HAAS VF-3

HAAS VF-3

Condition: ready for operation (used), Year of construction: 2011, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: 1084327, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 10,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS X-axis travel: 1,016 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Spindle speed: 10,000 rpm Number of tool pockets: 40 Tool holder: BT 40 Pjdpfxeyfuq Ts Ahzopl MACHINE DETAILS Control: Haas Spindle hours: approx. 4,500 h EQUIPMENT Chip conveyor Paper band filter Hardened clamping plate, 20-M10 Zero-point clamping system System 3R GPS 240 Tool measurement / tool breakage monitoring Digital 3D probe Renishaw Automation interface Automatic door Oil mist extraction Internal coolant supply

Condition: good (used), Year of construction: 2001, grinding length: 650 mm, grinding width: 525 mm, total height: 350 mm, table length: 600 mm, table width: 350 mm, Manufacturer: Geibel & Hotz Type: FS 635-Z SA Control: Digital read out Year of construction: 2001 Magnetic table 600 x 350 mm Closed housing for CE Automatic vertical lubrication SA Automatic lubrication Coolant tank Specifications Metric US Standard X - axis 650 mm Y - axis 525 mm Z - axis 350 mm Table length 600 mm Table width 350 mm Table load 400 Feed X - axis 35000 mm/min. Feed Z-axis 1000 mm/min. Grinding stone dimensions 300 x 50 x 76.2 mm Power output 3.7 kW Speed 2800 ? rpm Dimensions (estimate) length 3200 mm width 2000 mm height Ppsdpfxsvdal Ae Ahzol 2870 mm weight 2300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,931 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 4-axis HAAS VF-3SSYT with HRT 210 4X was manufactured in 2018. It features a 12,000-rpm spindle, 30+1 side-mount tool changer, and through-spindle coolant at 300 psi. The machine includes a 4th-axis drive, wireless probing system, and high-speed machining capabilities. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SSYT machine we have for sale. Contact us for more information about this machine. Ppjdpeyalh Esfx Ahzol Additional equipment • High-Speed 30+1 Side-Mount Tool Changer / Advanced Tool Management / Early Power-Failure Detection Module / Multi-Stage Coolant Pump / Rigid Tapping Safe Run / Media Display M-Code; M130 / Power Surge Protection / Window Air Blast / Visual Part Programming System / User-Definable Macros / Spindle Orientation / Coordinate Rotation and Scaling / Chip Tray Filter Kit / CT-Style Tool Changer Grippers / Through-Spindle Coolant, 300 psi (21 bar) / 4th-Axis Drive and Wiring / Wireless Intuitive Probing System / Chip Auger / Programmable Coolant Nozzle / High-Speed Machining / Large Remote Jog Handle with Touchscreen Display / High-Volt Transformer, Non-USA Machine Benefits Technical Machine Benefits • Spindle speed: 12000 rpm • Standard program memory: 1 gb / control widescreen monitor • Remote monitoring: haasconnect / ethernet interface / wifi connection for the haas control • HRT rotary table is available for additional 9.000€.

Condition: used, Year of construction: 2019, x-travel 1016 mm y-travel 660 mm z-travel 635 mm control Haas Ppodpfxoyclx Ao Ahzel

Condition: like new (used), Year of construction: 2017, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,250 mm, workpiece length (max.): 975 mm, empty load weight: 4,200 kg, Equipment: cooling unit, Fanuc Robocut C800iB - Model Year 2017 Fanuc's largest wire EDM machine AWF Automatic Wire Threading Turkish Control Unit - Touchscreen Fanuc Link i Remote Control Water Cooler Core Joint Part Holding Twin Servo Wire Tension Control Thermal Compensation Fanuc New Series 15" Touchscreen and Turkish Control Unit Pjdoxfaqkjpfx Ahzjpl Able to make 5 cuts with the standard new power supply and achieve a surface quality of 0.30 microns. New lower head design and lower head tube protected by bellows. Twin Servo wire tension control ensures consistently stable wire tension during cutting, resulting in more precise cuts. Advanced AWF2 system allows for wire threading at the point of breakage. Program transfer and remote control via CF card, USB, RS232C, and Ethernet Standard Features Maximum throughput workpiece clamping (mm): 1250 x 975 x 500 mm Maximum workpiece weight (kg): 3000 kg X-Y axis travel (mm): 800 x 600 mm Z axis travel (mm): 510 mm U-V axis travel (mm): 200 x 200 mm Maximum cutting angle (°/mm) std. Maximum cutting angle (°/mm) opt.: ±30° / 150 mm : ±45° / 70 mm Minimum axis travel (mm): 0.0001 Wire diameter (mm): Ø 0.1 ~ Ø 0.30 Maximum wire weight (kg): 16 kg Footage (mm): 2900 × 3260 mm Machine weight (KG): 4200 kg Control unit: FANUC

Condition: excellent (used), Year of construction: 2012, operating hours: 27,960 h, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 27,900 h, number of spindles: 1, number of slots in tool magazine: 41, Haas VF-3SSYT 5 axis Technical specifications: travel distance X-axis : 1016 mm travel distance Y-axis : 660 mm travel distance Z-axis : 635 mm • Spindle 12,000RPM • Tool Clamping SK/BT 40 • Tool Magazine – 40 Places +1 Psdpfx Aexbifcjhzspl • Chip conveyor • ICS included (might be 30 bar) • Process Measurements – Renishaw Kit – OMP+OTS • Production Date –2012 • Spindle time - 27900 • 5 axis on the table Located in Israel 2 hour from international Airport under power and ready for inspection

Condition: used, Year of construction: 2008, x-travel 1016 mm y-travel 660 mm z-travel 635 mm control Haas table surface area 1.372 x 610 mm table load 1.814 kg rapid traverse 18 m/min turning speed range 7.500 U/min power capacity - milling spindle 22,4 kW tool taper SK 50 | no. of tools in the magazine 30 Stück weight of the machine ca. 7,5 t dimensions 3,5 x 2,47 x 2,98 m Vertical Machining Center - chipconveyor - external handwheel - Dual tool change arm - internal coolant - filter - 4th axis, 1HRT 210 A with tailstock Ppodpfx Ahswvl Aijzel - Oil dust collector

Year of construction: 2022, condition: new, Ostas 3-roller round bending machine SBM 1270 x 95 Special equipment included in the price: Hardened rollers Motorized rear roller adjustment Digital display Features: - Asymmetrical 3-roller round bending machine with motorized drive - Hardened rolls - Motorized rear roll adjustment - Digital display - Upper roll can be swung out - Conical bending device - foot switch Technical details: - sheet width: 1270 mm - sheet thickness: 3,0 mm - roll length: 1270 mm - Roll diameter: 95,0 mm - Smallest bending diameter: 140,0 mm Ppjdpfx Asg Tzbhehzjl - Motor power: 1,1 kW - Dimension L-B-H: 2100 x 760 x 1250 mm - weight: 470 kg

Condition: used, Year of construction: 2009, x-travel 1016 mm y-travel 660 mm z-travel 635 mm control Haas table surface area 1.372 x 610 mm table load 1.814 kg rapid traverse 18 m/min turning speed range 7.500 U/min power capacity - milling spindle 22,4 kW tool taper SK 50 | no. of tools in the magazine 30 Stück weight of the machine ca. 7,5 t dimensions 3,5 x 2,47 x 2,98 m Vertical Machining Center with 4th axis Podpfx Aowvl Acohzspl - chipconveyor - external handwheel - Dual tool change arm - internal coolant - filter - 4th axis, HRT 210 A - prepared for cableless 3D touch probe - oil dust collector - tool measuring

