Orbital riveting machine radial riveting

FMW Friedrich N100

Condition: good (used), Second-hand machine in good condition Control type: Conventional active digital Location : 35708 Haiger Price : 13.500€ excl. Technical data: Digital display 3-axis digital display HEIDENHEIN TNC 134 Travel X-axis 500 mm Travel Y-axis 350 mm Travel Z-axis Hsdpfjigv Ipex Aahsp 380 mm Tool holder Vertical milling head SK 40 with hydr. tool clamping DIN 2080 ring groove Table type Fixed table Table clamping surface 800 x 360 mm T-slot size 14 mm Weight 1,600 kg Dimensions 1500 x 2000 x 1900 mm Accessories - Central lubrication - coolant system - Operating instructions

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 2,500 rpm, quill stroke: 100 mm, For sale is an Emco tool milling machine, model FB-4. The machine was previously used exclusively for inter-company training purposes. Currently, two identical Emco FB-4 machines are still in stock. Tool Milling Machine V/H Manufacturer: Emco Model: FB-4 Year of manufacture: 2005 Control: Heidenhain ND-750 display Technical parameters: ----- • Travel X-Y-Z: 450 x 300 x 350 mm • Clamping surface: 800 x 400 mm • Tool holder: SK-40 • Tool clamping: hydraulic • Quill stroke: 100 mm • Milling head swivels ± 90° • Spindle speed: 50 – 2,500 rpm • Speed selection: 18 steps • Electric central lubrication • Machine lamp Hedpfeyvra Iex Aahep • Coolant system • Splash guard cabin (foldable) • Weight: 1,550 kg • Dimensions LxWxH in mm: ..1,485 x 1,500 x 1,700 mm Accessories: ----- • 4x machine leveling feet • Operating manual • Counter bearing for horizontal machining • Shaft for horizontal machining • Table enclosure (currently removed) • 10x SK-40 tool holders

Condition: excellent (used), Year of construction: 1999, Hermle UWF 802 M Hermle UWF 802 M with NC control HS, cycle-controlled, year of manufacture 1998, in excellent original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical specifications: Hsdswyn Rqopfx Aahop Travel paths X: 500 mm, Y: 430 mm, Z: 400 mm Table size: 800 x 390 mm Spindle taper: ISO 40 Spindle speed: 71 to 3550 rpm, 18 steps Feed rate X and Y: 2 to 1600 mm/min, stepless Feed rate Z: 2 to 1000 mm/min, stepless Rapid traverse X and Y: 1.6 m/min Rapid traverse Z: 1 m/min Spindle drive: 3 kW Power connection: 400 Volt, 50 Hz - Spindle speed adjustable in 18 gear steps - Vertical milling head swivels to the right and left - Hydro-mechanical tool clamping vertical and horizontal - Automatic central lubrication - Separate coolant unit - Control cabinet fixed to the machine - Fixed angle table - Operating manual and wiring diagram Required space (L x W x H): 2000 x 1800 x 1950 mm Weight: approx. 1750 kg Accessories and equipment: Operating manual, electrical diagrams Machine feet About the machine: We offer a Hermle UWF 802 M milling machine with NC control HS, cycle-controlled, year of manufacture 1998, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take this opportunity to view the machine under power on-site and see its condition for yourself.

Condition: like new (used), Year of construction: 2001, Gildemeister NEF 320 K Cycle-Controlled Lathe Siemens Sinumerik 810 DL Control Year of Manufacture: 2001 Very Good Original Condition Technical Specifications: Year of manufacture: 2001 Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Centre distance: 750 mm Cross travel: 185 mm Feed X: 4 m/min Feed Y: 4 m/min Rapid traverse X: 8 m/min Rapid traverse Y: 10 m/min Spindle nose DIN 55027 size 6 Spindle bore: 52 mm Drive power (100%): 7 kW Speed range: 14–3550 rpm (2 ranges) Tailstock quill diameter: 70 mm Tailstock quill stroke: 120 mm Tailstock taper: ISO MK 5 Dimensions: 2600 x 1440 x 1440 mm Machine weight approx.: 2.0 t Accessories and Equipment: About the Machine: Offered here is a Gildemeister NEF 320 K cycle-controlled lathe with cycle control, year 2001, in very good original condition. The machine is, of course, fully operational. The slides run very smoothly and evenly. Even at high speeds, the Gildemeister operates very quietly. This latest generation of lathes is very user-friendly and allows for surface finishes similar to grinding. The machine comes from a training workshop of a large industrial company. Take the opportunity to inspect this machine under power on site and convince yourself of its condition. Hodpfx Aaowx Rbpjhjp

Condition: excellent (used), functionality: fully functional, Riveting machine with pneumatically controlled 6-station rotary table. Riveting process triggered via foot pedal. Maximum rivet shank diameter for steel rivets: Ø 8 mm. Working stroke adjustable from 5 to 40 mm. Functional video available and can be provided upon request. Very good condition, immediately available! Hedpfjzg Hf Rsx Aahsp