Machining center

Hüllhorst NUM 760

Condition: new, engine output 5 kW Djdpfewli Nrox Ac Neun saw-blade dia. 300-350 mm Working speed 0-40 m/min weight ca. 1.300 – 1.800 kg kg

Condition: used, Year of construction: 2009, Biesse Works Control Working range on X axis mm 3500 Working range on Y axis mm 1585 Working stroke in Z axis mm 350 N ° 2 work fields Bar worktop No. 8 adjustable bars N° 4 pneumatic Bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 4-axis vertical electrospindle (Vektor), with automatic tool change, HSK type cones 10-position rotary tool change system on the operating head 24-position chain tool change system - located on the rear of the chain machine Drilling head with vertical and horizontal spindles composed as follows: n. 12 vertical spindles in X n. 12 vertical spindles in Y n. 6 horizontal spindles in X n. 4 horizontal spindles in Y n. 1 independent blade for making X-grooves Front protection and safety system with carpets Perimeter protection grids Chip evacuation system with motorized belt Air conditioning system for cooling and cleaning of machine control Vacuum pump 250mc/h TECHNICAL DETAILS TO BE CHECKED Dodpfxew D Dhaj Ac Nsun

Condition: used, Year of construction: 2009, max. workpiece length 4500 mm profile spindle 1 Stück main drive 20 kW Control Siemens Weinig Conturex 2 C 114 ----- Working width: 40-260 mm Working height: 25-110 mm 2 x PowerGrip clamp tables, 2 x 2280 mm ----- Workpiece length 200 - 4,500 mm Workpieces over 2,700 mm in length are machined using a repositioning cycle. Main spindle 1: ----- Motor with brake 20 kW HSK 63F Electronically adjustable speed 2,000-18,000 rpm Maximum tool length from flat surface HSK 63 F: 290 mm With C-axis Tool magazine: ----- Number of pockets: 30 mm Pitch between pockets: 100 mm Permanently installed multi-spindle drilling head ----- For horizontal and vertical drilling and milling work without tool changes ----- Price ex-site Prices for Dujdpfxewunwye Ac Non disassembly and loading onto customer trucks Transport within Germany and abroad as well as reassembly Commissioning and, if required, new profiles are available upon request! Used tools included (drawings available upon request): ----- Wood: IV 68, 78, 88, opening inside and out, with hinged weatherboard Wood-aluminum: IV 68/68, 78/78, 87/68, 97/78 Lift-and-slide doors IV 68 and 78 Front doors IV 68 and 78 Pivot windows Corner connection: counter/dowel Technical specifications according to the manufacturer - no guarantee! Detailed technical description available upon request!

Condition: used, OKAMOTO ACC 52 DX SURFACE GRINDING MACHINE MAKE OKAMOTO, MADE IN SINGAPORE MODEL ACC 52 DX CONTROL AUTOMATIC TABLE SIZE 200 x 600 mm MAGNETIC CHUCK 200.0 x 500.0 mm ELECTRO MAGNETIC GRINDING WHEEL SIZE 205.0 x 19.0 x 50.0 mm TRAVERSES X AXIS: 650.0 mm Z AXIS: 230.0 mm DISTANCE GRINDING WHEEL TABLE 47.5 – 397.0 mm TOTAL POWER REQIUREMENT 2.25 kW MACHINE DIMENSIONS 2600 x 1600 x 1800 mm MACHINE WEIGHT 2,100 kgs PLUS DIAFORM WHEEL PROFILLING ATTACHMENT FAGOR DIGITAL READOUT VERTICAL HEIGHT READ OUT DISPLAY CROSS TRAVEL READ OUT DISPLAY Dedpfxsw Elu Rs Ac Neun AUTOMATIC DOWN FEED HYDRAULIC MOVEMENT COOLANT SYSTEM 200.0 x 500.0 mm FINE LOOP ELECTRO MAGNETIC CHUCK PAPER FILTRATION SYSTEM

Condition: good (used), Year of construction: 2007, functionality: fully functional, NC-controlled drilling and dowel-inserting machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions: Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: maximum length 600 mm Equipment: - Horizontal drilling unit with 3 individually selectable spindles, spindle pitch 32 mm Dusdpfx Ajxdl Raec Non - 1 dowel insertion unit (spaced 32 mm from the first drilling spindle) - Glue nozzle with adjustable glue output - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel sizes: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel feed 1. BASE MACHINE - Rigid welded steel frame construction - Axis travel in X, Y, and Z directions - Ball screw drives (Y- and Z-axis) and rack and pinion drive (X-axis) - Digital AC servo motor - Support table with left and right side stops and rear fence - Pneumatic center stop, manually actuated via selector switch - 6 overhead pneumatic clamps, manually adjustable - Centralized lubrication system power control PC85T Modern control system based on Windows PC

Condition: used, machine/vehicle number: 006906, X axis working area: 4175 mm Y axis working area: 1730 mm Working Table: Pod and Rail Main Electrospindle power: 18.5 KW Dujdpfx Ajwgktbjc Non Number of controlled axes: 4 axes Total number of drilling spindles: 20 Total number of tool changer positions: 18

