Modular milling cutter hob 6 pieces

Fette Mod.2,5 R1 EW 20°

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Year of manufacture: 1970 Max. workpiece diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Bwedpfoxln Iwjx Al Rer Max. helical angle: 45 degrees Hob diameter: 500 mm Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available.

Condition: used, Modular milling cutter Module 8 Bedpfx Aodklt Nol Rjwr 20 degrees Length 1800 mm Diameter 120 mm Inner diameter 40 mm

Condition: used, Year of construction: 1972, turning diameter over bed 1650 mm turning diameter over slide rest 1350 mm turning length 10000 mm Bjdoy S Duvspfx Al Rjwr turning speeds 1,4 - 280 U/min greates pass round over bed 1580 mm center height over square guideway 825 mm bed length 13.350 mm bed width 1.120 mm spindle diameter in front bearing 260 mm spindle bore 82 mm upper head travel 500mm tailstock quill diameter 200 mm max. workpiece weight between centres 10.000 kg weight of the machine ca. 25,5 t Power 45 KW The machine is a first-hand purchase, is free from defects and is in very good condition. In 2023, the headstock was overhauled; this included replacing the main spindle bearings, chrome plating and reworking the main spindle and bottom wheel (bearing seat). The guideways are also in very good condition, considering their age. Accessories - Feed guard Equipment - 3-axis digital display - 1 x faceplate - 1 x roller stand - Chip conveyor (Kabel Schlepp 300/100)

Condition: good (used), Year of construction: 1983, FGSH 50 TOS KURIM milling machine. Year of manufacture 1983 (CZE). Double-torsion head (new bearings, new gears). Beam to the level with the eyepiece. Parameters: Table 630 x 1800 mm. Travels: X - 1430 mm, Y - 670 mm, Z - 500 mm. ISO 50. Speed ​​range 45-1400 rpm. Main engine power 15 kW. The demand for a power of 23 kW. Dimensions: Bsdpfx Asdqp Euel Rewr Length X Width X Height: 3200 X 3475 X 2620 mm. Weight 6500 kg.

Condition: good (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter Bodpfx Alogfcnks Rowr -Manufacturer: Fette/JAL, 23 hob cutters -Hole: Ø 16 mm 13 pieces, Ø 22 mm 4 pieces, Ø 27 mm 6 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 250/170/H90 mm -Total weight: 9.8 kg

Condition: good (used), Reamer, twist drill, drill bit, spiral countersink, three-flute, twist drill -Three-knife -Diameter: 17.75 mm -Usable length: 150 mm -Recording: MK2 -Type: HSSE Bjdpfxeb A Rb Hj Al Rewr Quantity: 19 pieces -Sale: only complete set -Weight: 6 kg

Condition: used, Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Abrasives: 48 types, 189 pieces in total -Outer diameter: 40 to 300 mm -Type: 1 photo with type designation/dimensions can be sent per article Bodpfxjggtvno Al Rowr -Price: complete -Dimensions: 1200/800/H200 mm -Weight total: 202 kg

