2025 Göckel G50eIT

Göckel G50eIT

Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: C4655, grinding length: 5,000 mm, grinding width: 500 mm, Sanding length: 5000 mm Sanding width: 500 mm Workpiece height: 250 mm spindle diameter in front bearing: 190.5 mm pivotable 0.7° Max. Torque: 1771 Nm Max. speed: 593 min/-1 Gcjdpfx Ageq U Ihve Dea Feed: infinitely variable 20-35,000 mm/min Trapezoidal segment head diameter 800 mm with Trapezsegmenten: 94/103x38x200mm Marposs measuring device Hydraulic upper part clamping and swiveling Sanding mist extraction system: Hydrocyclone cleaning system Machine weight approx. 27.6 tons Space requirement approx.: 11.2 x 4.3 x 3 m

Year of construction: 1990, condition: used, machine/vehicle number: 90030003, table size: 500 x 1200 mm movement x: 1000 mm Gcsdpfo Npwfjx Ag Dja movement y: 550 mm movement z: 600 mm spindle taper: ISO 40 spindle turning speed range: 60 - 2700 rpm spindle drive: 10 kW electrical connection: 380 V, 20 kVA kW space needed: 3200 x 2800 x 2650 mm weight: 7,3 t

Condition: good (used), functionality: fully functional, Amada mod. Togu-EU sharpening machine with PLC for sharpening punches and dies of punching machines complete with accessories. Gcedpst Daiwjfx Ag Doa

Year of construction: 2019, condition: ready for operation (used), An industrial knife grinding machine MVM for sharpening woodworking parts is available. Knife length: 6000mm, control: Siemens PLC with remote control. Includes an extraction system, a magnetic table, and a chip filter. Documentation available. An on-site inspection is possible. Gcjdpfxew I E Eae Ag Dea

Condition: excellent (used), Well maintained tool grinding machine with rotating grinding head for 2 different grinding wheels. Wet grinding with pump and tank. Gedpfxelxpcks Ag Dsca All angles adjustable. Diamond grinding wheel. Pneumatic carriage control.

Condition: excellent (used), Year of construction: 1988, TECHNICAL DATA. Max. clamping length: 90 mm Tool clamping height with tapered shank: 50 mm Tool clamping height with straight shank: 45 mm Max. helix angle: 45° Number of clamping positions: 1 to 99 Max. slide travel: 550 mm Max. grinding wheel diameter: 350 mm Min. grinding wheel diameter: 150 mm Grinding wheel speed (variable): up to 2700 rpm Swivel range of grinding spindle axis: 0° to 15° Grinding slide feed rate (variable): 0.05 to 16 mm/min (with 3rd and 4th axis: 0.05 to 8 mm/min) Workpiece spindle taper: ISO Taper No. 40 Gcjdpfxowwkace Ag Dsa Grinding Wheel Data CBN and diamond cup grinding wheel: Ø200 mm → Min. DFF: 66 (3rd axis), 76 (4th axis) Ø250 mm → Min. DFF: 16 (3rd axis), 26 (4th axis) CBN-ES cone grinding wheel: Ø200 mm → Min. DFF: 50 (3rd axis), 60 (4th axis) Ø250 mm → Min. DFF: 0 (3rd axis), 10 (4th axis)

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Gsdsfxygwopfx Ag Deca Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: used, Year of construction: 1999, Description: Suitable for grinding spiral and straight-fluted tools as well as for surface grinding using fixed pre-programmed standard grinding programs. Accessories: Total enclosure Glass scales on the X and Z linear axes PSM 118 measuring and positioning probe for spiral pitch and breast bevel Stepless speed control Manual central lubrication Wet grinding device 1 grinding wheel guard Machine light 2 grinding wheel flanges. Hub X-axis (NC): 360 mm stroke Workpiece spindle holder A-axis (NC): SK 50 Y-axis stroke (manual): 250 mm Grinding spindle speed infinitely variable: from 2000 - 9000 rpm Z-axis stroke (manual): 300 mm drive power grinding motor: 2.2 kW Grinding wheel diameter: Max. 200 mm mass: about 1600 kg Connected load: 2.2 kW (400 V / 50 Hz) Dimensions W x D x H: approx. 1395 x 1565 x 1990 mm colour: Grey Godpfxjxy N A Es Ag Deca

Year of construction: 1983, condition: excellent (used), Equipment Touch probe: ZEISS RDS (touch trigger, continuous rotary/swivel unit) CNC control 16Bit Probe changing device: optional Optional various probes on measuring machine The machine can be upgraded with new software according to customer requirements. Measuring range X = 4000 mm Y = 2000 mm Z = 2100 mm Price: on request! Assembly and commissioning possible! Gcodpeff Ea Defx Ag Dja We would be happy to provide you with a detailed offer! Please note: Our offer is directed exclusively to professional customers! (Changes and errors in the technical data, information and prices as well as prior sale reserved)

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 8292, grinding length: 3,100 mm, total width: 1,500 mm, total length: 5,100 mm, total height: 1,800 mm, grinding width: 200 mm, type of input current: three-phase, workpiece weight (max.): 1,000 kg, input voltage: 400 V, grinding spindle speed: 1,800 rpm, coolant pump power: 100 W, grinding spindle motor power: 1,100 W, overall weight: 2,500 kg, grinding wheel diameter: 200 mm, grinding wheel width: 20 mm, table height: 200 mm, table length: 3,100 mm, table width: 200 mm, control cabinet width: 400 mm, control cabinet length: 1,200 mm, control cabinet height: 1,500 mm, New machine, still in original packaging! Gedjx Ezu Tjpfx Ag Deca