Used Haffner Typ Kf 20 for sale (30,121)

Condition: used, used, good condition, hardly runmanufactured by Haffnertype KF 20stand machinechain set 40 x 150workpiece restlubricant unit1 x mechanical workpiece clampingrequired space ca. l x w x h mm600 x 800 x 2000total connected power 1,7 kWlocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Bodpfx Aovwgayjdrodd

Condition: used, Used machine Equipment and technical data: Lift left/right: 150 mm, Lift up/down: 150 mm Motor: 1.5 kW Bdodpjyklfxefx Adrjd with chain Availability: short-term Storage location: Röllbach

Condition: used, Year of construction: 1980, Used machine Condition: various small defects without chains Equipment and technical data: Stroke left/right: 150 mm, Top/bottom stroke: 150 mm Motor: 1.5 kW Can be used as a spare parts carrier Bdsdjw I U Nhepfx Adrod Availability: short term Location: Flörsheim

Condition: used, Year of construction: 2002, Double-sided softforming edge banding machine HOMAG type Power KF 20/34/QE/30, machine no. 0-202-25-8815, year 2002 Bedpfxsyyxc Rj Adrodd

Condition: used, maximum load weight: 211 kg, overall weight: 850 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,070 mm, loading space width: 1,080 mm, total width: 1,495 mm, total height: 1,150 mm, A57 GW26GA01495, Signatures of Eintracht Frankfurt players subsequently sealed with clear lacquer Product information "STEMA FT 8.5-20-10.1B" incl. jockey wheel and shock absorbers approved for 100 km/h with certification* * Optimal road handling due to stable chassis with safety V-drawbar Bdodpfxsyqdq He Adrsd * Robust rubber suspension axle with independent wheel suspension * Maintenance-free compact wheel bearings * Sturdy side panels with double corrosion protection through GALVALUME (aluminum-zinc coating) * Large and stable lashing hooks for load securing (model-dependent) * Robust cast steel angle lever locks (model-dependent) * Slip-resistant, waterproof phenolic plywood floor * All-round protected multifunction lights * Incl. lid/cover Low-loader, manufacturer: STEMA, type: FT 8.5-20-10.1 with lid/cover, gross weight: 850 kg, inertia braked, lid color: green/white, 100 km/h approval ...and much more. Subject to errors and prior sale.

Condition: excellent (used), functionality: fully functional, Chain Mortiser/Chain Chisel KF20, with several chains, very good condition, 1.7 kW, 380 Volt. Machine subject to differential taxation. Bsdpoxf Hziofx Adrsdd

Condition: used, Year of construction: 1938, Machine cleaned, function tested, trial run incl. various chain sets Used, good condition, low hours Manufacturer: Haffner Type: KF20 Year of manufacture: 1978 Machine no.: 20378 Column-type machine + undercarriage Chain set 12-17 / 50 x 175 J3 Door support Space requirement approx. 750 x 800 x 2000 mm Bdsdpfsythcfsx Adrjd Weight approx. 200 kg Location: 97447 Gerolzhofen, free on truck, unpacked Delivery as seen, without any warranty or guarantee

Condition: used, used manufactured by Haffner type KF20 wall machine workpiece rest Bodovwf T Ejpfx Adrjdd lubricant unit total connected power 1,5 kW located in  97447 Gerolzhofen sale in current condition as seen. Without repair work. Pickup in the short term. - free on truck -

Condition: good (used), Type KF-30 Bdsdpfx Adodrq Svsrjd In good condition Manual Motor 1,7 kW Tiltable Chain width 18 mm Made in Denmark Transport dimensions 700х700х1800 mm

Condition: used, Door lock mortiserused, good conditionmanufactured by Haffnertype SL 100stand machinechain set 12 - 17 / 50 x 150 mmworkpiece resthandle hole motorface-plate motorlubricant unitmechanical workpiece clampingrequired space ca. l x w x h mm1500 x 900 x 2010located in  97447 Gerolzhofensale in current condition as seen- free on truck - Bdedpfx Aevwfv Tjdrjd

