CNC turning and milling center

GRAZIANO CTX 310

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Working Area Max swing diameter over bed: 500 mm Swing diameter over cross slide X: 375 mm Max turning diameter: 246 mm Max turning length: 445 mm Chuck diameter: 210 mm Bar capacity: 65 mm Cross travel (X): 213 mm Longitudinal travel (Z): 450 mm Feeds Rapid traverse X/Z: 24 / 30 m/min Main Spindle Spindle nose (flat flange): 140 h5 mm Front bearing inner diameter: 100 mm Spindle motor power (40/100% ED): 16 / 12 kW Torque (40/100% ED): 153 / 115 Nm Spindle speed: 25–6000 rpm Tool Turret Number of tool stations: 12 Motorized stations: 12 Shank diameter (DIN 69880): 30 mm Motor power (40% ED): 9 kW Max torque (40% ED): 20 Nm Max speed: 4500 rpm Tailstock Automatic tailstock travel: 450 mm Center taper: MT 4 Max tailstock thrust: 400 daN Year of construction: 2008 Machine equipment: Fpodpfx Afexz E Uyjneb • Chip conveyor • Preparation for fume extractor • Various fixed and driven tool holders • Instruction manuals

Condition: good (used), Year of construction: 2002, Machine is in good working condition. Fjdpfxjxbqnxo Afnepb Parts shown by hand not come.

Year of construction: 2018, condition: ready for operation (used), A gear flank grinding machine Reishauer, completely overhauled by Burri Werkzeugmaschinen, is available. Grinding spindle speed: 3500rpm, cutting speed: 63m/s, max. gear diameter: 360mm, module range: 0.1-7, number of teeth: 6-600, max. workpiece height: 160mm, max. helix angle: +/-45°, max. workpiece weight: approx. 60kg. Min. wheel root circle diameter: 250mm, grinding wheel dimensions X/Y/Z: 350mm/104mm/160mm, grinding worm diameter range: 270mm-350mm, max. grinding width: 175mm, max. workpiece speed: 800rpm. Includes profiling devices, balancing device, structure-borne noise contact control, compact filter system, cooling unit, cooling water recooler, robot automation, and transport trolleys. Documentation available. An on-site inspection is possible. Fsdpfew Rqwajx Afnepb

Condition: excellent (used), Year of construction: 1977, grinding diameter 350 mm grinding length 1000 mm centre height 100 mm grinding wheel diameter 360 mm Fsdpfx Ajunt Eyofnopb total power requirement kW weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 1,3 x 1,5 m Machine in very nice condition, external + internal spindle, many accessories.