Year of construction: 2008, condition: excellent (used), SAC CS40 Format Panel Saw year 2008 S/N 312029 Cutting length 3,200 mm Anodized aluminum sliding table 3200 x 420mm, locks for easy panel loading in any position steel gliding system Main saw arbor(30 mm) 45° tilting electric raise & lower of main blade. Main motor 5,5 kW, self-braking motor utting speeds 2,600 - 4,000 and 5,600 rpm Blade diameter max 400 mm max cutting height 130 mm ( 90° ) 100 mm ( 45° ) Dusdpjhwwlpjfx Ac Njn rip fence 1,500 mm scoring saw motor 0,75 kW 120 mm (Dia. scoring blade - 8,000 RPM scoring unit w/external adjustment ) Square crosscut fence with stops, extension table with miter fence & sliding outrigger support. 400 V , 50 Hz weight 820 Kg CE ,marked

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: Function tested Equipment and technical data: Milling unit: 4.4 kW Tool holder: HSK 63 F Speed: 1,000 - 18,000 rpm Water-cooled Tool changer: 4-position, lateral Drilling head: 9 vertical drilling spindles on a 32 mm pitch Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAM 32 Duedpfew I Ug Hjx Ac Njn Vacuum pump: 40 cbm/h Including vacuum suction cups Travel paths: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg The machine is completely checked for all mechanical, electrical, and electronic components and overhauled where necessary. All guides checked; console guides replaced New PC control system for the TWIN CAM control All axis modules checked and serviced Location: Flörsheim Availability: by arrangement

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 218, travel distance X-axis: 5,500 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 54 m/min, rapid traverse Z-axis: 38 m/min, controller manufacturer: OSAI, controller model: OPENkey, total height: 8,100 mm, total length: 5,100 mm, total width: 3,400 mm, spindle speed (min.): 3,000 rpm, spindle speed (max.): 24,000 rpm, spindle motor power: 7,400 W, number of spindles: 4, input voltage: 400 V, type of input current: three-phase, Equipment: CE marking, documentation/manual, We've lowered the price!!! NEW PRICE ONLY 130,000 EURO!!! This price is valid only until February 28, 2026! Don’t miss out! We invite you to purchase a NEW and outstanding 5-AXIS MACHINING CENTER from the renowned manufacturer FANUM. We are offering the latest SIGMA model, exceptionally well-equipped. The machine is completely new—please refer to the attached specification for details regarding its functions, technical parameters, and production capabilities. FANUM is recognized for its reliability, precision, high power, and rapid operation. The MACHINING CENTER we offer is BRAND NEW. It was purchased from FANUM Sp. z o.o. in 2021 and delivered directly to our facility by the manufacturer. The FANUM service team has only performed the commissioning; the machine has never been in operation. It is in absolutely NEW condition. Our model is exceptionally well-equipped, with practically every required feature. Currently, a new unit costs about EUR 282,350 net (approx. PLN 1,200,000 net). We have direct contact with and support from the manufacturer, FANUM Sp. z o.o. We can arrange another start-up inspection and demonstration at our location. Delivery to the new owner is possible, as is on-site installation and commissioning of the FANUM machine. The proposed price covers the machine itself; we can also provide a quotation including installation and commissioning at the new location. In our opinion, the discount we offer—over 40% (more than EUR 117,640 net, about PLN 500,000 net) off the new price—makes this an extremely attractive option for anyone seeking a similar solution for their production facility, or who never expected, within their budget, to acquire a modern, new, and highly efficient machining center. General information regarding the sales offer: • Although the machine is NEW, it was manufactured in 2021, and we do not provide any guarantee or warranty. • The device is non-returnable. • The advertised price does not include VAT (23% applies for buyers in Poland), which will be added to the invoice—please verify the indicated price. • Single owner. * Price in EUR calculated based on the NBP exchange rate – 1 EUR = 4.25 PLN. Duedpfx Aew E Hufjc Njn Welcome to all users of the MACHINESEEKER platform. We are new to MACHINESEEKER. We are not a furniture, manufacturing, or machinery trading company. We own a variety of properties in Poland and are a property developer specializing in residential projects in Warsaw (Poland’s capital city). The machines listed in the offer are our property. We have acquired them in settlements with our tenants from the furniture industry. We know their history and conditions, which match our descriptions. We are in contact with the machine manufacturers, who can provide additional support—Homag, Otto Martin, OMC Machinery, and FANUM. As we have no need for these machines, our prices are very attractive, especially given their practically new condition. We offer assistance with transport anywhere in Poland or the EU. You are welcome to inspect the machines prior to purchase. Best regards.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, CNC Woodworking Machining Center BACCI Double Jet Dusdpew Dndrjfx Ac Nen The machine is fully operational. Possibility to test the machine on-site. Technical Specifications: - Working area X: 2400 mm - Working area Y: 250 mm - Working area Z: 100 mm - Independent Z axes: 2 - Number of milling spindles: 2 - Main motor: 7.5 kW - Maximum spindle speed: 18,000 RPM - 5th axis: 5-axis spindle – yes - Machine table: special model - Special material clamping system: designed for chairs - Loading system: magazine - Software: BACCI PITAGORA - CE Certificate: ✔️ - Total connected power: 25 kW - Weight: 6500 kg