Hydraulic plate shears

hämmerle AS 10

Condition: used, mileage: 440,929 km, power: 120 kW (163.15 HP), first registration: 07/2016, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 06/2026, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 4,300 mm, loading space width: 1,780 mm, loading space height: 1,940 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, No. 38 – You can find this and many other Mercedes-Benz vans on our homepage: --- Djdpjxpz Sdefx Aa Eocd Mercedes-Benz Sprinter 316 CDI Maxi, with numerous extras. MOT (TÜV) valid until 06/2026. Last service at 432,--- Known defects: Engine warning light, coolant warning light, airbag warning light are active. Vehicle does not deliver full power. Oil present in coolant.--- Permissible total weight: 3,500 kg Emission class: EURO 5 Wheelbase: Maxi, 4,325 mm Cargo space (LxWxH in cm): 430 x 178 x 194 VIN: WDB9066351P291763 2 keys available--- Subject to error, changes, and prior sale. Special equipment: Audio system Audio 10, outside temperature display, overhead console with reading spot driver/passenger side, roof light in cargo area with door contact, 180 A alternator, rear doors (opening angle 270 degrees), wooden floor in cargo area, steering wheel (mechanically adjustable steering column), cross member with integrated step, smoker package, spare wheel in road-going condition, spare wheel carrier under rear frame incl. jack, cab seats: double passenger seat, cab seats: comfort driver's seat, rear stabilizer, reinforced front stabilizer, sidewall cladding in load/passenger compartment: plywood. Other equipment: 3rd brake light, adaptive brake light, driver's airbag, washer fluid level indicator, exterior mirrors electrically adjustable and heated (both sides), exterior mirrors with integrated turn indicators, battery 74 Ah, brake assist, brake system with ABS + ASR, roof lining in driver's cab, lockable glove compartment, body/structure: high-roof panel van standard, child safety locks, fuel tank: main tank 75 liters, full partition in cargo area, cargo securing/tie-down points, headlight range adjustment, model update, engine 2.1 liter – 120 kW CDI CAT, wheelbase 4,325 mm, low emissions according to Euro 5, right sliding door in load/passenger area, driver's seat belt system with warning device, seat cover/upholstery: Lima fabric, 6.5x16 steel wheels, service interval display Assyst, heat-insulating glazing, permissible total weight 3.5 t.

Condition: used, Year of construction: 2003, pressing force: 260 t, Hydraulic press brake Manufacturer: HACO Type: ERMS 60-260 Year of manufacture: 2003 Technical specifications Dodpfx Aaewkttre Escd Manufacturer: HACO Type: ERMS 60-260 Year of manufacture: 2003 Pressure capacity: 260 t Bending length: 6000 mm Dimensions (L x W x H): approx. L 7.0 x W 2.0 x H 3.70 m Weight: approx. 31 t Equipment • ATS 560 digital control system • Fiessler light barrier at the front • Centrally adjustable crowning • Amada tool system • Controlled axes: Y1, Y2, X • Manual R-axis • 1 set of upper tools • 1 set of lower tools All information is subject to change. A demonstration is available at any time in the exhibition hall.

Condition: new, functionality: fully functional, Year of construction: 2025, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. Dcjdsrq D Nijpfx Aa Esd The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Dodpfov Tk Exex Aa Eecd Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l

Condition: reconditioned (used), functionality: fully functional, LVD 4000 x 200T Press Brake Type PPBL 200/40 Dcjdpjwtmi Eofx Aa Eed Capacity 4000 x 200T Maximum stroke 150 mm Weight 13.5T With mobile blade rack

Condition: used, Year of construction: 1973, pressure 200 t chamfer lenght 3600 mm distance between columns 2650 mm dayligth 500 mm throat 300 mm stroke 250 mm working feed 10,5 mm/sec return speed 100 mm/sec ram stroke speed 150 mm/sec table height 900 mm oil volume 500 l total power requirement 37 kW weight of the machine ca. 17800 kg dimensions of the machine ca. 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions Dcodpfx Aaot I D U Eo Eed

Condition: used, Year of construction: 1986, Used 4-meter conventional press brake Type: PPH 40160 Dedpfx Aswc Nl Ioa Ejcd Capacity: 4100 x 160 ton Electric rear axle adjustment Electric depth adjustment 1 set of tools

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm Dcjdpfju Rni Hjx Aa Ejd cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Condition: repair required (used), Year of construction: 2015, Manufacturer Haco Machine No. HSLX 3006 Description Hydraulic Shears Replacement Blades Type: HSLX 3006 Manufacturer: Haco Year: 2015 Control: SC 100 Graphic touchscreen Automatic adjustment of cutting gap and cutting angle Programmable cutting length Djdpfet Rh Diox Aa Ejcd Memory capacity: 500 programs The machine is in good condition and fully operational. The Haco HSLX 3006 is a hydraulic guillotine shear, a machine used in metalworking for cutting sheet metal with precision. These machines are commonly used in various industries, including metal processing and manufacturing. Here are some possible specifications and features of the Haco HSLX 3006 1. Cutting capacity: The "3006" in the model name typically refers to the shear's maximum cutting capacity. In this case, the shear may be capable of cutting materials up to 3 mm thick and 6,000 mm (or 6 meters) long. 2. Hydraulic Operation: Guillotine shears like the Haco HSLX 3006 are powered by hydraulic systems that provide the power required to cut through metal. 3. Precision Cutting: These machines are known for their accuracy and precision, making them suitable for various cutting tasks in metalworking. 4. Backgauge: Many guillotine shears are equipped with a backgauge system that enables accurate and repeatable cuts by controlling the position of the workpiece. 5. Safety Features: Guillotine shears are equipped with safety features to protect the operator, including guards and emergency stop mechanisms. The guillotine shear has been dismantled for 4 years and is stored in a closed warehouse. It also comes with a new set of blades. Unfortunately, the computer/control unit is missing. According to the manufacturer, this will cost €4,000. We would be happy to organize transport for you and also take care of proper loading. The system is open for inspection; it is located in the city of Ptuj, Slovenia.

Condition: good (used), Year of construction: 1989, machine/vehicle number: 51756, Offer 25200 Dedpfx Ajwvipgea Eocd Technical data: - Press force: 200 t - Working width: 3100 mm - Distance between uprights: 2600 mm - Table width: 180 mm - Throat depth: 300 mm - Installation height: 450 mm - Approach speed: 80 mm/sec - Working speed: 9 mm/sec - Return speed: 60 mm/sec - Ram stroke: 120 mm - Adjustment range of fixed stops: 120 mm - Drive: 400 V / 18.7 kW - Space requirement approx.: W 3300 x H 2950 x D 1900 mm - Weight approx.: 10,500 kg - Equipped with: - Adjustment of press depth and pressing force - Motorized back gauge with handwheel for fine adjustment - 4-way universal die, pointed tool - Two-hand control panel, foot switch,