Welding turn Table

Gieseking KT 600

Condition: good (used), Welding rotary table Gieseking, 600 Kg load capacity good condition speed infinitely variable approx. 0,01 to 1,5 rpm with foot remote control diameter 0,8 meter height horizontal 0,95 meter Ljdpfx Ajlamrzeg Rohp height tilted to center of plate 0,8 meter length 1,2 meter width 1,1 meter

Condition: used, Year of construction: 2013, Second hand automatic shape glass cutting table (jumbo), BOTTERO Type 352 BCS-J, Year 2013 Lsdowfhidjpfx Ag Rehp

Condition: new, Year of construction: 2024, load capacity: 300 kg, Equipment: foot remote control, rotational speed infinitely variable, Protec KT 300 H welding turntable, 170/400 special version Horizontal load 300 kg, tilted 150 kg Power consumption 220 V, 50 Hz Table diameter 450mm Lodpfsvbrqxox Ag Rshp Hollow shaft diameter 170mm Table height 500mm Welding current transmission 400 A Quick-action chuck diameter 300mm, surcharge 550.-€ Quick-action chuck diameter 400mm, surcharge 750.-€ Crank gear motor 0 - 90° stepless adjustment Infinitely variable speed 0.01 to approx. 5 rpm. incl. foot remote control Digital display with welding time limiter (if required)

Condition: good (used), Year of construction: 2012, •Euromac MTX Flex 12 1500/22/ 2500 •A lot of tools included. Ljdpfx Agjwk Ntue Rehp •Year of construction 2012 •Multitool 6 •Multitool 10 •CE Safety features •Table extensions for 4 meters •Vacuum system • X-axis 2500mm with positioning 10000mm •Y-axis 1500mm MTX flex 12 • 3 Autoindex stations D - 360° pragrammable • 3 Fixed stations D • 6 Fixed stations B with ACTIVE Die System • Direct DRIVE System •Automatic repositioning of the hydraulic plate clamps. • Standard 2 plate clamps • Simple system for loading plates. • Automatic lubrication of the multi-tool and tools • Movable control console • Machine software TPT (TOP PUNCH TOUCH) with 21.5 inch LED touch screen. • Table with brushes • Folding table at the front (L 850) • External cooling system • UPS system: protects the console PC against voltage drops and guarantees up to 30 minutes of power supply in the event of a power interruption. • Die holder 2 x D, 1 x C, 2 x and 1 x Adapter from B to A • Punch adapter: D/B, D/C, B/A. • Operating instructions (paper and electronic). • Preparation for online service (internet connection required). • USB memory stick. • Electrical preparation for the loading and unloading system.

Condition: new, Year of construction: 2024, Container turning device 10 tons lifting capacity Double drive Synkron Axle distance steplessly adjustable by means of thread Ljdpfxoifk Rbj Ag Rjhp speed infinitely variable with foot remote control diameter from 300mm to 3500mm Roll width and diameter 120 x 270mm Speed 200 - 1200 mm/min.

Condition: new, Year of construction: 2020, I - beam section - flat steel 80 x 15 (d600) mm I-beam section - upend 60 x 10 (d800) mm L-beam 45 x 5 (d600) mm bar material - diameter 35,0 (d700) mm tube diameter 60 x 2,0 (d1000) mm square material 45x45x3,0 mm total power requirement 2,25 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 780 x 950 x 1450 mm Ljdpfegvqvmex Ag Rjhp - higher speed 6.6m/min - l-steel flat 80x15 (d600)mm - l-steel on edge 60x10 (d800) mm - Angle steel 45x5 (d600) mm - Solid material Ø 35.0 (d700) mm - Pipe diameter max. 60x2.0 (d1000) mm - Square material 45x45x3.0 mm

Year of construction: 2022, condition: new, Technical data: - load capacity: 10.000 kg - Own weight: 850kg - Insertable workpiece diameter: 50 - 3500 mm - Roll diameter: 250mm - Roll width 160mm - turning speed approx. 100-2.000 mm/min - Two-pedal foot switch - Potentiometer for infinitely variable speed control Lhedjfxw H Aspfx Ag Rop

Condition: new, Year of construction: 2025, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: Ledpfx Aonfvx Njg Rohp - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: good (used), Year of construction: 2024, Welding turntable KT 300 Load horizontal 300 KG, tilted 150 KG Power consumption 220V, 50 Hz table diameter 450mm height 500mm Tilt range stepless via crank gear motor 0 - 90°. speed 0,3 - 2,5 rpm Incl. foot remote control Surcharge: Quick release - jaw chuck diameter 300mm, 450.-€ Lodpfxebvk I Ee Ag Rjhp

Condition: new, Year of construction: 2024, load capacity: 1,500 kg, Perforated table 1200 x 2400 x 200mm Thickness of the table top 20 mm, diameter of the holes 28 mm Swivel range 360° Height adjustment Hydraulic motor 800 to 1200mm Speed 0.5 rpm Motor power 0.75 KW Lsdpfx Ajr Uft Dog Rehp We offer the tables in many sizes and load capacities: Load capacity 500 Kg, dimensions 1000mm x 1500mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 1000 kg, dimensions 1000 mm x 2000 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 1500 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 2000 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 3000 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 5000 kg, dimensions 1500mm x 3000mm x 200mm, bore 28mm with manual or automatic height adjustment