CNC Lathe

GILDEMEISTER NEF CT 40

Condition: like new (used), Year of construction: 2013, operating hours: 7,100 h, functionality: fully functional, turning length: 650 mm, turning diameter over cross slide: 350 mm, turning diameter: 385 mm, spindle speed (min.): 4,500 rpm, spindle bore: 67 mm, travel distance X-axis: 255 mm, travel distance Z-axis: 800 mm, For sale: Used DMG NEF400 V3, 5th Generation ISM 2-axis universal lathe with C-axis. Travel distances: X: 255mm Z: 800mm Swing over bed: 385mm Swing diameter: 350mm Turning length: 650mm Equipment: - Main spindle as integrated spindle motor - Max. spindle speed: 4,500 rpm - Drive power: 8.0/11.5 kW (100/40% duty cycle) Gbedpfsxzqnrox Agbeg - 12-position VDI30 disc-type turret with 6 driven positions - C-axis and spindle brake (hydraulic) - Automatic tailstock, MK4 mounting, travel: 680mm - CNC control Siemens 840D Solutionline with ERGOline Control, Sinumerik Operate, and ShopTurn 3G - Operating system: Linux - Technology cycle for applying alternating spindle speeds for vibration-critical setups - Manual tool measurement device in work area - Hydraulic unit - Coolant spray gun - Mechanical oil mist separator - Reinforced coolant pump: 12 bar, 23 l/min - Chip conveyor with discharge height of 1,250mm, discharging to the right Bar machining package consisting of: - Workpiece pickup unit with left-side conveyor for parts up to max. 65mm diameter, 150mm length, and 3kg max. weight - Bar clamping device inner draw-tube diameter max.: 67mm - Interface for bar loader magazine - Foot switch for tailstock operation - Hydraulic 3-jaw chuck SMW-AUTOBLOK - RMS sensor (Relocation Machine Security) Machine available immediately! Machine ready for operation! Loading by us included! Transport can be arranged upon request!

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller model: HASS, table width: 914 mm, table length: 2,134 mm, table load: 1,800 kg, overall weight: 11,340 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 7,500 rpm, coolant supply: 15 bar, distance table center to spindle nose: 864 mm, spindle motor power: 22 W, spindle nose: ISO 40, number of slots in tool magazine: 40, tool length: 406 mm, tool diameter: 63 mm, tool weight: 5,500 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​vertical machining center with HAAS CNC Gbjdpswrfamjfx Agbsg

Condition: good (used), Year of construction: 2019, Machine has 1500 spindle hours DMG Mori CLX 350 V 4, year of manufacture 2019, control DMG Mori Slim Line / Siemens Shoptrun, travel X/Z 185/540 mm, Y-axis travel 80 mm, 12-position turret, live tooling, C axis, Tooleye tool measurement, three-jaw chuck KNCS 225/66, collet chuck, VDI 30 tool holder, high-pressure cooling 12 bar, tailstock, Gsdsxy Hyzopfx Agbebg chip conveyor, prepared for bar feeder,

Condition: excellent (used), Year of construction: 2020, Two machines of the same type with automation (linked) HAAS control system Travel paths X/Y/Z: 711 / 406 / 394 mm Spindle speed 12,000 rpm Tool magazine for 20 tools, BT 30 4th axis HRT 210 with counter bearing Gbedpfx Asv Iypcegbeg Spiral conveyor Schusta automation with YASKAWA robot

Condition: excellent (used), Year of construction: 2022, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 1192524, 5-axis machining center Haas UMC-1250SS Gbjdpfx Agsv Hff Hjbsg SK40 mounting

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Gbodpsvr Eh Esfx Agbeg Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 17.5 [kW] - Spindle speeds : 18.000 [rpm] LINEAR AXES Gbsdpsup Hwxefx Agbjg - Travels on X/Y/Z axes : 915 / 500 / 500 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 20 [m/min] TOOL CHANGER - Tool magazine capacity : 28 TABLE - Table dimensions : Ø 630 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3620 x 3160 [mm] - Machine height : 3000 [mm] - Machine weight : 7300 [kg] MACHINE HOURS - Number of working hours : 50223 [h] EQUIPMENT - CNC : Heidenhain iTNC 530 - Coolant tank - Chips conveyor - Oil mist extractor : ELBARON - Cooling unit : HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe : Renishaw - Tool breakage detection : BLUM

Condition: used, Year of construction: 2006, 2006 Hurco VM1 Vertical Machining Centre YOM: 2006 Technical Information – Hurco VM1 VMC General Data Measurements width: 1800 mm Measurements depth: 1900 mm Measurements height: 2600 mm Machine weight: 2700 kg Main drive Number of spindles: 1 Spindle speed range: 40-8000 1/min Spindle motor power: 11 kW Movement Gbsdpfx Agov Suwiobjg X-AXIS Movement: 660 mm X-AXIS Working Feed: 8 m X-AXIS Rapid traverse: 20 m X-AXIS Accuracy: 0.005 Y-AXIS Movement: 350 mm Y-AXIS Working Feed: 8 m Y-AXIS Rapid traverse: 20 m Y-AXIS Accuracy: 0.005 Z-AXIS Movement: 450 mm Z-AXIS Working Feed: 8 m Z-AXIS Rapid traverse: 20 m Z-AXIS Accuracy: 0.005 Workpiece Workpiece weight: 350 kg Table Outer length: 762 mm Outer width: 356 mm Delivery & Siting available at extra charge – Please ask for price.

Condition: used, Year of construction: 2010, Milling machines Travel distance X: 760 mm Travel distance Y :510 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center Control: Hurco WinMax spindle chuck: SK - A40 spindle revolutions: 12000 rpm table size X: 1020 mm table size Y: 508 mm max. workpiece weight: 1350 kg tool changer: 24 - time input Power : 13,5 kW Torque: 214 Nm Rapid traverse: 35 m/min spindle cooling Godpfx Agjv D U Apjbjbg chip conveyor

Year of construction: 2004, condition: excellent (used), The Multivac R230 packaging machine is an advanced machine used mainly in the food industry for packaging a variety of products such as meat, cheese, seafood, delicatessen and many others. This machine is designed to create thermoformed packages, using vacuum to maintain the freshness and quality of the packed products. Equipped with a Busch RA 0100B vacuum pump and constructed of stainless steel, the Multivac R230 is designed to work with a film width of 320mm and has features such as various forming and cutting configurations. Its use is common in many branches of the food industry, from bakeries to meat and fish processing. Gbsdpsvzt Hujfx Agbsg