Condition: used, functionality: fully functional, Various used rack milling cutters / rack group milling cutters from different manufacturers. Our asking prices are net, ex works, plus packaging costs, starting from €170. Individual prices as follows: Manufacturer: Arnold Dold GmbH & Co.KG Module 0.5 - Group milling cutter - Asking price €370 Module 0.7 - Group milling cutter - Asking price €380 Module 0.9 - TIN coating - Asking price €530 Module 1 - 2 units available - Group milling cutter - Asking price €390 Module 1.25 - Group milling cutter - Asking price €410 Module 1.5 - TIN coating - Asking price €750 Module 1.75 - Group milling cutter - Asking price €730 Module 2 - 4 flutes - one defect - 1.89 kg - Asking price €210 Module 2 - TIN coating - Asking price €770 Module 2.5 - 8 flutes - one defect - 13.52 kg - Asking price €470 Module 3 - one defect - 13.29 - Asking price €230 Module 3 - 7 flutes - Reground - 13.77 kg - Asking price €200 Module 3 - 3 flutes - Asking price €290 Module 3 - TIN coating - Asking price €520 Bedpeytrh Esfx Al Rowr Module 5 - 4 flutes - Reground - 12.15 kg - Asking price €170 Module 5 - 4 flutes TIN coating - Asking price €750 Module 6 - 3 flutes TIN coating - Asking price €760 Module 6 - 3 flutes TIN coating - Reground - 11.16 kg - Asking price €400 Module 7 - 3 flutes Reground - 11.41 kg - Asking price €430 Module 8 - 3 flutes Reground - 5.28 - Asking price €190 Module 8 - Reground - Asking price €450 Module 8 - TIN coating - Asking price €780 Module 10 - TIN coating - Asking price €790 Module 10 - Reground - Finished milling cutter - 0.515 kg - Asking price €320 Module 12 - 2 units - TIN coating - Finished milling cutter - Asking price €580 Module 13 - Finished milling cutter - Asking price €410 Module 14 - Reground - 5.18 kg - Asking price €240 Module 16 - Asking price €600 Module 16 - Reground - 5.14 kg - Asking price €300 Involute angle: 20° BPII-Ü Bore diameter [mm] 40; 50; Groove [mm] 10: 12 Width [mm] 32.5; 45.5; 44; 17/21; 16/20; 14/18; 21/25; 18/22; 65/73; 48/57; 31; 66/72; 69/77; 70/78; 60/64; 60/66; 82; 72/80; 82; 40; 39; 47; 52; 56; 64 Outer diameter [mm] 169; 140; 141; 200; 150; 198; 195; 199; 197; 201; 200; 219; 192; 191 Manufacturer: Saazor - Wälztechnik ZORN GmbH & Co. KG Module 1 - 16 flutes TIN coating - one defect - 10.18 kg - Asking price €510 Module 1 - 16 flutes TIN coating - Asking price €590 Module 1.5 - 9 flutes Group milling cutter 9 flutes - Asking price €560 Module 2 - Pin milling cutter - Asking price €390 Module 6 - Pin milling cutter - Asking price €640 Module 10 - TIN coating - Asking price €350 Involute angle 20° DIN 3972 II - Ü or DIN 3972 II Kl. A - Ü Bore diameter [mm] 40 Groove [mm] 10 Width [mm] 52/60; 55/85; 60/90; 33/40 Outer diameter [mm] 176; 200; 198; 199 Manufacturer: Klingelnberg Module 2.5 - Asking price €360 Module 2.75 - Asking price €380 Module 3.25 - Asking price €170 Module 3.75 - Asking price €200 Module 4.5 - Asking price €220 Involute angle 20° Bore diameter [mm] 40 Groove [mm] 10 Width [mm] 30/38; 28/36; 35/42; 39/47; 44/52 Outer diameter [mm] 148; 149; 150 Subject to typing and calculation errors. Sales are exclusively within the EU countries.

Condition: good (used), functionality: fully functional, mileage: 186,465 km, first registration: 03/2007, fuel type: diesel, overall weight: 48,000 kg, tire condition: 80 %, axle configuration: 8x8, fuel: diesel, color: orange, Year of construction: 2007, operating hours: 23,373 h, Equipment: crane, truck registration, 🔧 Key Specifications Manufacturer: Tadano Faun Model: ATF 65G-4 Year of manufacture: 2007 Type: All-terrain mobile crane Max. lifting capacity: 65 t Axles / Drive: 4 axles, 8×8 Main boom: 11.0 – 44.0 m Jib: Swing-away jib 9.0 m / 16.0 m (depending on configuration) Max. lifting height: up to approx. 60 m (depending on configuration) Slewing range: 360° Bedpeycwfzjfx Al Rjwr Outriggers: Fully hydraulic Engine: Mercedes-Benz diesel Transmission: Automatic (ZF) Gross vehicle weight (GVW): approx. 48,000 kg Country of manufacture: Germany CE certified: Yes ⏱ Hours & Mileage Chassis mileage: 186,465 km Superstructure hours: 23,373 h ⚙️ Condition Tadano Faun ATF 65G-4 all-terrain mobile crane in good working condition. The crane is fully operational and ready for immediate use. Normal signs of use consistent with mileage and operating hours. 📝 Description 65-ton all-terrain mobile crane with robust 4-axle 8×8 configuration, suitable for demanding lifting operations both on-road and off-road. Equipped with a telescopic main boom up to 44 m and swing-away jib options of 9.0 m and 16.0 m, providing excellent reach and operational flexibility. The crane is fitted with a load moment indicator (LMI), fully hydraulic outriggers, and a comfortable operator cabin with integrated monitoring and safety systems. 📍 Location & Delivery Current location: Bucharest, Romania Delivery: Worldwide delivery available upon request

Condition: new, Year of construction: 2018, Storage location number: 100325836 Transport dimensions (L x W x H): 0 x 0 x 0 Bwjdpezkz Nlefx Al Ror ---- Reach: 62.5m Including counterweight Hoisting mechanism: 45kW 120HC counter-rotating upper carriage Full-view cab Including radio remote control with feedback Including undercarriage with 4.6m track width, including spindles and support plates 2x 12.5m tower Including central ballast Location: Nuremberg