GEA F 114 milling machine

GEA F 114

Condition: excellent (used), SCM T150 Spindle Moulder Fsdpfx Adsw Ral Hj Iogd Spindle diameter: 35 mm Total spindle length: 180 mm Electric spindle lift Electric fence movement Electrically adjustable tilt angle -10/45° Variable spindle speed: 3000-4500-6000–7000-10000 rpm Motor power: 5.5 kW DTR technical documentation

Condition: used, Used machine Equipment and technical data: - Table size: 800 x 1000 mm - Diameter of the table opening: 480/380/170/125 mm - Taper of the milling spindle: MK 5 - Speed of the milling spindle: 3000 + 4500 + 6000 + 9000 rpm - Height adjustment range of the milling spindle: 150 mm - Distance from the center of the milling spindle to the front edge of the table: 400 mm - Largest permissible tool diameter: 250 mm - with wooden clamping jaws (can be replaced with metal clamping jaws upon request) - with Holz-Her 3-roller feed device - with heavy sliding table; runs on ball bearings on absolutely parallel-milled guide rails - Weight: approx. 800 kg Availability: short-term Fgjdpeyq T Ihofx Ad Iod Location: 63934 Röllbach

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x2070x1135 mm Fsdpovz E Siefx Ad Ijgd Weight 320 kg Total power requirement 2,2 kw

Condition: used, Year of construction: 1996, includes: 3-roller feed system, continuously adjustable control panel on top, table extensions with retractable support and emergency/off switch, swivel adjustment from -5° to +45° via handwheel, with dial gauges, right/left spindle rotation, spindle diameter 30 mm. Location: Nattheim. Fgodpfxoy Iddio Ad Ijd

Condition: good (used), Year of construction: 1979, Spindle diameter: 30 mm Speeds: 2,800 – 4,500 – 6,500 – 10,000 rpm Motor: 10 HP Table dimensions: 1,100 x 1,000 mm Extraction port diameter: 2 x 120 mm Tilting range: -5 to +45 degrees Max. spindle stroke: 130 mm Various tools available at an additional cost Includes 4-roller feed unit HOLZHER Type 1112 Each with 4 feed speeds forward and reverse Fodpfx Adexran Nj Isgd Custom-built table extension right & left With tools as shown in the picture

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine should have. A solid, cast iron grinding unit with a powerful motor ensures maximum sanding performance. The work table, which is height-adjustable by spring pressure, allows for optimal belt utilization and safe operation. Optionally, a belt oscillation, stepless unit swivel, veneer sanding device, and an additional table for sanding work on the idler roller can be retrofitted. Fgodjd R Ev Dspfx Ad Ijd The machine is supplied with a range of sanding belts; a miter and angle stop are also included in the scope of delivery. Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Sanding belt speed: 22 m/sec • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Dust extraction diameter: 100 mm Location: In stock at warehouse 54634 Bitburg - free for collection - Can be shipped for an additional fee.

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Standard Equipment and Accessories - Swiveling operator panel easily accessible for the operator, "eye-S 15" electronic control system. Includes: * 15" touchscreen monitor * Direct control of 6-8 axes with manual, semi-automatic, and automatic operating modes * Operator assistance with the option to manage 3 different points on the tool for accurate determination of the reference point (zero point) * Capability to store up to 1000 programs with associated images * Capability to store up to 1000 different tools with associated images * USB port * Ready for network connection - Operator aid on the electronic control, including: * Tool database management * Display of coordinates at 3 points on the tool for new reference (zero) point determination * Management of tool edge speed * Operator support for common machining tasks Fgedpfx Adsx Nbzus Isd - "Flex" milling fence with automatic adjustment via the electronic control system. Complete fence adjusted to tool diameter, infeed jaw for required chip removal. Movable "FLEX" fence from the worktable. - Aluminium fence jaw for the milling fence with inserts for continuous support - "Fast" table insert, manually adjustable, replaces table rings for optimal workpiece support surface - Electrical pre-wiring for a power feed unit - Spindle rotation direction: right/left - Automatic motor start - Version M-E includes: * Electrospindle with max. performance from 3,400 rpm * Electrospindle power 7.5 kW (10 HP) [S6 -40%] * Interchangeable MK5 spindle * Inverter for speeds from 900 to 12,000 rpm - Interchangeable MK5 milling spindle Safety/Protection - Milling guard, max. tool diameter 160 mm - Electronic motor brake effective even without mains power - Safety sensors during tool change for: spindle stop, spindle lock, opening/closing of tool holder - Electropneumatic spindle lock - Microsafety switch on machine door - Emergency stop button - Lockable main switch - Motor protection switch - Control circuit 24V - CE Declaration of Conformity - Frequency 50 Hz - Base - MACHINE LANGUAGE: German - Standard safety regulations - Manual device for feed support height adjustment according to workpiece thickness with mechanical digital display and horizontal adjustment according to tool diameter. Thanks to the operator panel column, this device allows the feed support to be swung away from the work table. - Voltage 400 V, EU - Quick tool clamping system "T-SET" Allows clamping/unclamping of tools via easy application with a compressed air gun. - L'invincibile TI 5 CE version - "LL" version worktable with two cast iron table extensions; total length 2500 mm, complete with extendable support rail for wide workpieces - Emergency stop switch - Milling spindle diameter 30 mm Availability: short-term

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Features and technical data: Table size: 2000 x 880 mm (table made entirely of cast iron) with extendable frame support Main motor: pole-changeable 5/6 kW Spindle speeds: 3000/4500/6000/9000 rpm Spindle height adjustment: 110 mm Spindle tilting: 45° Fsdpfx Adoy Ih Ths Isgd with Holz Her 3-roller power feed Availability: short term Location: 63934 Röllbach

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 The T 110 is the table saw from SCM, which optimally combines quality and an affordable purchase price. The construction is extremely stable. For convenient operation, all controls are arranged within easy reach on the front of the machine. Precise height adjustment of the tool is ensured by a mechanical display. Spindle inclination from -5 to +45 degrees. Table size: 1000 x 750 mm Fgjdpfxoy Ih Tus Ad Ied Spindle overhang: 140 mm Table overhang of the spindle: 20 mm Spindle speeds: 3000-4500-6000-9000-10000 rpm Max. diameter of the tool that can be lowered below the table: 320 x 40 mm Profiling tool max. 250 mm Motor: 4 kW Dust extraction port: 120 mm With a 3-roller feed system Weight: 520 kg Availability: short-term Location: Röllbach

Condition: good (used), Code: 0402 Brand: SCM Model: T 150 E - CE Standard Automatic electronic spindle moulder with tilting spindle, complete with feed, for joinery, furniture, custom-made furniture, wooden joinery, doors, timber structures, plastics and composite materials – CE Standard Electronic control for vertical positioning and spindle tilting Inverter: electronic speed variator with display from 1000 to 10000 rpm Reversible rotation Manually adjustable “FAST” sector work table Guide - router hood with easy release mechanism operated by a crank handle Fsdjzb Eqcepfx Ad Iogd Technical data: Work table dimensions 2500 x 800 mm Removable workpiece support Work table height from ground 935 mm Spindle tilting -10° to +45° Spindle diameter 40 mm Max profiling tool diameter 250 mm Max tenoning tool diameter 300 mm Main motor 7,5 Hp Feed roller support device with manual vertical and horizontal movement 3-roller automatic feed MAGGI N° 2 suction inlets diameter 120 mm Overall dimensions mm 2500 x 1350 x 1900 m Weight kg 1000