Condition: used, Year of construction: 2003, Filter area: 50 m² Dimensions: 1650 x 1580 x 3550 mm Bdodpfx Adjzb N T Uerod Weight: approx. 500 kg Substructure with discharge screw: Briquetting press Schuko C 800 - 2 with extinguishing device Motor: 1.5 kW Weight: approx. 1200 kg Storage location: Supplier

Condition: used, Year of construction: 1997, travel distance X-axis: 3,708 mm, travel distance Y-axis: 1,208 mm, travel distance Z-axis: 1,002 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, CNC Bed-Type Milling Machine – Universal Bedpfxewtpfps Adrjdd ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Technical specifications: X travel: 3708 mm Y travel: 1208 mm Z travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35–3000 rpm Spindle motor: 22 kW Feed range: 6–5000 mm/min Rapid traverse: 15 m/min Machine weight: approx. 19.5 t ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/-120° (stepless) Milling head automatically swivelling in the rear axis / 90° rotation Coolant system The machine can be inspected under power. Delivery time: immediately Sale from location Westerkappeln Dismantling, loading available on request.

Condition: used, maximum load weight: 26,260 kg, overall weight: 31,000 kg, axle configuration: 3 axles, first registration: 11/1992, loading space length: 6,700 mm, * Schmidt container tipping chassis, type CKSA 10/22-20 * First registration: 1992 * Tare weight: 4,740 kg * Payload: 26,260 kg Bjdpsy T Tz Uefx Adrsdd * SAF axles * Air suspension * Locking mechanism for 20-foot containers * Overall length: 7.80 m * Loading area: 6.70 m

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Tilting Spindle Moulder MAKA SF 4510 / GRIGGIO with Power Feed Very good condition, the machine comes from a small village carpentry shop with 3 people. Everything works perfectly. Bjdpfx Adjy Rh Nzerjdd All bearings and guides are in excellent condition; the machine runs very smoothly. Equipped with a moulder fence, with one fence jaw adjustable in depth and featuring fine adjustment with scale, enabling jointing work, e.g., for a glue joint profile. The entire fence can also be adjusted via a set screw, allowing for very precise settings. With spindle locking via clamping lever. Chip extraction is very effective, with two 120mm diameter extraction ports on the fence and machine. Comes with a 30mm spindle, continuously tiltable from -5° to 45°, adjusted via handwheel, with a precise degree scale. Selectable clockwise/counterclockwise rotation. We deliver the machine in person anywhere in Germany for 220.00 EUR and carry out a demonstration, so you have no risk with your purchase. Delivery to other EU countries is also possible. Large table opening, adjustable with rings (this allows the use of cutters with a very large diameter and safe cutting with small cutters). Spindle speeds: 3200, 4200, 6000, and 8000 rpm. Spindle height adjustment via handwheel with locking screw. Spindle is exchangeable (a 40mm spindle can also be used). Optimal power transmission via V-belt drive. Machine table is 1070mm wide and 940mm deep. The machine is ready for immediate use. 380V, 5500W, with motor protection switch against overload. Year of manufacture: 1999. Weight: approx. 700kg. The machine has a CE certificate. Comes with manual, motor brake, and emergency stop switch, fully compliant with all requirements of the woodworking trade association (Holz-BG). Included is also a 3-roller power feed from HAFFNER with 8 speeds. Optimal, simple, fast, and safe operation.

Condition: used, Year of construction: 2012, Schuko type Octopus 20 Connection diameter: 200 mm Bdsdoy Agqhjpfx Adrsd Required air volume flow: 3,000 m³/h Required negative pressure: 1,100 Pa Table length: 3,280 mm Table width: 1,000 mm Table height adjustable from 700 to 1,000 mm Max. sound pressure level: 63 dB(A) Weight: 200 kg Year of manufacture: 2012

Condition: excellent (used), Double side Sizing & Edge banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 240 / 1000 Numerical Control / Software NC 21 / Homatic Adjustable feeding speed (m/min ) high speed 10 - 60 Bdjdpfsifnxxex Adrsd Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + A34 (high Speed package) Pressure zone Edge coils supporting unit (No. of reels) 2 Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit 2 x Kw 0,55 (0° - 30°) Finish processing unit (Glue scraper + Buffing unit) FA 11 Milling grooving unit UF11 (1 x Kw 4) 0°-90°

Condition: good (used), Guide cylinders, guide pneumatic cylinders, pneumatic cylinders, compact cylinders -Manufacturer: Festo, guide cylinder type DFM-25-20-PA-KF 170922 -Piston: Ø 25 mm -Stroke: 20 mm -Number: 2 cylinders available -Price: per piece Bjdpfx Adjxy Iutjrsdd -Dimensions: 93/95/H44 mm -Weight: 1.2 kg/pc.

