End mill

Garant EQ 753200

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,474 h, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 356 mm, controller manufacturer: HAAS, table load: 227 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis HAAS Mini Mill 2 was manufactured in 2012. It features an X-axis travel of 508 mm, Y-axis travel of 406 mm, and Z-axis travel of 356 mm. The machine includes a table size of 1,016 × 356 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Mini Mill 2 vertical machining centre we have for sale. Contact us for further details. • Table: • Size: 1,016 × 356 mm • T-slots: 3 × 16 mm • T-slot spacing: approx. 110 mm • Feed rates: Fgedpfx Akjzbh U Devsf • Max cutting feed: 12.7 m/min • Rapid traverse: 15.2 m/min • Electrical: • Power supply: 360–480 V / 3 Ph / 50–60 Hz Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2021, operating hours: 4,236 h, functionality: fully functional, travel distance X-axis: 625 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: FANUC, controller model: FANUC 31i-MB5, workpiece height (max.): 450 mm, workpiece diameter (max.): 550 mm, workpiece weight (max.): 400 kg, total height: 2,900 mm, total length: 3,400 mm, total width: 2,700 mm, table load: 400 kg, rotary table diameter: 500 mm, overall weight: 7,500 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 2,102 h, coolant supply: 70 bar, distance table center to spindle nose: 550 mm, spindle motor power: 11 W, spindle nose: ISO 40, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 75 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Used 5-axis vertical machining center with FANUC CNC, optical scales on the x-y-z axes, 60-place tool magazine and 70 bar pump and TS27R tool pressure probe + MP60 probe Fedpezfp U Ejfx Akvogf

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Center height 230 mm Center distance 1500 mm Swing diameter over bed 465 mm Swing diameter over cross slide 270 mm Swing diameter in bed bridge 690 mm Bed bridge length 240 mm Spindle bore diameter 58 mm Fgodpfx Akey Duy Hsvof Spindle head CAMLOCK D1-6 Spindle bore taper Morse 6 Speed ​​range 25 – 2000 rpm (12 speeds) Tailstock taper Morse 4 Tailstock sleeve travel 128 mm Motor power 5.5 kW Machine weight 1720 kgs Machine dimensions: 2700 x 1080 x 1370 mm Accessories - 3-axis DRO system - 3-jaw chuck - 4-jaw independent chuck - Faceplate - Steady rest - Traveling rest - Wrenches - Cooling water equipment - MULTIFIX knife holder with inserts - Tool case - Tools, wrenches - Cutting tools - Manuals and CD The lathe is in near-new condition and has hardly been used. It is powered up in our workshop.

Condition: good (used), Parts on table not come. Marked with red. Fgodpfx Akewxdyxsvof

Condition: excellent (used), Year of construction: 2011, *The video is just an example of how this cell can be prepared. Grinding cell with Kuka KR 180 grinding robot Berger grinding cell 2012 (external grinding A1) - Total weight approx. 6300 kg - Cell dimensions: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of manufacture 2011 - KRC 4 controller - Additional axis (7th axis) Fsdpfx Asg Saqvjkvegf BSS10 belt grinding station - Max. belt dimensions 3500 x 30 mm - Max. contact wheel diameter 200 mm - Motor power 4 kW 2 x polishing stations - Polishing wheel diameter 350 - 600 mm - Power 5.5 kW Tool changer cabinet Interoll Automation GmbH belt conveyor - Total length approx. 2000 mm - Belt width approx. 440 mm We have 4 such cells.

Condition: excellent (used), Year of construction: 2007, Type: CNC Lathe (horizontal) Manufacturer: Spinner Model: TC 52 Year of manufacture: 2007 Serial number: 123445 Fgjdpfx Akeyki Hmsvef Control: Fanuc Three-axis machine: XZ C (C-axis is positioning only – no driven tools) Bar diameter: 42 mm Three-jaw chuck: 165 mm Operating/spindle hours: approx. 32,500 h / 6,400 h (read 11/2025) Accessories: chip conveyor, high-pressure coolant (IKZ), chuck, documentation Condition: Good

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Fgjdst Akt Ropfx Akvef Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: as good as new (ex-display), Demo device with less than 20 operating hours // BEST CONDITION System: Optiv M 6.6.4 multi-sensor coordinate measuring machine with Dual Z technology Probes and sensors: - 10x CNC motor zoom with digital color camera and 12-segment LED ring light - HPsS-X1H Scanning Sensor with HH-A-T5 - HP-S-X1C/H stylus holder (1xM3) - M3 stylus kit for HP-S-X1C sensor - HR-X button rack for HP-S-X1C/H (3 ports, L=400) - Sensor calibration unit without calibration artifacts - Glass standard 25mm - Ring gauge 20mm Computers and software: - Measurement and evaluation software PC-DMIS CAD++ - Machine control unit BEST - Dell 27" monitor - work table Fedpfx Aksncfd Rjvogf Optional accessories: - Chromatic white light sensor (CWS) - CWS measuring head 3mm - Solara.MP12 - QA STAT 12 - O-QIS 12 Delivery, commissioning and other services on request If desired, the measuring device can be converted from OptiCheck3D V 5.0

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Fgedpsxvw Izefx Akvjf Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Machine can be inspected under power by arrangement.

Condition: used, Year of construction: 2008, turning diameter: 275 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,345 mm, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, Equipment: documentation/manual, CNC Lathe with Y-axis, driven tools an 2nd spindle CNC Control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 / 366 mm Spindle bore diameter 80 mm Spindle speed 4000 R/min Spindle motor 18.5/15 Kw Fedpfx Aey Nyzgekvsgf Movement X-axis 260 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1345 mm Movement W-axis (subspindle to mainspindle) 1275 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper BMT Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 6000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.