Double-column hydraulic press

Gigant G2-1200/2

Condition: as good as new (ex-display), Year of construction: 2025, CMS Taktika Vertical cnc working center for Glas Bearbeitungsmaße: Max. Glas-Length: 3.100 mm Nsdswd Ichspfx Ahvscn Max. Glas-height: 2.000 mm Min. Glas-length: 320 mm Min. Glas-height: 220 mm Thickness: 4-15 mm Options: - 2x groups of suction cups which 2 suction cups on each group - 2x Elektrospindle 6 kW 0-12.000 U/Min - Tool Magazin with 12 slots - Additional drilling from the backside - CAD/CAM - central lubrification

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm Ncsdpsvut Dyjfx Ahvsn stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry. Nsdpfjw U N Ixjx Ahvjcn

Condition: excellent (used), Manufacturer: ROVETTA Model: S4-600 Year: 2002 Condition: Used Stock number: 0363-0364-0365-0366 Pressing force: 800 tons Number of connecting rods: 4 Drive mechanism: LINK DRIVE Ram stroke: 900 mm Ram adjustment: 500 mm Ram dimensions: 4,500 x 2,300 mm Njdpfxjw Hci Ij Ahvocn Table dimensions: 4,500 x 2,300 mm Lateral opening in frame: 2,450 mm Usable front passage: 4,500 mm Die space at BDC: max. 1,500 mm, min. 1,000 mm Hydraulic safety device: Present Side removable carriage: Present

Condition: used, Year of construction: 1970, pressure 1000 t distance between columns 5000 mm stroke 500 mm Height of centres 400 mm Overall size 6000 x 2500 mm Ncsdpfxowwl R As Ahven Weight 1000 kg Distance between centres 3500 mm weight of the machine ca. 220 t

Condition: used, Year of construction: 2020, functionality: unexamined, total height: 6,400 mm, total width: 4,500 mm, total length: 3,800 mm, operating speed: 110 mm/s, reverse speed: 180 mm/s, distance table to ram: 1,500 mm, We are offering here a new build of the machine shown. The machine was put into operation in 2020 and can be inspected by the customer. Technical data: Press force T 800 Opening force T 80 Motor power KW 55/75 + 55/75 Piston stroke 1000mm Rapid pre-fill speed mm/s 110 Working speed mm/s 6 Return speed mm/s 180 Guide diameter mm 250 Max pressure Bar 250 Useful table area mm 3,500 x 2,000 Lower table displacement mm 2000 Between columns mm 2,000 Open height mm 1500 Total front mm 3800 Total side mm 4500 Total height mm 6400 Weight kg 134,600 The MV-800E/NC-SINCRO press was specially developed for the adjustment and testing of molds, dies, and stamps. The 4 columns with 250 mm diameter made of C45E steel were specially manufactured for high stress. It features an optimized hydraulic system with a pressure of up to 250 bar, ensuring long service life and reliability. It meets all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLE • A structure that withstands 600 T concentrated force on 1/3 of its surface. • Lower table with T-slots. • Upper table with T-slots. • Usable table surface: 3,000 x 2,000 mm. CYLINDER AND HYDRAULIC UNIT • Two double-acting hydraulic cylinders with 400 T each. • Single-stage hydraulic unit with automatic shutoff of pre-fill speed and independent operation, equipped with a decompression system and proportional pressure pre-fill valves. Equipped with digital potentiometers on the upper table for displacement control and an electronic synchronization system to compensate for off-center or unbalanced forces. • The press is equipped with a side pressure switch to regulate the most suitable pressure setting for each specific task. • Glycerin manometer with tonnage display. ELECTRICAL INSTALLATION AND SAFETY • Electrical installation for operation with 1 or 2 speeds of the main cylinder feed. • The press has a manual cycle and an automatic cycle (activated via a test button selector): • The manual cycle allows the execution of all movements (step by step) of the press at slow speed. • The automatic cycle allows the press to perform a complete production cycle. • Electrical safety system for the upper table fall protection system. • Lower table with hydraulic removal and physical stops. • The machine features a control panel with a touchscreen display for entering operating and calibration data. • 2 optical barriers of 1,000 mm with safety level IV installed at the front and rear. • Electrical components from Siemens are manufactured according to applicable CE regulations and laws in protection class IP55. • Electrical and hydraulic functions are redundant and self-controlled. Includes an additional safety block and self-monitoring devices for operation and safety. Includes inspection and certification of correct operation and safety distance for light barriers. Ncsdpfjwlrv Uex Ahven • Safety is ensured by a laser and area protection with light barriers of level IV.

