Four side Planer

FUTURA Rotomat 220/5

Condition: used, Four-sided planer moulder SCM Sintex NTE Electronic four-side planing and profiling machine Planing width: 180 mm Planing height: 105 mm 4 spindles Spindle motor 1 + 4: 7.5 kW Spindle motor 2 + 3: 7.5 kW Spindle diameter: 35 mm Long infeed table approx. 2300 mm Spindle speed: 6000 rpm Giedpfxoyi Eaae Ahvsp Feed speed: 6/12 m/min Electric height and width adjustment Lubrication pump incl. planing tools Machine WORKSHOP TESTED and in VERY GOOD CONDITION Available ex stock Lieboch / LEASING POSSIBLE

Year of construction: 2020, condition: used, No. 3233 Cross milling machine Wema Probst QBV 200 Used, year of construction 2020 The machine is in mint condition, less than 30 holes have been drilled. The QBV 200 is designed for fitting cross milling and holes in both round milled or profiled logs. This machine permits to make perfectly adjusted connections in rounded logs by three-dimensional manual adjustment. Their fields of application are e.g. the angle joints for log cabin constructions, frame constructions or the wooden material for the “landscape architecture” e.g. fences, carports, palisades, flower boxes, raised-beds, guardrails etc. The cross milling machine consists of a base frame in welded steel construction with a swivel-mounted drilling device and gas spring-supported drilling column as well as an adjustment for the position of the drilling column. The wood is clamped with two centering vices. With the special tool (round saw), asymmetrical or end-face processing can be carried out. The machine can also drill 90° holes up to 120 mm diameter in wood by flat drill. Gedpfx Ahowt Abwjvjip Accessories: Collet chuck with 25 mm diameter for the tool holder, without tools Wood diameter: 60 - 200 mm Adjustable range of tools: +/- 60° for 60 mm diameter range / +/- 45° for 80 mm - 140 mm diameter range / +/- 30° for 160 mm - 200 mm diameter range Motor capacity: 2.2 kW Number of revolutions: 1200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm LWH Weight approx. 380 kg Sale on behalf of customer, from location near 46026 Valencia (Spain), without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, saw blade diameter: 600 mm, Power supply: 400 V Gsdpfox Nnd Aex Ahvoip Blade diameter: Ø 600 mm Machine weight: 1820 kg Year of manufacture: 2006 Type: CT 600 Motor power: 7.5 kW Serial number: 260856 Infeed pusher dimensions: 10,300 × 2,000 × 1,250 mm Outfeed conveyor dimensions: 6,300 × 800 × 1,120 mm Outfeed table dimensions: 5,000 × 1,250 × 910 mm Rotational speed: approx. 2600 rpm Table rotation range: max. ±70° Cutting height: approx. 200 mm (at 0°) Max. cutting width: approx. 410 mm Minimum workpiece size: 20 × 10 mm Positioning accuracy: ±0.4 mm Cycle time: approx. 4 seconds per cut Working height: 1000 mm Chip extraction connections: Ø 100 mm Beckhoff control with 12-inch touchscreen (Windows interface), 3D element visualization, cutting list import via USB/Ethernet.

Condition: excellent (used), CATALOG NUMBER 7753 Gedpfxexhddge Ahvoip TECHNICAL SPECIFICATIONS - max diameter of machined dowels: 130mm - installed bushing: 110mm - max diameter of input material: 160mm - min length of input material: 800mm - max machining allowance per side: 15mm - cutter head drive motor: 15kW - 3 feed speed options + forward/reverse - feed motor: 1.1kW Configuration: - 3 toothed feed rollers - 3-knife cutter head - 3 smooth discharge feed rollers - dimensions (L/W/H): 3100x1400x1500mm - weight: 2100kg ADVANTAGES – made in Poland – 3-knife cutter head – used rounding machine, very good condition Net price: PLN 36,900 Net price: EUR 8,780 based on an exchange rate of 4.2 PLN/EUR (Prices may vary with significant fluctuations)

Condition: excellent (used), Year of construction: 2018, Stromab CT600 circular saw with 6 m infeed table. Gjdpfx Ahjxzu U Aoveip

