 l - 3D wireless probing system Renishaw RMP 60 - Chip conveyor - Rinse gun - Electrostatic exhaust air filter - Electronic handwheel HR 410/3+ Klsdsyk Avzspfx Alfjr - Partition - 2x LTA extraction units - Prepared for 5th axis

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,525 mm, overall weight: 21,000 kg, table load: 160 kg, number of axes: 2, This AMADA EMZ 3610 NT was manufactured in 2008. It features a press force of 300 kN, can handle material up to 4.5 mm thick, and supports a maximum table load of 160 kg. The machine includes 45 turret stations with auto-index and achieves a stroke rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. • Press force: 300 kN • Travel distance with repositioning (X/Y): 5000 mm / 1525 mm • Max. material thickness: 4.5 mm Klodpfjx Enlxox Alfor • Travel speed (X/Y): 100 m/min / 80 m/min • Axis speed: 128 m/min • Positioning accuracy: ±0.1 mm • Turret stations: 45 • Auto-index stations: 2x B / 2x C • Overhauled two years ago, and serviced by Amada every year • Turret speed: 30 rpm • Stroke rate: 1000 strokes/min