Press Brake

HACO PPM 36100 - 3150 mm x 100 T

Condition: refurbished (used), Year of construction: 1996, machine/vehicle number: 02/510/004, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, input current: 63 A, input frequency: 60 Hz, stroke length: 265 mm, table height: 800 mm, total length: 2,670 mm, total width: 4,100 mm, total height: 2,800 mm, overall weight: 22,000 kg, travel distance X-axis: 500 mm, controller manufacturer: Cybelec, controller model: Visitouch 19" 2D, working width: 4,100 mm, bending force (max.): 225 t, back gauge speed R-axis: 100 mm/s, control type: CNC control, degree of automation: automatic, back gauge adjustment: CNC-controlled, number of axes: 4, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, foot remote control, Pressbrake fully updated with a new numerical control 2D from Cybelec Switzerland Djdpew I A Ncefx Akvswa

Condition: like new (used), TOOL FOR ROAD BARRIERS Dwsdjhylzrjpfx Akvsa LENGHT 6000mm

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, operating hours: 17,446 h, power: 11 kW (14.96 HP), input voltage: 400 V, oil tank capacity: 130 l, total length: 3,300 mm, total width: 2,000 mm, total height: 2,440 mm, overall weight: 8,900 kg, controller manufacturer: DELEM, controller model: DA65, working width: 3,100 mm, bending force (max.): 110 t, control type: CNC control, number of axes: 8, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, For sale: Used press brake DARLEY EHP-L 110 31/25, year of manufacture 2000. The machine is in excellent technical condition and is highly reliable. Very precise and offers repeatable results. In December 2023, all cylinder seals as well as the hydraulic oil and filters were replaced. In February 2024, the upper WILA tool clamping system was serviced. The machine has very few operating hours. Hydraulics: Hoerbiger Machine number: 122067 Machine type: EHP-L 110 31/25 Year of construction: 2000 Maximum pressing force: 1100 kN Working length: 3100 mm Power: 11 kW Voltage: 400 V Hydraulic oil tank capacity: 130 l Hydraulic system pressure: 28 MPa Weight: 8,900 kg Tooling type: Hydraulic Wila / Trumpf Control: DELEM DA65 Number of axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 + crowning compensation Dwsdpfx Asx N Ibhskvja If you have any questions or would like more information, please send us a message or contact us by phone.

Condition: used, Year of construction: 1990, pressure 25 t chamfer lenght 1250 mm distance between columns 970 mm Stroke beam 100 mm max. opening beam/table 270 mm C-recess 150 mm max travel X-axes 420 mm Dedpfey Ruw Eex Akvowa R1 and R2 axis controlled by cnc 100 mm Z1+Z2 axes controlled by cnc manuell mm Quick speed,inspeed 100 mm/sec bendingspeed 10 mm/sec opening speed 100 mm/sec length 1500 mm width 1000 mm height 2000 mm weight 1200 kg total power requirement 4 kW dimensions of the machine ca. 1,5x1,0x2 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: good (used), Year of construction: 2001, functionality: fully functional, HACO PPM 1640 Technical condition: Good Bending length: 1600 mm Tonnage: 40T Press brake type: NC controlled Backgauge: X-axis CNC controlled, R-axis manually height adjustable Dwedpeym At Ejfx Akvja Daylight: 295 mm Throat depth: 200 mm Stroke: 100 mm Control: Robosoft Motor power: 4.1 kW 380V Tooling: yes, upper tool + Multi V Tool clamping: European standard Serial number: 90646 Year of manufacture: 2001 Total length: 2100 mm Total height: 2300 mm Total depth: 1450 mm Weight: 2500 kg

Condition: new, roller (top) diameter: 56 mm, roller diameter: 56 mm, sheet thickness steel (max.): 1 mm, - Capacity 1050 x 1 mm - Roll diameter 56 mm - Conical roller - Swiveling top roller - Foot control - Emergency stop Dwodpfx Akjr Ixrkovsa - Documentation - 400V

Condition: defective spare-parts repository (used), Year of construction: 2004, machine/vehicle number: 20404881, Offer 23906 CNC - Flame Cutting Portal for Dismantling Technical data approx.: - CNC flame cutting portal with 4 torches as shown, for dismantling. - 4 x torches with automatic height adjustment - Torches feature tilt adjustment - CNC control unit NCE - Control cabinet - Track gauge approx. 3.5 m - Space requirement approx. 5 x 2.4 m Dsdpfxew Nwuce Akvowa

Condition: used, Year of construction: 1994, CNC bending press Manufacturer: Blemas Dwedpfsyvfklox Akvsa Type: 100-33 Year of manufacture: 1994 CNC control: Cybelec DNC 74 PSG Press force: 100 tons Working width: 3 m Weight approx.: 8 tons Dimensions approx.: 3,600 x 1,600 x 2,600 mm 22726

Condition: new, roller (top) diameter: 46 mm, roller diameter: 46 mm, input voltage: 400 V, empty load weight: 225 kg, - Capacity 1050 x 0.8 mm - Roll diameter 46 mm - Conical roller - Swivel top roller - Foot control - Emergency stop - Documentation Dwsdpfx Asr Iza Rjkvsa - 400V

Condition: used, Year of construction: 1994, machine/vehicle number: 884019, functionality: fully functional, power: 15 kW (20.39 HP), total length: 3,600 mm, total width: 2,300 mm, total height: 2,800 mm, overall weight: 8,800 kg, TRUMPF Trumabend 125/3 Year of manufacture: 1994 Control: CNC (DA58) Country of origin: Austria Press force 125 t Bending length 3050 mm Frame gap 2550 mm Total power requirement 15 kW Throat depth 350 mm Approach speed 130 mm/sec Working speed 1–10 m/min Return speed 100 mm/sec Backgauge – adjustable 1000 mm Stroke 200 mm Installation height 400 mm Press capacity 280 bar Space requirement approx. 3.6 x 2.3 x 2.8 m Machine weight approx. 8.8 t Control CNC Dsdoy Iydljpfx Akvjwa Control system DA58