2016 Haas VF-4SS

Haas VF-4SS

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, overall weight: 6,260 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS was manufactured in 2023. It features an impressive X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine includes a robust table size of 1,321 x 495 mm and a maximum table load of 794 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining centre we have for sale. Contact us for further details. • Condition: Like new, used • Functionality: Fully operational • Operating hours: 3,363 h • Spindle/machining hours: 2,402 hTravels • Spindle nose to table: 107–742 mmSpindle • Maximum spindle torque: 122 Nm at 2,000 rpm • Spindle drive: Inline direct drive • Spindle taper: CAT40 • Number of spindles: 1Table • Table dimensions: 1,321 × 495 mm • Number of T-slots: 5 Fgjdszwffkopfx Albeg • T-slot width: 15.9–16 mmTool changer • Tool capacity: 30+1 positions • Tool-to-tool time: approx. 1.8 s • Chip-to-chip time: approx. 2.4 sMachine dimensions and weight • Note: Dimensions in the original ad were incorrectly stated in millimetres instead of centimetres. • Export shipping dimensions without conveyor: 3,330 × 2,330 × 2,570 mm • Export shipping dimensions with chip conveyor: approx. 4,140 × 2,330 × 2,570 mm • Advertised machine weight: approx. 6,200 kg • Official weight with conveyor: approx. 6,260 kgInstalled options • Through-Spindle Coolant (TSC), 300 psi / 21 bar • Renishaw Wireless Intuitive Probing System (WIPS) • High-Speed Machining (HSM) • Programmable coolant nozzleElectrical • 400 V, three-phase power supply Additional equipment • Chip auger • Haas Chip Lift (chip conveyor) • Coolant mist condenser • Probe riser block • Approximately 15 tool holders • Documentation and manuals

Condition: excellent (used), Year of construction: 2015, operating hours: 22,387 h, Manufacturer: Hermle | Type: C 400 U | Serial number: 23589 | Year of manufacture: 2015 | Operating hours: approx. 8939 | Control system: Heidenhain TNC 530; Travel ranges (X/Y/Z): 850 / 700 / 500 mm; Swivel/rotating table: Ø 630 mm, integrated, C- and B-axis. Fgjdpozq Dkxofx Albjg Tool magazine: 38 positions; Spindle speed: up to 18,000 rpm; Drive power: approx. 20 kW; Machine weight: approx. 8,000 kg; Cooling system: Knoll 850 K-1 with high-pressure unit; Coolant system; Central filter with return conveyor and heat exchanger; NC swivel rotary table; The operating hours refer to spindle operation. | Dimensions: approx. 4000 mm x 3400 mm x 2700 mm (W x H x L) | Approx. 10,500 kg | The specified dimensions are approximate values. All other information is provided without guarantee. | Grey | Steel Category: Machines and technical equipment

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1183016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, workpiece length (max.): 1,270 mm, workpiece width (max.): 635 mm, workpiece height (max.): 508 mm, workpiece weight (max.): 794 kg, table width: 475 mm, table length: 1,321 mm, overall weight: 6,033 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 2,240 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, MACHINE Vertical machining center, HAAS, VF-4SS STANDARD EQUIPMENT: CNC control, 4 axes, HAAS type (NGC version), compatible with Fanuc, ISO programming, G-codes ISO40 spindle taper, CT type 1 GB memory capacity Fsdszt Nlmspfx Albogg 15" LCD monitor, touchscreen and USB port Ethernet + WiFi network card Early voltage drop detection module (prevents the effects of voltage drops) HaasConnect – remote monitoring of machine operating status via the Internet, VNC and DPRNT protocol Program restart – ability to start the program from any block RunStopJogContinue – ability to move the tool without interrupting the program SafeRun – active anti-collision system (minimizing the effects of collisions) Electronic handwheel Spindle cooling system Temperature compensation for ball screws Protective cabin with sliding front doors and side windows Side magazine with 30 positions Memory lock Spindle taper air blow system Thread cutting without a compensating chuck (rigid) Installation for connecting compressed air Cooling system with a pull-out coolant tank, filled with coolant Automatic central lubrication system Machine tool lighting "Guns" for air and coolant (mounted on the front of the machine) 4AXD – Machine preparation / connections, wiring / For connecting the table, without a table AUGER – Screw chip conveyor HSM – Faster processor with look-ahead function, accelerating the machining of shapes with 3-axis interpolation ACF – Additional 25 μm filtration system, essential for machining cast iron, aluminum, wood, and phenol-based and other dusty materials TSC* – Through-spindle cooling, pump with increased power /21 bar, 22 l/min/ (ACF option required) WIPS-R – Renishaw probe set, wireless, for measuring tool radius and length, for measuring and setting using (graphic) measuring cycles. SO – Spindle orientation MACRO – Parametric programming COORD – Scaling and rotation of the coordinate system VPS (Visual Programming System) – graphic machining cycles, expansion and creation of custom cycles