Condition: new, bore capacity in steel (diameter) 13,0 mm x-travel 300 mm y-travel 130 mm turning speeds 100 - 2500 U/min throat 165 mm spindle taper MT 3 MK table-size 490 x 120 mm diameter of hob 30,0 mm motor 230 Volt total power requirement 0,75 kW weight of the machine ca. 50 kg. dimensions of the machine ca. 520x500x740 mm Scope of delivery: - Key chuck 1 - 13 mm / B 16 Bdjdpfxoxabb He Adrjd - Drill chuck arbor MK 3 / B 16 - tightening spindle M 12 - Height-adjustable protective cover - operating key

Condition: used, functionality: fully functional, Key Technical Specifications From official Elumatec documentation: Routing capabilities: Horizontal cutting range: With stop: 300 × 100 mm Using template: 270 × 70 mm Travel: 80 mm Vertical cutting range: With stop: 290 × 100 mm Using template: 230 × 70 mm Travel: 120 mm elumatec +1 Spindle speed: 12,000 rpm elumatec +1 Profile clamping capacity: up to 150 × 150 mm elumatec +1 Power supply: 230/400 V, 3-phase, 50 Hz Power output: 0.74 kW elumatec +1 Compressed air: 7 bar; air consumption per cycle: 12 l (no mist), 24 l (with mist) elumatec +1 Dimensions & weight: Length: 940 mm Depth: 1 150 mm Height: 1 600 mm Weight: approx. 260 kg Bdedpfxew Syzqj Adrod elumatec +1 Market Listing Highlights A listing from Modern Tool BC provides real-world equipment data that aligns closely with the official specs: Electrical characteristics: 240–575 V, 60 Hz, 3-phase (typical for North American markets) Motor power: 1.0 horsepower (≈0.75 kW) Spindle speed: 12,000 RPM Routing capacities: Horizontal with stop: 300 × 100 mm Horizontal with template: 270 × 70 mm Horizontal stroke: 80 mm Vertical with stop: 290 × 100 mm Vertical with template: 230 × 70 mm Vertical stroke: 120 mm Modern Tool BC Key features: Simultaneous routing in two planes without repositioning 1:1 copy ratio via stops or templates Two-handed operation for safety Two horizontal pneumatic clamps Includes air service unit, blank & keyhole templates, 8 mm & 10 mm collets, pulse spray mist coolant system, tools, and an operation manual Verify the accuracy of the information with the seller.

Condition: used, cleaned, function checked, test run with face-plate motor used manufactured by Festo type KF stand machine door rest base face-plate motor exhaust connection D 50 mm required space ca. l x w x h mm 1200 x 800 x 2000 Bdjdpevwfr Usfx Adrjd weight ca. 200 kg total connected power 1 kW located in  97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: new, Technical data for base plate: Shelving system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x Base plate, new Type designation: FT 211 Suitable for upright frame width: 120 mm Bdodpfx Aew Dnggsdrjd Material color: RAL 5010 Gentian Blue Material thickness: approx. 6.00 mm Overall width: 195 mm Overall depth: 105 mm Number of boreholes: 2 pcs Borehole diameter: 13 mm Weight: approx. 1.19 kg | per piece Includes the following fastening material: 02x Hexagon bolts M10 x 30 mm 02x Nuts M10 04x Washers M10 Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transportation or shipping of this item is required, additional costs will apply, which can be requested from us depending on the delivery location and/or scope of delivery.

