Milling Machine

Fritz Heckert FU 315/FW 400

Condition: new, functionality: fully functional, Spare parts for Fritz Heckert milling machines F315, F400 - even for the oldest ones. Tjdpfx Apjvtnfpjded We offer a full range of spare parts for milling machines – the old and new German WMW HECKERT milling machines F315, F400, FSS-350MR, FSS-400MR, FU-350MR, FU-450MR, FU-350ApUG, FU-450ApUG, FU-350MRApUG, FU-450MRApUG. In our stock one can find: milling machine head and all gears for it, dividing heads, lunette/rests, all electromagnetic clutches and brakes, shafts, bevel gears, worms and worm gears, pulleys, levers, longitudinal and cross screws, nuts, oil pumps, cooling pumps, spindles, quills, hydraulic dividers/distributors etc. All the original parts for Heckert milling machines we can offer directly from stock, ready for immediate shipment. All parts are new, executed in German quality, and meet the highest technical standards.

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Tjdpfx Apjihf Ufodod Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

Condition: used, Year of construction: 2000, centre height 400 mm centre distance 3.000 mm max. swing over bed 810 mm max. swing over facing slide 510 mm max. swing-dia. in gap 850 mm control WEILER max. workpiece weight 3.800 kg spindle diameter in front bearing 150 mm spindle bore 106 mm faceplate diameter 630 mm worktool system Parat tailstock quill taper MT 6 dia. of quill 115 mm spindle turning speed range 1 - 1.800 U/min Tedpfxjy Ty Ihj Apded Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. A comprehensive tool package is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-80 | E 80 | E80 x 3000 | E80x3000 | E 80 x 3000

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm throat: 285 mm Tsdeu Idkzjpfx Apdod bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm table rotating: 360 ° drill table adjustment: 600 vertical mm column diameter: Ø 130 mm total power requirement: 7,5 kW weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height. *

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Heyligenstaedt Heynumill 2700-PF 3/5-axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Control: Heidenhain TNC 430 Tedpfxeyaazme Apded X-axis Y-axis Z-axis 3,000 mm 4,000 mm 1,500 mm In 2018, the Heynumill underwent a complete overhaul of the hydraulic system, replacement of all electrical cables, renewal of the spindle cooling unit, both longitudinal conveyors were replaced, and the milling heads were completely refurbished. The entire refurbishment cost €160,000. In 2020, the milling gearbox was renewed.

Year of construction: 1994, condition: excellent (used), machine/vehicle number: 04.2398, Manufacturer: Arthur Klink Type: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of construction: overhauled by manufacturer 1994 Tedpfx Ajgyd T Ejpdsd weight: 3700kg tractive force: 10.000kg (100kN) max. stroke: 1500mm max. workpiece diameter: Ø 500mm clearing speed: infinitely variable from 1m/min to 6m/min return speed: stepless adjustable up to 20m/min power supply: 400V / 50Hz

Condition: used, functionality: fully functional, machine/vehicle number: M5608*10687, Year of construction: 2001, operating hours: 35,000 h, load capacity: 13,600 kg, lifting height: 5,250 mm, free lift: 1,750 mm, fuel type: diesel, mast type: triplex, construction height: 3,200 mm, fork length: 2,400 mm, empty load weight: 19,321 kg, total length: 5,455 mm, drive type: Diesel, construction width: 2,550 mm, Heavy-duty forklift - Diesel Chassis number: M5608*10687 Load center: 600 Mast type: Triplex Transmission: Clark 13.7HR32334-104 Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 12.00-20 Front tire condition: 80 - 100% Rear tire type: Pneumatic Tedpfxoyldxmo Apdjd Rear tire size: 12.00-20 Rear tire condition: 40 - 60% Side shifter, fork positioner, Full cab, twin tires,

Year of construction: 2017, condition: ready for operation (used), Offered is an OptiMill MF 4V milling machine, almost new, 100h. Year of construction 2017, travel ranges X/Y/Z: 800mm/320mm/400mm, stepless spindle speed 9-6750rpm in 8 speed ranges, with electronic speed control, quill stroke: 127mm, 3-axis digital display DPA21, right/left rotation reversing switch, drilling depth stop, cross table X/Y 1244mm/230mm T-slot 16mm, chuck guard, coolant system, manual central lubrication, universal compressed-air tool clamping system ISO 40, stepless table feeds in X/Y, weight approx. 1200kg. Viewing is possible by arrangement. Tedpfx Apjxyk Ucsdjd

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Tsdpfxou Ng Nce Apdod Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: used, Year of construction: 2012, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2012 Control : Heidenhain iTNC 530 Speed : 18000 rpm Movement X/Y/Z : 3600/1100/900 mm Tool holder : HSK 63 In General: Year of manufacture:2012 Control system:Heidenhain iTNC 530 Travel range X/Y/Z:3,600/1,100/900 mm Speed:18,000 rpm Tool holder:HSK 63 Spindle: Technology:Motorised spindle Speed:18,000 rpm Max. power:35 kW Max. torque:130 Nm Tool holder:HSK 63 NC swivel head: B-axis:+/- 100° Resolution:0.001° NC rotary table: C-axis:360° Resolution:0.001° Clamping surface:1,050 mm Max. table load:1,200 kg Todpfsz S S Elox Apdsd Fixed table: Clamping area:4,200 x 1,100 mm Max. table load:1,200 kg/m Tool magazin: Technology:Chain magazine Number of stations:60 Tool changer:Double gripper Max. tool length:300 mm Max. tool diameter:80 (130) mm Equipment: Positioning sensors:Direct scales X-Axis:Direct drive Chip removal:Chip conveyor Coolant supply:Internal cooling system, 40 bar Tool measurement:LASER Workpiece measurement:Touch probe Set-up:Electronic handwheel