Condition: ready for operation (used), Year of construction: 2018, 3-axis machining center Brand: HAAS Type: VF3 Year: 2018 CN: HAAS Equipped with: 30+1 position tool changer Chip evacuation screw 20 bar center coolant 10,000 rpm spindle Specifications: Table surface 1219 x 457 mm X-axis travel 1016 mm Y-axis travel 508 mm Z-axis travel 635 mm Max. load. on table 1588 kg Spindle speed 1 - 10,000 rpm Spindle power 22.4 KW Spindle taper ISO 40 Podpfx Ahsvlk R Eezjpl Rapid feed 25 m/min Machine dimensions approx. 2997 x 2794 x H 3048 mm Weight approx. 5600 kg

Condition: new, ROGI SAW MACHINE TYPE CY355 INVERTER VARIO SPEED Psdoga Tzxopfx Ahzopl SEMI-AUTOMATIC Sawing dimensions ----- 3770 x 34 x 1.1 mm Cutting speeds ----- variable 20-80 M/min. Motor Power ----- 2.2 KW - 400V - 3 Phase Weight ----- 855 KG Cutting capacity 90 ----- 355 mm / 490 x 300 mm Cutting capacity 60 ----- 230 mm / 180 x 220 mm Cutting capacity 45 ----- 350 mm / 290 x 340 mm Cutting capacity -45 ----- 290 mm / 250 x 250 mm INCLUDED Saw band Workpiece stop Pedestal Pressure gauge for sawbelt tension Saw band guide with carbide inserts Hydraulic quick-clamp Cooling pump Hydraulic bag cylinder Motor protection switch Automatic end stop

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,163 h, Control Unit Brand HAAS Main Drive Spindle speed range 12000 Number of axis 3 Movement X-Axis Movement 1016 mm X-Axis Rapid Traverse 30.5 m/min Y-Axis Movement 508 mm Y-Axis Rapid Traverse 30.5 m/min Z-Axis Movement 635 mm Z-Axis Rapid Traverse 30.5 m/min Pedpfxjx D I Ste Ahzjpl Table Table load 794 kg This 3-axis HAAS VF-3SS was manufactured in 2017 and features a robust Haas CNC Control. It offers X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine supports a spindle speed of 12,000 rpm and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, operating hours: 238 h, General Data Machine weight 7212 kg Control Unit Brand HAAS Main Drive Spindle speed range 7500 Number of axis 3 Pedsx D Itqspfx Ahzepl Movement X-Axis Movement 1016 mm Y-Axis Movement 660 mm Z-Axis Movement 635 mm Table Outer length 1372 mm Outer width 610 mm Tools Slots in storage 30+1 This HAAS VF-3YT/50 Vertical Machining centre was manufactured in the year 2017 in the United States and has 238 production hours. It is equipped with a HAAS control unit and has 3 axis. The machine has a spindle speed of 12000 rpm. Application Types Milling

Condition: good (used), Year of construction: 2010, X Y Z: 1270 x 508 x 508mm, table 1324 x 457mm, 12000 rpm, Ppjdpfx Asxpw Rvehzjl BT 40, HAAS Control, 24 Station ATC, 40HP, chip auger, coolant, Haas TR210 5 axis trunnion table

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 5670 Main Drive Spindle speed range 8100 Spindle motor power 22.4 kW Movement X-Axis Rapid Traverse 24.5 m/min Y-Axis Rapid Traverse 24.5 m/min Z-Axis Rapid Traverse 24.5 m/min Table Outer length 1219 Outer width 457 Tslots size 16 MM Number of tslots 15 Distance between 80 MM Min distance between vertical spindle and table 102 Max distance between vertical spindle and table 737 Table load 1588 KG Tools Slots in storage 15 Max weight 5.4 Pedpfx Ahex D N I Nszspl Max tool diameter 189 This 3-axis milling machine was manufactured in 2014. Equipped with a powerful 22.4 kW spindle and precise positioning accuracy of 0.005 mm, this HAAS VF-3 offers exceptional performance for machining tasks. Its 20-tool horizontal carousel magazine ensures efficient tool changes, while the 15" LCD color monitor enhances user interface. With a maximum table load of 1588 kg and rapid traverse rates of 25.4 m/min, buy this HAAS VF-3 milling machine for versatile and reliable production capabilities. Contact us for further information. Application Types Milling