Vertical machining center

HAAS VF-2SS vertical machining center

Condition: excellent (used), Year of construction: 2018, operating hours: 10,035 h, functionality: fully functional, Emco Hyperturn 45 Machine with few operating hours and in very good condition! Only small parts were manufactured; it was never used for truly heavy work. The machine has a very extensive range of equipment: - Spindle bore 46 mm - Y-axis in the upper turret - Turret VDI 25 with driven tool stations - Part ejector and part collection tray - Part conveyor belt - Higher coolant pressure (14 bar) - 2x Hainbuch collet chuck Mini SK 52 Ljdey Udv Sopfx Anusac - Tool measurement - Emco bar feeder - Chip conveyor - LED status indicator Software: Siemens 840D-sl with Shopturn + Tool breakage and wear monitoring + 4-axis turning/balance cutting + Shopturn expansion package (residual material detection) + Energy management / automatic shutdown The machine is fully functional and is still in production; inspection is possible at any time. The machine is available immediately. All scrapers and wiper blades are in very good condition! The control cabinet is very clean, with no oil mist deposits.

Condition: used, Year of construction: 2007, max. wheel diameter 380 mm gear width 540 mm max. module 7 Laedpsyt Rvhsfx Anusc Control SINUMERIK 840 D Axial travel 600 mm table diameter 317 mm table speeds 100 U/min milling head -swivable + / - 35 Grad milling spindle drive 27,00 kW milling spindle speeds (infinitely variable) 1500 U/min diameter of hob 160 mm cutter length max. 330 mm cutter speeds max. 3000 1/min hob dia. - max. 160 mm swarf cutter lenght - max. 330 mm tangential travel max. 300 mm 10.000 mm/min tangential speed max. 3000 mm/min 7.500 mm/min oil volume 100 l coolant capacity 780 l Counterholder movement 540 mm total power requirement 50,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 6,00 x 4,50 x H3,50 m for the following processes: axial hobbing, individual part milling, Worm wheel milling, roofing, deburring; NC tailstock

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 2300 mm Measurements depth 2800 mm Measurements height 2700 mm Machine weight 4500 kg Lsdpfx Ajx D Ikponueac Main Drive Spindle speed range 10000 Spindle motor power CAT40 / SK40 Number of axis 4 Movement X-Axis Movement 762 mm X-Axis Rapid Traverse 24 m/min Y-Axis Movement 508 mm Y-Axis Rapid Traverse 24 m/min Z-Axis Movement 610 mm Z-Axis Rapid Traverse 24 m/min Table Tslots size 18 mm Number of tslots 5 Table load 750 kg This 4-axis Hurco VMX30 was manufactured in 2004. It features a CNC milling machine with a rotary table for 4th axis capabilities. Key specs include a 762 mm X-axis travel, 508 mm Y-axis travel, 610 mm Z-axis travel, and a table size of 1,016 × 508 mm. It supports a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 24. Consider the opportunity to buy this Hurco VMX30 vertical machining centre. Contact us for more information. Application Types Milling

Condition: like new (used), Year of construction: 2012, Bridgeport VMC 600 ECO Ledpfxoxtxk Se Anusac Machining Center Bridgeport VMC 600 EC with Heidenhain ITNC 530 Control, Year of manufacture 2012, in excellent original condition. The machine comes from the training workshop of a renowned German engineering company. Tjbqsxqc Iceuwlfwjd CE compliant!! Technical Data: Year of manufacture: 2012 Condition: Good Control system: HEIDENHAIN ITNC 530 Travel in the X/Y/Z axes: 600/410/520 mm Rapid traverse in X/Y/Z axes: 40/40/20 m/min Table dimensions (L x W): 840 x 420 mm Maximum workpiece weight: 500 kg Maximum spindle speed: 8,000 rpm Minimum spindle speed: 40 rpm Spindle taper: BT 40 Spindle drive power: 8.5 kW Maximum tool length: 250 mm Maximum tool weight: 6 kg T-slot width: 18 mm T-slot spacing: 112 mm Positioning accuracy: ± 0.005 mm Repeat accuracy: ± 0.002 mm Power supply: 3x 400 V; 50 Hz Dimensions (L x W x H): 2000 x 2050 x 2535 mm About the machine: Offered here is a Bridgeport VMC 600 EC machining center equipped with a Heidenhain ITNC 530 control system. This machining center is in excellent original condition. It comes from a facility where it was used sparingly for training purposes only. The control system is very user-friendly. The guides are lubricated regularly via the central lubrication system. The Bridgeport VMC 600 EC has been mechanically and electrically inspected by us. Take the opportunity to view and test the Bridgeport VMC 600 EC under power on site. You can find further milling machines from well-known manufacturers on our website.

