Slip Grinding Machine

GERD WOLFF VKMK - Serie

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS250, total width: 1,100 mm, total height: 950 mm, overall weight: 350 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 190 mm, workpiece length (max.): 190 mm, Equipment: CE marking, ZCVS 250 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 250 liter volume (Capacity between 125lt to 1250lt is available up to request) * Highly wear resistant P.U.Lining (90 Shore) Ksdpfx Ansrkmv Sjuenc * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: *Colour in RAL 5003 & RAL 7001 *Epoxy paint is used to ensure long life of the paint.

Condition: used, Year of construction: 2008, Technical details: batch weight: - total volume: 600 l external diameter: 1716 mm Effective volume: 345 l Work tank width: 1616 mm max. workpiece size: 270 mm revolution per minute: 980 - 1460 U/min total power requirement: 6 kW weight of the machine ca.: 1600 kg dimension machine approx.LxWxH: 2,4 x 1,7 x 1,44 m height: 3,42 m This machine was never operated with abrasive grinding media and therefore shows very little wear. The polyurethane lining is in excellent condition. The Walther Trowal CB 600 offered for sale was used exclusively for the treatment of stamped metal parts. The parts were processed in a dry finishing process using corn cob granulate, whereby they were conveyed through the media. The purpose of this process was to condition the surface of the stamped parts in such a way that sticking together during subsequent stacking was reliably prevented. The machine was used exclusively for this application and operated only in dry mode with corn cob media. Walther Trowal CB 600 The Walther Trowal CB 600 is an industrial circular vibratory finishing machine with a gross capacity of 600 liters. Suitable for: ·Deburring ·Edge radiusing ·Grinding ·Surface smoothing ·Polishing ·Descaling ·Cleaning metal parts Typical workpieces: ·Turned parts ·Milled parts ·Stamped parts ·Cast parts ·Forged parts ·Gears Machine can be demonstrated under power. Ksdpfx Aezdnlasnujnc i.D. *

Year of construction: 2017, condition: ready for operation (used), A compact Walther Trowal vibratory finishing system is available. 1) Walther Trowal ZM 03-FL process water treatment system, Year of manufacture: 2017, Throughput: approx. 1000l/h, Drum capacity: 14l, Acceleration: 2012g, Wastewater tank: 300l, Process water tank: 150l, Compound savings: 90%, Water savings: 98%, Machine dimensions X/Y/Z: approx. 1400mm/1200mm/1750mm, Weight: approx. 600kg, Control system: PLC. 2) Walther Trowal MV 21 vibratory finishing machine, Year of manufacture: 2017, Max. usable capacity: 130l, Ceramic media/plastic media filling capacity: 230kg/150kg, Max. workpiece dimensions diagonal: 570mm, Speed: 3000rpm, Working bowl diameter: 616mm, Working bowl depth: 470mm, Machine dimensions X/Y/Z: approx. 1250mm/1050mm/1200mm, Weight: approx. 900kg, operating hours: approx. 913h. Documentation available. An on-site inspection is possible. Kodpszkldtsfx Anusnc

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20241202, total height: 860 mm, overall weight: 320 kg, total length: 1,170 mm, total width: 1,170 mm, type of input current: three-phase, tank capacity: 150 l, usable tank capacity: 100 l, input voltage: 400 V, workpiece width (max.): 170 mm, workpiece height (max.): 170 mm, outer diameter: 170 mm, workpiece length (max.): 170 mm, inner dimension width: 260 mm, power: 2.2 kW (2.99 HP), input frequency: 50 Hz, warranty duration: 12 months, load capacity: 60 kg, Equipment: rotational speed infinitely variable, The round vibrator Vibra-Line DK impresses with an open, curved container, which has a capacity of 150 liters. This model is equipped with an air-controlled automatic emptying system and a a sound-insulated lid, which ensures convenient and quiet operation. The U-shaped inner container has a 22 mm thick polyurethane (PU) coating, which ensures exceptional resistance to process wear. The capacity of 150 liters allows for approximately 50 to 100 liters of metal parts per load, depending on their shape and size. The wide drum and low discharge height make it much easier to unload the processed parts. The machine is controlled by a frequency converter with infinitely variable speed control, which is operated via a 5.5-inch touchscreen. Process times, languages and speeds can be adjusted quickly and easily. and speeds can be adjusted quickly and easily. The control system also controls two external connections, which can be used for process water and compound dosing. Kjdoviu Ehjpfx Anujnc The Vibra-Line 150DK circular vibrator is supplied as a plug-and-play solution and only requires a 16 amp CEE plug, 4 bar compressed air and a water connection for commissioning. a water connection for commissioning. Our devices comply with the EC machine/device directives and are supplied with manufacturer's declaration of conformity and CE mark.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Cutting capacity 90° round: ø250 mm Cutting capacity 90° rectangular: 280 x 220 mm Cutting capacity +45° round: ø230 mm Cutting capacity +45° rectangular: 220 x 200 mm Cutting capacity -45° round: ø200 mm Cutting capacity -45° rectangular: 200 x 140 mm Kedpjzi Ackofx Anuenc Cutting capacity +60° round: ø120 mm Cutting capacity +60° rectangular: 140 x 80 mm Miter range: -45° to +60° Saw blade: 2950 x 27 x 0.9 mm Blade speeds: 36/72 m/min Working table height: 285 mm Featured with: Semi-automatic band saw, Hydraulic clamping Country of origin: Italy Motor power: 1.5/1.8 kW Machine (L×W×H): 165 x 115 x 180 cm Machine weight: 475 kg

Condition: good (used), Year of construction: 2019, functionality: fully functional, Metal band saw EM BS 350 DGHF with base frame Knedpfewxad Tox Anuoc

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Sheet metal width: 2050 mm Kodpfjzbarnsx Anujnc Sheet metal thickness: 4 mm Stroke: 41 mm/min Table height: 850 mm Machine weight (approx.): 2,900 kg Dimensions: 2700 x 2200 x 1400 mm

Condition: defective spare-parts repository (used), Year of construction: 2000, functionality: limited functionality, Equipment: lighting, This machine has served us well in our workshop for a long time. Unfortunately, the electronics appear to be defective. Therefore, we had to purchase a new one. Knjdpsz Dgmmsfx Anujc Available for self-collection in Krostitz.

Condition: good (used), Year of construction: 2006, Boring power 35.0 / 40.0 mm bore capacity in cast iron 50.0 mm threading M 30 bore stroke 150 mm Size of table plate 730 x 210 mm Center of spindle to wall or column 280 mm Speed 80.0 - 1.400 U/min distance spindle /table 85 - 755 mm spindle taper MT 4 MK column diameter 120 mm feed 0.1 / 0.2 / 0.3 mm/U voltage 400 V Motor output 1.3 / 2.3 KW weight of the machine ca. 350 kg range L-W-H 800 x 600 x 2020 mm Original price, including accessories: approx. 20.000 euros Special price available upon request Knsdpfxjzl E Ubo Anuoc Features: - Heavy-duty, versatile column drill press - Electric table height adjustment - Cross slide 730 x 210 mm ... with digital display - Machined base plate with T-slots - Automatic spindle feed - Fixed drilling depth stop - Stepless speed adjustment - Pole-changing motor - Thread-cutting device - Quick-release drill chuck with tapered shank - User manual (PDF)

Condition: new, weight 1050 kg diameter 1550 mm height 1250 mm 0 845 l total power requirement 5,5 kW Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. This type of machine has a large sieve surface and allows easy separation of the workpieces from the grinding stones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump Knodpoyk Iigsfx Anuoc - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.