Year of construction: 1988, condition: used, Glass edge grinding machine Knopp Typ 02-01 Bauj 11/88 Ncedpfsikn D Njx Ahvjn

Condition: excellent (used), Year of construction: 2003, Manufacturer: ROVETTA Ncodpsxlh Rfofx Ahvjn Year: 2003 Condition: Used Stock number: 0385 Pressing force: 630 tons Number of connecting rods: 4 Slide stroke: 300 mm Slide adjustment: 250 mm Die clearance at BDC: 950 mm Strokes per minute: 15/65 Maximum front opening: 5,200 mm Table dimensions: 5,000 x 2,630 mm Slide dimensions: 5,000 x 2,630 mm Main motor power: 132 kW

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total height: 6,000 mm, installation height: 1,000 mm, total width: 2,400 mm, total length: 3,500 mm, pressing force: 500 t, table width: 1,500 mm, table length: 2,000 mm, overall weight: 45,000 kg, oil tank capacity: 1,200 l, Equipment: safety light barrier, HIDROLIKSAN HCFP – 500-t Hydraulic Tryout / Toolmaking Press for Tool and Forming Technology The machine is a tryout/tool tryout press designed for tooling in the fields of forming, deep drawing, and toolmaking. It is fully operational, ready for use, and can be inspected and tested under power. The press features a robust 4-column design, a spacious working area, and a hydraulic unit equipped with REXROTH pump technology. Control is managed via a SIEMENS S7-1200 with touch panel and extensive parameterization options. Scope of Delivery & Accessories - GÜTHLE tool sliding and lifting ball system - Hydraulic foot pedal (GÜTHLE) - Roll stand / support console 10 t (GÜTHLE) - 4-channel tool holder system (length 1500 mm, 2 t per channel) - Complete REXROTH hydraulic unit - Air cooler - Foundation plans / manufacturer documentation Condition of the Machine - Fully functional - Hydraulic system leak-free and runs smoothly - Controls & electricals in good condition - Mechanically sound, no visible damage - The machine is assembled and can be demonstrated under power. Press Force: - Rated force: 500 t - Max press force at 250 bar: approx. 510 t Dimensions & Weight: - Overall dimensions (approx.): 3500 × 2400 × 6000 mm - Total weight: approx. 45,000 kg Working Area: - Table size: 2000 × 1500 mm - Internal column spacing: 2000 × 900 mm - Installation height: 1000 mm - Stroke: 800 mm (linearly adjustable via linear measuring system) - T-slots (mounting defined by the customer) Hydraulic System: Main Cylinders: - Quantity: 2 - Piston Ø: 340 mm - Rod Ø: 280 mm Auxiliary/Plan Cylinders: - Quantity: 2 - Piston Ø: 120 mm - Rod Ø: 70 mm Die Cushion: - Force: 150 t - Cylinders: 2 × Ø 310 × 210 mm - Stroke: 400 mm Pumps and Tank: - Pump: REXROTH axial piston pump, 100 ccm, approx. 150 L/min - Hydraulic tank: 1200 L - Oil system: 1000 L capacity Speeds: - Approach stroke: 120 mm/s - Return stroke: 150 mm/s - Working/pressure stroke: 12 mm/s Control & Safety: Control: - SIEMENS S7-1200 + ET200S - 12" touch panel Schneider Electric Operating Modes: - Two-hand automatic - Setup mode - Single stroke - Stroke without die cushion - Deep drawing mode with die cushion Nsdpsx D Tv Djfx Ahvocn Measurement & Safety Features: - Linear measurement system Novatechnik (63 Bit) for slide and die cushion - SICK safety light curtains front and rear (height: 1050 mm) - Side safety fencing with limit switches - Remote maintenance via Ethernet possible - Mobile operator panel International Notice Block (DE/EN) German: Dismantling, deinstallation, loading and transport are exclusively the responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide equipment, personnel, or loading assistance. Collection only after prior appointment. English: Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide personnel, equipment, lifting devices or loading assistance. Pickup must be scheduled in advance. Sale is EXW (Incoterms 2020). Location: Saxony, Germany

Condition: used, Year of construction: 2011, operating hours: 1,000 h, functionality: fully functional, total height: 4,200 mm, table height: 700 mm, total width: 3,000 mm, total length: 2,000 mm, pressing force: 1,200 t, table width: 3,000 mm, table length: 2,000 mm, overall weight: 60,000 kg, ram plate width: 800 mm, ram plate length: 600 mm, distance table to ram: 700 mm, type of input current: three-phase, distance between stands: 2,200 mm, stroke length: 600 mm, oil tank capacity: 700 l, control cabinet width: 400 mm, input voltage: 380 V, control cabinet height: 2,000 mm, Equipment: safety light barrier, H-frame, 4 columns, daylight 700 mm, stroke 600 mm, distance between columns 2200 mm x 1260 mm, dimensions (LxWxH) 3000x2000x4200 mm, 380V-15kW, weight 60,000 kg Ncjdpfexn Rvcjx Ahvjn