Vertical machining center

Haas TM-1HE

Condition: used, X Axis 30.0 in 762 mm Gtsdpfsiypzdsx Ahvsw Y Axis 16.0 in 406 mm Z Axis 16.0 in 406 mm Read for inspect Ready for delivery

Condition: ready for operation (used), Year of construction: 2011, Travel X/Y/Z: 1000mm/500mm/635mm, tool holder: BT40, spindle speed: 10000rpm, tool positions: 40, control: Haas, spindle hours: approx. 4500h. 3-axis robot System 3R WorkPartner, year of manufacture: 2005, transfer weight: 80kg, stroke: 1500mm, pallet positions: 20. Including System 3R GPS 240 zero-point clamping system, tool measurement, tool breakage control, Renishaw 3D probe, and oil mist extraction. Documentation available. An on-site inspection is possible. Gjdpfx Ahoxg Riasvetw

Condition: refurbished (used), Year of construction: 2002, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 350523, Equipment: CE marking, Voltage: 380V Net weight: 1400 kg Customs tariff number: 8458.1120 Dimensions: 180x128x172 cm TECHNICAL SPECIFICATIONS CAPACITIES Maximum turning diameter: 270 mm Maximum diameter above cross slide: 115 mm Height of center above cross slide: 60 mm Turning length B32: 265 mm Center height above floor: 1,162 mm SPINDLE A2-4 / Camlock D1-3’’ Spindle for Schaublin collets: Hainbuch / F38 / B32 Spindle speed: 50–5,000 rpm AC motor drive: continuous/intermittent power: 5.5 / 7.5 kW AC motor drive: continuous/intermittent torque: 42 / 58 Nm Spindle bore (without clamping key): 39 mm Maximum bar capacity with collet: 32 mm Maximum bar capacity with automatic chuck: 32 mm PNEUMATIC CLAMPING Adjustable axial clamping force, force at 5 bars: 1,150 daN CROSS SLIDE Cross travel, X-axis: 190 mm Resolution, X-axis (radius): 0.0005 mm AC motor drive: continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 20 x 5 mm Longitudinal travel, Z-axis: 390 mm Resolution, Z-axis: 0.001 mm AC motor drive: continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 32 x 5 mm Gtjdpfx Aex Upugohvjw FEED RATES Working feed rates, X and Z axes, stepless: 0–5 m/min Rapid traverse, X and Z axes: 8 m/min TURRET TOOL SYSTEM Standardized toolholder mounting: VDI 20 Number of fixed/tool stations: 8 / - Maximum tool section: 16x16 mm Integrated coolant and bi-directional indexing: yes COOLANT SYSTEM Tank capacity: 55 L Pump flow rate: 10 L/min Pump pressure: 1.7 bar PNEUMATIC TAILSTOCK Quill taper: MT3 Outside diameter of quill: 45 mm Quill stroke: 70 mm Adjustable tailstock pressure: 25–260 daN Subject to errors or omissions, all technical details are provided without commitment. Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts checked and/or replaced Headstock Disassembly, parts cleaning, replacement of worn and defective parts, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. New paint. Turret Disassembly, cleaning, replacement of worn/defective parts. New paint and face resurfacing. Tailstock Disassembled, inspected, and serviced. New paint. Hydraulic and pneumatic circuits Disassembled, motor inspected, hoses, defective and worn parts replaced. X-Axis Disassembly, replacement of worn parts such as O-rings, seals, rings. New ball screw and new sliding block. Z-Axis Disassembly, replacement of worn parts such as O-rings, seals, rings. New ball screw and new sliding block. Electrical cabinet Complete inspection, various relays replaced. Paintwork Colors: White RAL 9003 and grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned Year: 2002

Condition: good (used), Year of construction: 1999, functionality: fully functional, CNC lathe tornado A90 after renovation in 2024 tool head VDI30 equipment bar feeder collet chuck on E173 Gedpfx Ahowavqxjvotw The machine is working can be seen in production

Condition: good (used), Year of construction: 1971, functionality: fully functional, machine/vehicle number: 12.02-37-31, grinding wheel width: 250 mm, grinding wheel diameter: 500 mm, grinding diameter: 125 mm, grinding length: 200 mm, type of input current: three-phase, overall weight: 5,000 kg, workpiece diameter (max.): 125 mm, nominal power: 28 kW (38.07 HP), The machine was used exclusively for grinding piston rods with a diameter of 10 mm. Gedpfsw E D Eusx Ahvjtw