Condition: excellent (used), Year of construction: 1999, H+K Four-Side Planer & Thicknessing Machine Quadroplan 180 Godsydmawepfx Ahvjip Planing width: 20 - 180 mm Planing height: 5 - 120 mm Infeed table length: 2,100 mm Separate motor for each spindle Upper spindle motor: 5.0 kW Lower spindle motor: 4.0 kW Left spindle motor: 4.0 kW, automatic flow head Right spindle motor: 4.0 kW Max. spindle speed: 6,000 rpm Spindle diameter: 30 mm Max. feed speed: 8 m/min Cardan drive feed Feed motor power: 0.75 kW Total connected load: approx. 18.0 kW, 400 V, 50 Hz Extraction ports: 2 x 120 mm, 1 x 140 mm, 1 x 160 mm Dimensions (L x W x H): 3,370 x 1,330 x 1,500 mm Weight: approx. 1,280 kg Planing height adjustment, motorized with digital display Planing width adjustment, motorized with digital display Pneumatic spindle locking Unpowered outfeed roller Automatic centralized lubrication Automatic star-delta switching INCLUDES 4 reversible knife cutterheads INCLUDES operating manual & circuit diagram CE certified All bearings NEW All drive belts NEW Note on used machines: • Errors in technical details and prior sale excepted. • Prices listed are ex location – free loaded! • Machines have been cleaned and function tested. • All machines are sold as inspected, with no warranty or liability. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Features and Technical Data: - Length of jointer table: 2100 mm - Spindle diameter: 30 mm Giodpfx Ahex Enrfevop - Planing head diameter: 100 mm - Planer spindle speed: 6000 rpm - Working width: 30 - 180 mm - Working height: 6 - 120 mm - Motor power, bottom/left/right: 3.7 kW each - Motor power, top (thicknessing shaft): 5.5 kW - Feed speed: 6 and 12 m/min - Electric height adjustment - With 1/10 step control - Including electronically controlled infeed roller - Including planing heads - Extraction connectors: 160/120/120/140 mm Availability: short-term Location: 63934 Röllbach

Condition: excellent (used), Weinig H30N four-sided planer Working width 300mm Working height 200mm Number of spindles 5 Spindle arrangement: Bottom 11kw Right 11kw Left 11kw possibility to change spindle angle up to 90° Right 7.5kw ability to change spindle angle up to 45° Giodpoumtlkjfx Ahvsp Top 11kw Feed speed adjustable with variator up to 22m/min Feed motor 9kw Drive in work table: - 3 rows of grooved drawing rollers in front of the first head - 5 rows of smooth pulling rollers Top drive: - 9 rows of pulling rollers Weight of the machine 6100kg Machine dimensions 470x190x160cmH

Condition: ready for operation (used), Year of construction: 1998, CNC Wood Machining Centre manufactured in 1998. This HUNDEGGER K1 features a maximum workpiece length of 13,000 mm, a workpiece width of 450 mm, and a thickness of 300 mm. It includes various milling and drilling units, along with a ReaJet printer for material marking. If you are looking to get high-quality wood machining capabilities, consider the HUNDEGGER K1 machine we have for sale. Contact us for further details. • Max. workpiece width: 450 mm • Max. workpiece thickness (height): 300 mm • Max. workpiece length: 13,000 mm (13 m) Additional equipment Gjdpfxsymz Uhs Ahvsip • Cylindrical milling cutter 350 mm x 80 mm (new type) • End mill 160 mm x 40 mm – 2 pieces • Circular saw blade – 2 pieces • Dovetail cutter mounted on the cylindrical milling cutter • End mill 100 mm x 30 mm mounted on the horizontal unit • Chain slotting unit • Drilling units: 2 vertical, 1 horizontal • ReaJet printer for printing markings on the material • Cylindrical cutter Ø 265 mm for corner joints, mounted on the main unit • Vertical ink marker at the machine exit

Condition: excellent (used), functionality: fully functional, STROMAB CT800 Beam Cutting Centre Beam cutting centre for large cross-sections, making it an optimal solution for woodworking and timber frame construction. With electronically controlled 5-axis technology, it meets all requirements for straight, inclined, and compound cutting. It guarantees maximum processing speed and finished product quality, reducing labour input and maximizing productivity. Specification: Electronic adjustment of blade tilt angle 90 - 45 degrees Maximum cutting width 650 mm Electronic saw height adjustment Automatic material feeding Touchscreen control panel Godoytnftepfx Ahveip Rotary worktable 0-345 degrees Maximum blade diameter 800 mm