Condition: good (used), Year of construction: 2013, Haas VF4SS Year of manufacture: 2013 BT 40 spindle RPM: 12,000 TSC (Tool Side Center) Fgedpfozuazhox Albsg WIPS (Wireless Intuitive Probe System) 4th axis: HRT 210

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 132542, turning diameter over cross slide: 470 mm, turning length: 300 mm, turning diameter: 580 mm, spindle bore: 62 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 380 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,839 mm, total length: 1,865 mm, total width: 1,734 mm, overall weight: 3,200 kg, Equipment: documentation/manual, OKUMA LB2000EX-MC x 300mm OSP P200L CNC-Controller Number of axis - 3 Swing over bed - 580mm Swing over cross slide - 470mm Max dia. turning - 360 mm Max turning length - 300 mm X axis travel - 260 mm Z axis stroke - 390 mm Rapid X-axis 25,000 mm/min Z axis rapid 30,000 mm/min Spindle nose - Flat Main spindle speed - 6000 rpm Main spindle power - 11 kW Main spindle diameter - 100 mm Fgjdpjxrnr Nsfx Albog Kitagawa 6 inch chuck Driven tools - 6000rpm Driven tools - 5,5kW Turret type VDI 12 Stations Square tool section - 20mm Boring bar section - 32mm Tailstock Quill diameter - 70mm NC tailstock stroke - 415mm Konus - MK 4 Chip conveyor type high Wight - 3200kg One Touch dialog with colour High presure coolent

Condition: like new (used), Year of construction: 2023, operating hours: 3,363 h, functionality: fully functional, machine/vehicle number: 1201414, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, total height: 257 mm, total length: 333 mm, total width: 233 mm, table width: 495 mm, table length: 1,320 mm, table load: 794 kg, rotational speed (min.): 12,000 rpm, overall weight: 6,200 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 2,402 h, spindle motor power: 22 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We have two machines: SPECIAL PACKAGE PRICE – €125,000 FOR BOTH MACHINES Haas VF-3 YT50 (Ad ID A22113533) + Haas VF-4SS (Ad ID 22522747) Purchase both machines together for €125,000. Excellent opportunity to acquire a complete Haas machining package. • Haas VF-4SS • Taper CAT40 • Spindle: 12,000 rpm Inline Direct Drive • TSC (Tool Side Center) • Renishaw WIPS (Wireless Inspection Probe System) • High-Speed Machining • Mist Condenser • Chip Conveyor • 30 ATC (Automatic Tool Changer) • Cutting Hours: 2,402 hours • Cycle Hours: 3,363 hours • First owner (company) • Complete service history Fedpjztm N Nefx Albegg • Maintenance performed by authorized service provider Teximp d.o.o. • No crashes or major repairs • + Approximately 15 tool holders • Company-owned machine, located in Croatia • Immediately available • Operational and available for inspection • Ready for immediate production

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,403 h, functionality: fully functional, machine/vehicle number: 1201414, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,270 mm Travel range Y-axis: 508 mm Travel range Z-axis: 635 mm Fodpfjzl Rzysx Albegg Spindle speed: 12,000 rpm Tool interface: CAT40 Tool positions: 30 MACHINE DETAILS Operating time: 11,136 hours (as of July 26, 2026) Machining hours: 2,403 hours (as of July 26, 2026) Cycle hours: 3,364 hours (as of July 26, 2026) EQUIPMENT Internal coolant supply Renishaw intuitive wireless probe system Mist collector Chip conveyor Approx. 15 tool holders