Condition: ready for operation (used), Year of construction: 2001, CNC milling machine TOS TV-1000 A CONTUR Manufacturer: Trens Model: MC 100 VA Year of construction: 2001 Condition: used Control unit: Heidenhain TNC 426 Fsdpfx Afohlp Iwjnspb X-axis travel: 1000mm Y-axis travel: 600mm Z-axis travel: 760mm Table length: 1080mm Table width: 580mm Tool changer with 40 positions Tool holder according to ISO 40 Spindle speed: 8000 rpm Overall dimensions: L 3200 x W 2100 x H 2900 mm Weight: 6200 kg Shipping possible throughout Germany and Austria. Surcharge 1000 € Sale excluding warranty.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Milling Machining Center - Vertical / Brand: DECKEL MAHO / Type: DMC 63V / Year of construction: 1999 The machine can be inspected by appointment under power. Well-maintained and very good functional condition. Spindle replacement: 18.03.2022 Spindle hours (03/13/2025): 51.206 h The machine has a Lehmann A-axis and counter bearing (as new). TECHNICAL DATA: Working area: - X-axis: 630 mm Fsdpfxov Nxbye Afnepb - Y-axis: 500 mm - Z-axis: 500 mm Feed/axis drives: - Advancing force X, Y, Z (100 % ED): 6.000 N - Feed rate: 0 - 30.000 mm/min - Rapid feed X, Y, Z: 30 m/min - Diameter ball screw/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z-axis to VDI/DGQ 3441: 0,015/0,010 mm (indirect/direct measuring system) Distance measuring system: - Input unit: 0,001 mm Working spindle: - Drive power (40/100 % ED): 13/9 kW - Torque (40/100 % ED): 83/57 Nm - Speed range: 1 - 10.000 rpm - Tool holder DIN 69 871-A: SK40 - Tool clamping force: 12.000 N Tool magazine: - Tool changing system: Pick-up - Number of magazine positions: 24 - max. Tool-Ø with vacant neighboring spaces: 80/140 mm - max. Tool length: 300 mm - max. Tool weight: 7 kg - Chip-to-chip time: 6,5 sec - Rotational speed/tool magazine: 47 rpm - max. Maximum loading weight of the tool magazine (24 x 3 kg): 72 kg Machine/Working table: - Clamping surface with T-slots DIN 650-14: 800 x 500 mm - Table load (set-up weight): 500 kg - Loading height: 850 mm - max. Workpiece height (at max. tool length): 240 mm EQUIPMENT: - CNC-Control: Siemens 810D powerline - Lehmann A-axis and counter bearing (as new) - Direct measuring system - Internal cooling through the spindle, 15 bar - Coolant system (emulsion) - Electronic hand wheel - Chip conveyor - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: like new (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 61373, IT IS IN WORKING CONDITION Fpedpfxjvwlf Is Afnjb

Condition: used, Year of construction: 2004, Technical data: Main spindle: Max. turning diameter: 33 mm Fpsdpstzyx Tofx Afnob Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Slide travel Z1: 320 mm Slide travel X1: 50 mm Slide travel Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools stationary with tool shank 16 x 16: 5 pieces Slide 2: Slide travel X2: 165 mm Slide path Z2: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine - 5-pos. tool carrier plate for slide 1 - Electrical interface and software for bar loading magazine - Collet chuck holder for main and pick-up spindle - 2 Double drill holder for rear machining support with cylinder - Pick-up spindle workpiece pusher

Condition: refurbished (used), For Sale: EOS P395 – Guaranteed Working Condition This EOS P395 is fully inspected and revised by Inframotion 3D (IM3D) to ensure top performance. Equipped with a reliable Synrad CO2 laser, this machine is ideal for efficient SLS production. Included in the package: • 2 build frames • Water cooler Materials Highlight We offer a range of plug-and-play materials that are fully tested and optimized for use with EOS systems. Our Inframotion PA12 provides exceptional performance and offers significant cost savings compared to OEM powders. By switching to our materials, you can lower production costs without sacrificing quality or reliability. Services Included: • Transport & Installation: We ensure safe delivery in the original EOS packaging and provide professional installation. Fedpfx Afsq E I A Djnepb • Warranty & Maintenance Plans: Flexible options are available to meet your needs. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines and provide comprehensive support. As the only provider offering a complete solution for used EOS equipment, we deliver unmatched expertise and reliability. What we offer: • Expert service: Installation, maintenance, repairs, and upgrades by skilled ex-EOS technicians. • Exclusive materials: High-quality consumables like our plug-and-play PA12, tested and optimized for EOS systems, offering significant cost savings. • Complete support: From transport to tailored maintenance plans, we handle everything. Trust IM3D for dependable machines, premium materials, and the expertise to optimize your SLS production. Contact us today for more information or specific inquiries!

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Reishauer RZ 362A with approx. 60 sets of diamond wheels Grinding worm dimensions: Min/Max. outside diameter: 280/350 mm Width: 84/104 mm Fsdpfx Afexb Ufuonjpb Max. module with restrictions: MOD 8.0 (DP 3.2) Number of starts: with restrictions up to 3 Max. usable width (axial shift): 90 mm For detailed technical information, please refer to the attached PDF file. Accessories: Dressing device Approx. 60 sets of diamond wheels Grinding stones Turbo separator