Condition: excellent (used), Year of construction: 2005, Travels X-travel 559 mm Y-travel 635 mm Z-travel 559 mm Spindle Max. rated power 22.4 kW Max. speed 8100 rpm Max. torque 122.0 Nm 2000 rpm Drive system: Inline direct drive Taper: CT40 / BT 40 / HSK-A63 Bearing lubrication: Air/Oil Injection Cooling: Air-cooled Integrated 4th axis (B-axis) 90° rotation time (full 4th) 3.0 s Max. load capacity on clamping surface 400 kg Rotational torque (continuous) 575 Nm Backlash 30 arc-sec Gear ratio 106:1 Braking torque 3390 Nm Minimum resolution 0.001° Switching accuracy ± 15 arc-sec Repeatability 10 arc-sec Rapid traverse speed at B 150° sec Feed rate Max. feed for machining 21.2 m/min. Rapid traverse speed at X 35.6 m/min. Rapid traverse speed at Y 35.6 m/min. Rapid traverse speed at Z 35.6 m/min. Axis Drives Max. X Thrust 15035 N Max. Y Thrust 12500 N Max. Z Thrust 15035 N Tool Holder SK 40 Coolant Tank Capacity 360 L Tool Changer Capacity 30+1 Tools Max. Tool Diameter 64 mm Max. Tool Length 305 mm Max. Tool Weight: 5.4 kg Tool-to-Tool Change Time: 2.8 s Chip-to-Chip Change Time: 3.6 s Air Requirements Required Air Flow† 255 L/min. 6.9 bar Air Hose (inline) 1/2 in. Air Coupling 1/2 in. Minimum Air Pressure 6.9 bar Electrical Specifications Spindle Speed 8100 rpm Inline Direct-Drive Drive System Gtodpfowmmz Uox Ahvsw Spindle Power 22.4 kW AC Input Voltage (Three-Phase) – Low 220 VAC Full Load Current (Three-Phase) – Low 70 A AC Input Voltage (Three-Phase) – High* 440 VAC Full Load Current (Three-Phase) – High* 35 A * The "High" specifications refer to machines designed for higher input voltages. Dimensions Length x Width x Height 4800 x 2540 x 2840 mm Weight 7947 kg

Condition: used, Year of construction: 2008, Wagner WDE500 Lathe, Year 2008 Used lathe from Wagner Wagner WDE 500 cycle-controlled lathe Only approx. 1,700 operating hours Turning diameter: 500 mm Turning length: 1,500 mm Control: Siemens 802 C Swing diameter over cross slide: 280 mm Spindle bore diameter: 82 mm Number of controlled axes: 2 Speed range: 20-3,000 rpm Rapid traverse speed: 5 m/min Number of tool stations in turret: 1 Multifix "C" Tailstock: Yes, MT 5 Drive power: 7.5 kW Machine weight: approx. 3.0 t Dimensions (L x W x H): 3.3 x 1.7 x 1.7 m Cycle-controlled CNC lathe in good condition. Accessories: - Coolant system - Base holder - 3-jaw chuck Gtedpfx Ahexlz Rxevjw - Various PARAT tool holders With original operating manual Fully functional, good condition as shown in the photos Viewing, collection and delivery available for a fee

Condition: excellent (used), Year of construction: 2019, travel distance X-axis: 711 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 394 mm, spindle speed (max.): 15,000 rpm, spindle nose: BT 30, number of slots in tool magazine: 20, These are two identical Haas DT-2 machining centers equipped with automation. · Yaskawa GP-series industrial robot · Tray transport via robot · Parts handling for both items using a combination robot gripper · Machining: one workpiece per machine Gtodpjyg Dfiofx Ahvow Equipment: Through-spindle coolant (IKZ) Wireless probing system Chip conveyor Including automation

Year of construction: 2021, condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 3400 mm Measurements height 2100 mm Machine weight 5000 kg Control Unit Brand SIEMENS Model SINUMERIK 8287D Main Drive Spindle speed range 20 – 2200 Spindle motor power 15 kW Spindle bore 81 mm Number of axis 2 Movement X-Axis Movement 280 mm Z-Axis Movement 1435 mm Workpiece Workpiece drm over bed 500 mm Gsdpfxex D Nuvj Ahvotw Workpiece drm over support 260 mm Tail Stock Pinol diameter 75 mm Pinol tool taper MK 5 This Wagner WDE 500 PLUS was manufactured in 2021. It features a max turning diameter over bed of 500 mm and a spindle speed range up to 2200 rpm. Equipped with Siemens 828 B-T control for enhanced precision and a spindle motor power of 15 kW. Ideal for robust turning operations. Machine dimensions are 3400 × 1600 × 2100 mm, weighing approximately 5000 kg. For more information about this machine, please reach out to us. Application Types Turning

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, spindle speed (max.): 4,000 rpm, Haas TM-3HE CNC Milling Machine in great working order. The machine is currently in storage but can be powered up and demonstrated as required. The tooling shown in the pictures is included in the sale. Gsdpfxexnmzue Ahvstw