Condition: good (used), Year of construction: 2014, Technical data shown on photos. Ledpfxsufp Sve Anujac Parts shown by hand not come.

Condition: excellent (used), Year of construction: 2021, operating hours: 7,950 h, functionality: fully functional, Vertical Turning Center / Vertical Lathe Manufacturer: EMAG Model: VL6 (FANUC) Year of Manufacture: 2021 Operating Hours: approx. 7950 Total weight : 10,5T Main spindle 28,5 KW Power at 40/100% ED 41/28,5KW Torque at 40/100% ED 491/340 Nm Full power at spindle speed 800 rpm Laodpfx Aswzwu Ijnusc Max. speed 3100 rpm Slide Unit X, Z HP Turret Drive Unit for Driven Tools (C362) with internal coolant supply to the tool Max. speed: 9600 rpm Full power at 3000 rpm Torque at 100% ED 33/Nm/10,4 kW Torque at 40% ED 44/Nm/13,8 kW Torque at 10% ED 56/Nm/17,6 kW Tool holder unit for driven tools: 12 x BMT65 Component storage and transport system conveyor, O-Type (GO 240") carrier prism system for 10 components Workpiece height : max. 250 mm Workpiece weight: max. 40 kg Set (10 pcs) of carrier prisms for workpiece diameter: 150 - 300 mm Blow-off Device for Workpiece and Clamping Device (Pick-Up) Coolant Supply: 15 bar Coolant pump capacity: approx. 80 l/min at 15 bar Cooling unit (6.5 kW, water - air) Coolant double filter, manually switchable Filtering fineness 100 μm, with electric and mechanical contamination indicator Swarf conveyor, chain type - rear discharge Hinged belt version: rear discharge Chip discharge height 1,100 mm (with integrated coolant tank, capacity approx. 500 l) Emulsion Mist Extraction: Extraction rate approx. 800 m³/h Rinsing gun Workpiece Measurement with Probe Probe blow-off Tool life monitoring (sister tool management) 3-Color Signal Tower Quick-Jaw changing chuck SMW autoblok KCNS-N400-128 max. = 3500 rpm Set of hard base jaws Set of soft top jaws Software Package Operating Manual / Maintenance Manual

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° control FANUC Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. Laodpfx Aneqvd Iuouoc - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 600 mm turning dia. over face-slide: 540 mm turning length: 550 mm longitudinal traverse (z-axis): 800 mm facing movement (x-axis): 260 mm control: Fanuc 18i-TB spindle bore: Ø 73 mm bar material dia.: Ø 65 mm revolution per minute: 0 ... 5000 steples U/min max. torque on the spindle: max. 250 Nm rapid traverse in x-y-z axis: X/Z: 30 m/min. / Y: 12 m/min. rapid traverse c-axis: 1000 U/min. tool turret - number of stations: 12 (Sauter) operating pressure: 6,0 bar electrics - voltage/frequency: 3 x 400 / 50-60 V/Hz operating pressure: 6 bar total power requirement: 40 kVA Weight approx.: 5,7 t dimension machine xH: 2,2 x 3,4 x 2,4 m dimension swarf conveyor LxWxH: ca. 2,9 x 0,6 x 0,55 (0,38 to) m dimensions LxWxH: Spänewanne: ca. 1,6 x 1,3 x 0,25 (0,2 to) m transport measurements machine: ca. 3,3 x 1,9 x 2,2 m The machine has a C-axis, E-axis, Y-axis, and W-axis. Powered tools can be used in all positions. Distance between spindle and counter spindle = 1050 mm. Counter spindle: A2-6, travel distance 800 mm, spindle diameter 105 mm, torque 250 Nm. Control cabinet equipped with Rittal cooler With hinged chip conveyor Lodpfx Aevvtpxenusac Chip tray Compressed air gun The machine has NO lathe chucks on sale as is! *

Condition: used, Year of construction: 2005, 5-Axis Simultaneous Hermle U740 Travel: X-915 mm, Y-500 mm, Z-500 mm Control: Heidenhain iTNC530 Spindle speed: 18.000 U/min Spindle mount: SK40 tool magazine: 16 seats B-axis: hydraulic clamping –5°/+95° NC rotary table: 630 mm max. table load: 500 kg probe: Heidenhain electric handwheel: Heidenhain table size: 1000 mm x 560 mm Ledpfx Aneyxh Sfoueac Spänewanne: .

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 30 with Kitagawa 4th axis, through-spindle coolant (IKZ), NC vise 125, various tool holders, well-maintained condition Lsdpfx Asxrcnljnuoac