Welding machine

FRONIUS TPS 4000 (3184)

Condition: used, Year of construction: 1975, bore capacity in steel (diameter) 35.0 mm bore capacity in cast iron 40.0 mm throat 300 mm bore stroke 180 mm turning speeds 65 - 1750 U/min table-size 425 x 500 mm column diameter 155 mm feed 0.1-0.2-0.3 m/min Godexabuajpfx Ag Deca spindle taper MT 4 MK engine output 0.9 / 1.5 kW weight 450 kg range L-W-H 800 x 650 x 1850 mm Machine from a vocational school good / well-maintained condition (!!) Equipment: - robust motor-driven pillar drill with VARIO drive (V-belt) - electro-automatic spindle feed - pole-changing motor - stepless speed adjustment (VARIO drive) - adjustable drilling depth stop - machine table with 2x T-slots * height adjustable via hand crank - 1x used machine vice - machined base plate - coolant device - connection cable + connection plug - original operating instructions

Condition: new, grinding range 2 - 20 mm Gcodoupxkwjpfx Ag Doa sharp cornered angle min./max. 90 - 135 Grad connected load 230 V weight of the machine ca. 8,6 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0523813, Offer 22728 Technical data: Gcjdpform Rpvjx Ag Doa - Welding current max 335 A 35% ED - max 260 A 60% ED - max 200 A 100% ED - Welding current is regulated in 36 fine stages from - 40 A - 335 A - 2 rollers wire feed - Roller wire feed infinitely variable - 2 cycle - 4 cycle regulation - Spot welding + interval welding - Air-cooled hosepack 4 running meters - Ground cable - pressure reducer - 400 V connection - Space requirement approx. W 550 x H 1000 x D 1000 mm - Weight approx. 150 kg

Condition: good (used), Year of construction: 1984, machine/vehicle number: 15470, Offer 25095 Technical specifications: - Drilling capacity in steel ST 60: 40 mm - Drilling capacity in steel ST 60: 50 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 180 mm - Drill spindle speeds continuously adjustable with gearing - Stage 1: 50 - 175 rpm - Stage 2: 175 - 640 rpm - Throat depth: 330 mm - 3 feed rates: 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots: 720 x 360 mm - Table height adjustable via rack and pinion with hand crank Gcodpfewd Ii Usx Ag Dsa - Max. distance between table and drill spindle: approx. 780 mm - Max. distance between machined base plate and drill spindle: approx. 1250 mm - Coolant system - Lighting - Drive: 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0518018, Offer 24600 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED Gcedpfx Ajvncfmsg Dja - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 14 linear meters - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, ALZMETALL AX 4 / SV pillar drilling machine 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: NEW Year of manufacture: 2025 Drilling capacity steel E335 (St 60) 55 mm Thread cutting Steel E335 (St 60) M 42 Cast EN-GJL-200 M 56 Short spindle MK 4 Spindle stroke 140 mm Usable projection 300 mm Column diameter 145 mm Machine table, usable support 615 x 430 mm Distance spindle-table min./max. 150/735 mm T-slots, number x width x distance 2 x 14 x 224 mm Feed 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Drive stepless Motor 1500 rpm Power 3.0 kW Spindle speed rpm 70-2400 Standard equipment: Main switch with motor protection switch, lockable Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Speed display digital Feed overload protection Protection class IP 54 Spindle protection with electrical protection Paint: DD structural paint signal white RAL 9003, PANTONE 7545c, black Machine oil: initial filling; Container supplied loose Available options: - LED machine light Gcedjxd Ttpopfx Ag Dsa - Thread cutting device with soft start (from 2025) - Coolant device in the base - Digital drilling depth display - Drilling depth fine adjustment 0.1 mm

Condition: used, Year of construction: 1965, bore capacity in steel (diameter) 40 mm Gcedpfx Agov S Iqco Dja total power requirement 4 kW

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0625004, Offer 24603 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED Gedsvncqvopfx Ag Djca - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 10 linear meters - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg