CNC lathe

HANKOOK Korea PROTEC-7NA - Year2013

Condition: used, Year of construction: 2003, turning diameter max. 420 mm turning length 1090 mm control FANUC Serie 18i-TB turning spindle Durchlass 108 mm 250 / 315 turning speed range 0-3750 U/min Feed speed 18/24 m/min. workpiece 12 quill stroke 100 mm diameter of quill 110 mm taper MK 4 number of driven tools 12 mm turning speeds 3000 U/min 22 nm coolant tank 140 l total power requirement 22/18,5 kW weight of the machine ca. 6500 KG Ffsdpfx Aasucgylj Esw

Condition: used, Year of construction: 2003, turning diameter 190 mm turning length 620 mm control Fanuc Series 18i-TB total power requirement 15 kW weight of the machine ca. 13,5 t Fsdpfx Aasxiy Aue Eefw dimensions of the machine ca. 5350X3350x2395 m

Condition: used, Year of construction: 1999, turning diameter max. 900 mm turning length max. 2.000 mm control MSD 501 II turning diameter over bed 994 mm turning diameter over cross slideways 733 mm standard turning dia. 374 mm centre distance 2.300 mm turning speed range - main spindle 3 - 1.500 min/-1 power capacity - main spindel 43 / 37 kW Number of speed ranges 3 spindle bore 205 mm chucking diameter 500 + 500 mm number of toolpositions 12 pos. Shank height for square tool 32 mm Drill shank diameter max. 65 mm x-axis 485 (450 + 35) mm z-axis 2.150 mm tailstock 2.100 mm diameter of quill 150 mm quill stroke 150 mm rapid traverse X: 20 / Z: 20 m/min Tipp feed 0 - 1.260 mm/min total power requirement 65 kVA weight of the machine ca. 18,5 t dimensions of the machine ca. 8,0 x 4,0 x 3,2 m CNC - Oil pipe Lathe MORI SEIKI - SL 600 B / 2000 CNC lathe with front and rear chucks and high drive power for pipe machining Features: - Pneumatic front chuck 500 mm with 205 mm bore - Pneumatic rear chuck 500 mm with 205 mm bore Control Options: Ffedpfxoylzv Ns Aa Eow - Variable thread pitch - Program memory expansion - Tool correction expansion

Condition: good (used), Lot of toolholders and other equipement. Ffjdpfx Aswfg Dtsa Esw

Condition: used, Year of construction: 1999, max. bar material dia. 42 mm max. turning diameter 180 mm Ffsdpfx Asxlugmoa Ejw turning length 350 mm control FANUC 18i Main-/Counter -spindle turning speeds 6.000 U/min number of tapers in turret head 2 x 12 tool taper VDI 25 travel -x axis 170 mm travel -z axis 350 mm CNC Turning- and Milling Center | SCHAUBLIN - 42S TM-6 with main and sub-spindle, 2x turrets aligned for driven tools and equipped with a bar feeder. The machine has 7.856h running hours. The machine is in good condition and can be inspected under power. For further technical details, please refer to the attached offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 42STM-6 | 42STM | 42STM6 | 42 S TM-6

Condition: new, O.D. Ø 305 mm I.D. Ø 90 mm Ffjdpfefhdnhjx Aa Eew

Condition: used, Year of construction: 1995, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mori Seiki Lathe 3 Axes X, Z, C Model SL-45 MC Year 1995 Fodpfxjykkzfo Aa Eofw Fanuc CNC Without jaw chuck With tooling With chip conveyor With documentation Complete

Condition: good (used), Year of construction: 2007, turning length: 600 mm, spindle bore: 33 mm, Distance between main spil and left turret 404 mm Distance between spil and sub spil nose minimum 260 mm Distance between spil and sub spil nose maximum 760 mm Max. turning Ø: 180mm X-Axis: 160mm Z-Axis: 210/600mm Spindle bore: 33mm Speedrange: 4000Rpm Spindle power: 7.5kW Subspindle speeds:4000Rpm Subspindle bore: 7.5mm Length: 3100mm Width: 1700mm Height: 1800mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Fedpfextb Nwex Aa Ejfw

Condition: ready for operation (used), Year of construction: 2004, operating hours: 9,900 h, MURATEC MD 200G Year of manufacture: 12 / 2004 Control unit: Fanuc 18 it Integrated gantry loading system with travels of 2100 mm + 2250 mm Z-axis gantry stroke increased by 100 mm (“Z” axis shift) Gantry with increased payload capacity (12+12 kg) Muratec WFL 20-280 workpiece feeding system No. 2 Autoblock BH 250 self-centering chucks Fedpfx Aew E D Tlja Eofw No. 2 servo-controlled turrets with 10 positions for driven tools Static toolholder kit No. 2 radial driven toolholders No. 2 axial driven toolholders “C” axes for both spindles, continuously adjustable to 360,000 positions Coolant + air outlet above left and right spindles “PEL” device on right spindle Belt-type chip conveyor with rear discharge Rigid tapping software TOOL MONITOR software TOOL LIFE MANAGEMENT software CE mark

Condition: excellent (used), Year of construction: 2008, 3-axis CNC Lathe HARDINGE GS 250M CNC Fanuc Oi-TC Spindle hours: 6000h Specifications: Max swing over bed: 595 mm Max turning diameter: 356 mm Turning length: 558.8 mm X-axis travel: 271 mm Z-axis travel: 600 mm Bar capacity: 78 mm Spindle bore: 89 mm Spindle speed: 3500 rpm Spindle power: 18.5 kW Spindle nose: A2-8’’ Options: 1 turret with 12 driven positions in VDI 40 C-axis with 360,000 positions 2 driven tools Fully programmable tailstock Automatic tool measurement probe Fodpfx Asykbarea Esfw Parts catcher 2 fixed tool holders 2 driven tool holders 1 3-jaw chuck 254 mm Tonfou