Condition: ready for operation (used), Year of construction: 2023, operating hours: 208 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, number of axes: 2, Horizontal turning machine manufactured in 2023. This HAAS ST-15 features a maximum spindle speed of 4000 RPM and includes a 12-station bolt-on turret. It comes equipped with a Haas Bar Feeder and a hinged belt chip conveyor for efficient operation. If you are looking to get high-quality turning capabilities, consider the HAAS ST-15 machine we have for sale. Contact us for further details regarding this machine. • Condition: very good • Power on time: 1369:37:08 h • Cycle start time: 373:45:41 h • Feed cutting time: 208:26:21 h • Finished parts counter: 250 Fjdpfey R Dh Tox Albogg • M30 counter 1: 1577 • M30 counter 2: 14238 • Electrical: 440 V, 3-phase, 50/60 Hz • Full load amps: 20 A • Largest load: 18 A • Sub-spindle: not equipped (max speed 0 rpm) • LT-spindle: not equipped (max speed 0 rpm) • Memory: 1 GB Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis HAAS VF-4SS was manufactured in 2019. It features an X-axis travel of 1270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine is equipped with a spindle speed of 12,000 rpm and includes a chip conveyor, coolant filtration system, and a 4th axis drive. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining centre we have for sale. Contact us for further details. • Spindle nose to table (max): 742 mm • Distance spindle nose to table (min): 107 mm • Through-spindle coolant: Yes • Programmable coolant nozzle: Yes Fgedpfx Asza A Enelbjg • Rigid tapping: Yes • Visual part programming system: Yes • Ethernet interface: Yes • Remote monitoring: HaasConnect + HaasDrop • Electronic handwheel with touchscreen: Included • Coolant filtration system: Included • 4th axis drive and wiring: Included • Air blast through spindle: Included • Coordinate rotation and scaling: Included • Tool presetting arm: Included • Working light: Included • Standard memory: 1 GB • Machine orientation: Vertical • Installation and basic training: Included • Warranty: 12 months Additional equipment • Chip conveyor: Auger type • HRT210 Rotary Table (CNC rotary table) • Servo drive: Sigma 5 • Manual tailstock: 6" • Compatibility noted: VF-4SS

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS vertical machining center was manufactured in 2008. It features a 1270 × 508 × 635 mm travel range, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine includes a 40 + 1 position tool changer and a high-speed machining package. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4SS machine we have for sale. Contact us for more information. Fodpfsx D Irmsx Albjgg • Distance spindle–table: 102 mm • Tool holder taper: CT40 (DIN 69871) • Max cutting feed: 20.5 m/min • Rapid feed (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/Features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Additional equipment • Screw-type chip conveyor • Auxiliary high-pressure filtration system

Condition: used, Year of construction: 2014, operating hours: 43,665 h, functionality: fully functional, machine/vehicle number: 15175183874, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, feed length X-axis: 1,800 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 900 mm, operating hours of spindle: 17,437 h, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, 5-Axis Traveling Column Milling Machine DMG MORI DMF 180-7 | Year of Construction 2014 | B-Axis & Integrated Rotary Table For sale is a high-precision 5-axis traveling column milling machine from the manufacturer DMG MORI, model DMF 180-7, from the year 2014. The machine is extensively equipped and features a B-axis (swivel head) and a rotary table integrated into the fixed table for complex machining operations. General Machine Data * Manufacturer: DMG MORI * Model: DMF 180-7 * Year of Construction: 2014 * Machine Number: 15175183874 * Operating Hours: 43,665 h * Spindle Hours: 17,437 h * Machine Weight: approx. 13,250 kg Working Area & Dynamics * X-Axis: 1,800 mm * Y-Axis: 700 mm * Z-Axis: 700 mm * Rapid Traverse: 40 m/min * Acceleration: 4 m/s² Control System * Type: 3D Control Siemens SINUMERIK 840D sl Fgjdpfx Aozyplgelbjg * Control Panel: ERGOline Control with 19" screen * Software Options: Surface interpolation TRACYL, COMPCAD compressor function (for HSC machining), 3D machining/tool correction, turning-milling cycle Spindle & Milling Head (5-Axis Configuration) * Head: Swivel head (B-axis) * Speed: 20 to 14,000 rpm * Spindle Power: 18.9 / 14 kW (40/100% ED) * Tool Clamping: SK40 according to DIN 69871 Tool Table * Design: Fixed table with centrally integrated rotary table * Clamping Area Fixed Table: 2,100 x 700 mm * Rotary Table Diameter: 750 mm * Max. Load Capacity Rotary Table: 500 kg Tool Changer * Magazine Capacity: 60 positions SK40 * Type: Chain magazine with dual gripper * Chip-to-Chip Time: 7.6 s Coolant, Disposal & Extraction * Internal Coolant Supply (ICS): 40 bar / 980 l system with paper band filter * Chip Disposal: Chip conveyor (drag chain) * Extraction: Oil and emulsion mist separator (1,600 m³/h) * Additional Functions: Air blow through the spindle center (via M-function), coolant gun for chip flushing Additional Equipment & Measuring Technology * Measuring Probe: Infrared measuring probe TS649 DMG * Kinematic Measurement: Preparation for 3D quickSET Toolkit * Cabin: Full cabin with operating mode 4 From an insolvency proceeding, sale in open auction. Offer deadline until September 30, 2026, 6:00 PM. Package price for several machines from this proceeding is possible. Inspection: September 16, 2026, 10:00 AM – 12:00 PM, Fraunhoferstraße 10–12, 04178 Leipzig. Collection: October 6, 2026, 9:00 AM – 4:00 PM. Further information and offer submission can be found on our IKV Fester GmbH website under Auctions.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 7,100 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, table load: 794 kg, TECHNICAL DETAILS Travel X: 1,270 mm Travel Y: 508 mm Travel Z: 635 mm Rapid traverse speed X/Y/Z: 35.6 m/min Distance spindle nose to table max.: 742 mm Distance spindle nose to table min.: 107 mm Max. spindle speed: 12,000 rpm Spindle drive power: 22.4 kW Table dimensions: 1,321 x 495 mm Max. table load: 794 kg Tool changer positions: 24+1 Max. tool weight: 5.4 kg Tool change time: 1.8 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 3,000 x 2,500 x 2,600 mm Weight: approx. 6,800 kg Cycle start time: approx. 10,100 h Feed time: approx. 7,100 h EQUIPMENT Haas control with synchronous tapping Wireless probing system Coolant system with programmable coolant nozzle Spiral chip conveyor Fsdpfx Alextbtiobogg