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: Jung Heinrich Type: T Technical Data for Installation: Number of Racking Rows: 01 pc Length per Row: 25,300 mm Number of Bays per Row: 09 pcs Number of Levels incl. Floor Level: 02 pcs Technical Data for Capacity: Pallet Positions per Bay: 09 pcs Pallet Positions per Row: 81 pcs Total Pallet Positions: 81 pcs Based on: Load Carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total Height incl. Pallet: n.d. Maximum Pallet Weight: 900 kg Scope of Delivery Includes: 10x Pallet Racking Uprights, used Material color: blue Profile dimensions: 100 x 65 x 2.0 mm Incl. horizontal and diagonal braces, foot plates The uprights are pre-assembled (welded truss construction) Bsdpfx Adstq Hfujredd 2,200 mm high 1,100 mm deep 36x Pallet Rack Beams, used Material finish: Sendzimir galvanized Beam type: HN 120|20 Box profile: 120 x 50 mm Connector: 3-hook Clear span: 2,700 mm Max. load per beam pair: 2,700 kg, with evenly distributed load 72x Locking Pins, used Material finish: Sendzimir galvanized To secure the beams against unintentional lift-out 40x Wedge Anchors, new Manufacturer: Hilti Model designation: HST2 M12x105/10 Material: carbon steel, galvanized Approved for: cracked concrete 20x Shim Plates, used Finish: fully galvanized For leveling racking uprights placed on uneven floors 01x Load Sign With specifications for bay and shelf loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is only offered for collection. Any further transport or shipping of this item will incur additional costs, which can be requested from us depending on delivery location and scope.

Condition: good (used), 70 linear meters of shelving, Schäfer Type R7000 Used, in good condition, see photos. Height: 3 m Depth: 50 cm Load capacity per shelf: 200 kg Field width: approx. 99.8 cm Negotiable price: €9,490.00 net, ex warehouse. Offer includes: + 71 uprights/frames, 3 m, galvanized + 350 shelves, 200 kg load capacity per shelf, galvanized 5 levels per bay (more levels are available at an additional cost) Various heights up to 12 m available. Goods are in stock. Transport and assembly available upon request. Inspection possible at any time by appointment. Further information available upon request. Bdodpeh Et Twofx Adred We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our general terms and conditions, all prices excluding VAT, ex warehouse.) Purchase/Sale: We are continuously looking for and offering numerous items from various sectors: - Complete clearance of business premises - Business liquidation - Quick, flexible, and efficient! - We also clear and/or dispose of goods for insolvency administrators. Send us some keywords, and we will get back to you promptly. To visit our website, please click on our logo!

Condition: good (used), 30 linear meters of shelving unit, Schäfer Type R7000 Used, in good condition, see pictures. Height: 2.1 m Depth: 50 cm Load capacity per shelf: 200 kg Bay width: approx. 99.8 cm Negotiable price: €3,250.00 net, ex warehouse Offer includes: + 31 units of uprights/frames, 2.1 m, galvanized + 120 units of shelves, 200 kg load capacity per shelf, galvanized 4 levels per bay (more levels are possible for an additional charge) Various heights up to 12 m available. Goods are in stock. Transport and installation possible upon request. Inspection possible at any time by appointment. Further information available upon request. We continuously have over 5000 linear meters of pallet racking systems from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Purchase/Sale: We are continuously looking for and offering numerous items from various areas: - complete liquidation of business premises - business closures - fast, flexible, and efficient! - We also clear and/or dispose of goods for insolvency administrators. Please send us some keywords, and we will get back to you promptly. To visit our website, please click on our logo! Bdjdpsh Eulksfx Adred

Condition: excellent (used), We offer a climate test chamber for sale. Air-cooled Test chamber nominal volume: 280 liters Dimensions: External dimensions of the test chamber: 1500 x 2040 x 1075 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test chamber: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range: +5 to +100 °C Heating rate: 4.0 K/min Cooling rate: 0.6 K/min Climate range: +10 to +95 °C Humidity range: 10 to 95 % RH Humidity change rate: ≤ ± 3.0 Water connection for humidifier: Tap water or distilled water, 20-liter reservoir Power connection: 400 V 3/N/PE, AC, 50 Hz Bodpfxozd R T Te Adredd Maximum power consumption: 6.3 kW Weight: 500 kg Type: 3416/16 Refrigerant: R134a For your peace of mind as a buyer, please note the following: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated instruments. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.