Condition: good (used), Year of construction: 2010, X Y Z: 1270 x 508 x 508mm, table 1324 x 457mm, 12000 rpm, BT 40, HAAS Control, Fgjdpfx Alexpw Rvsbog 24 Station ATC, 40HP, chip auger, coolant, Haas TR210 5 axis trunnion table

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, total height: 3,280 mm, overall weight: 24,000 kg, spindle speed (max.): 12,000 rpm, tool weight: 25,000 g, number of axes: 4, This 4-axis Okuma MA 600 HB was manufactured in 2011, featuring a robust horizontal machining center design. It boasts X, Y, and Z axis travels of 1,000 mm, 900 mm, and 1,000 mm respectively, and a maximum spindle speed of 12,000 rpm. The machine includes a high-capacity 150-tool chain magazine with rapid tool change times. Consider the opportunity to buy this Okuma MA 600 HB horizontal machining center. Contact us for more information about this machine. • Spindle center to table surface: 50 to 950 mm • Spindle nose to pallet center: 70 to 1,070 mm Fjdpfx Ajx D Hzyjlbegg • Table / Pallet • Max rotation dimensions: 1,000 × 1,000 mm • Continuous table positions: 360,000 • Pallet change time: 7 sec • Pallet type: MAS perforated • Cooling through spindle: 20 bar • Compressed air pressure: 46 bar • Feed • Cutting feedrate: 60,000 mm/min • Positioning accuracy X-Y-Z: 0.004 mm • Repeatability X-Y-Z: mm • Tooling / Magazine • Tool change time (tool/tool): 1.9 sec • Tool change time (chip/chip): 4.4 sec • Tool selection: random • Max tool diameter (non-adjacent): 240 mm • Floor space: 3.38 × 6.11 m • Installed power: 50 kVA • Machine features • Work area shower wash system: Yes • Presetting at table edge: Yes • Provision for probe / zero offset: Yes Additional equipment • Chip conveyor: Mayfran Dimensions Machine Depth 3380 mm

Condition: ready for operation (used), Year of construction: 2012, operating hours: 18,699 h, functionality: fully functional, machine/vehicle number: 1095132, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, table width: 457 mm, table length: 1,321 mm, TECHNICAL DETAILS Travel X-axis: 1,270 mm Y-axis: 508 mm Z-axis: 635 mm Table Length: 1,321 mm Width: 457 mm Max. load: 794 kg Spindle Fgedpfx Aexb Uhislbsg Speed: 12,000 rpm Drive system: Inline Direct Drive Power: 22.4 kW Max. torque: 122 Nm at 2,000 rpm Feeds Rapid traverse X / Y / Z: 35.6 m/min Max. cutting feedrate: 21.2 m/min Tool Changer Capacity: 24+1 Type: CT 40 Max. tool diameter: 76 mm Tool-to-tool time: 1.6 s Chip-to-chip time: 2.2 s MACHINE DETAILS Dimensions Height: 3,023 mm Width: 3,886 mm Depth: 2,667 mm Operating Hours Cycle start time: 18,699 h Power-on time: 23,179 h EQUIPMENT 40 + 1 position tool changer, BT40 High-pressure spindle coolant 63 bar (TSC 1000) Coolant tank 360 liters Chip conveyor, spiral type 4th axis HRT 210, 210 mm including tailstock Wireless Intuitive Probe System (WIPS R) Renishaw OTS tool setter Renishaw measuring probe Intuitive Programming Screen (IPS) Programmable coolant nozzle (P-Cool) Approx. 15 tool holders