Electrical Injection Moulding Machine

FANUC Roboshot S130iA

Condition: excellent (used), Year of construction: 2017, operating hours: 14,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter und Drehteller Hersteller: ARBURG Typ: 470S1100-400/290 Baujahr: 2017 Schließkraft: 110 Tonnen Holmabstand 420 x 420 mm Einbauhöhe min. /max.: 450 mm Öffnungsweg: 950 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht: 141 g/PS Schnecken DN 2: 30 mm Hubvolumen: 106 cm³ Spritzteilgewicht: 97 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit Drehteller 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2010 Förderband Schutzzaun Nedpfx Aeu E E Susfrjli

Condition: like new (used), Year of construction: 2024, Fanuc Roboshot α-S150iA (2024) Hours: 1000 Clamping force: 180 t Screw diameter: 26 mm Nljdsw A I Sgopfx Afrsi Shot volume: 50 cm3 Roger: Shot speed 1200mm/s Type: Horizontal Drive: Electric

Condition: ready for operation (used), Year of construction: 2007, turning diameter over cross slide: 190 mm, turning length: 700 mm, turning diameter: 340 mm, spindle bore: 50 mm, Emco EMCOMAT-17D Nodpexc H Dfefx Afroli Distance between centers: 700 mm Swing diameter over bed: 340 mm Swing diameter over carriage: 190 mm Spindle bore/pass-through: 50 mm Spindle speeds: 35–3000 rpm Infinitely variable speed adjustment between gear ranges. Equipped with longitudinal and cross feed. 2-axis digital readout on X and Z axes. Multifix quick-change tool post.

Condition: excellent (used), Year of construction: 2008, Gravicolor 30 GC 30-M-O-Z Manufacturer: Motan Year of production: 2008 A gravimetric dosing and mixing unit designed for direct mounting on the inlet flange of a plastics processing machine. The device allows dosing and mixing of up to 4 granulated components. The actual, measured and weighed quantities are constantly compared with the set values using a modern microprocessor-based control system, which guarantees very high recipe accuracy (+/- 0.1%) thanks to continuous self-optimization. The complete unit includes: 2 feed tanks for primary material or regranulate/primary material 2 feed tanks for masterbatches or additives 2 pneumatically controlled conical dosing heads 2 precision dosing screws with motor drive Material tanks – capacity approx. 7 litres Weighing tank – capacity approx. 0.8 litres Mixing tank – capacity approx. 3.0 litres Manually operated gate valve GRAVInet controller with colour touch panel for recipe, milled material and process data management, vibration compensation and continuous self-optimisation; built-in Ethernet port and standard reporting/printing functions Technical data: Average capacity: 60 kg/h Njdewm Ii Topfx Afrjli Main component dosing range: 1–100% Additive dosing range: 0.5–10% Power supply: 1/N/PE 230 V 50 Hz Power consumption: 100 W Compressed air: 6–8 bar, without oil and water Weight: approx. 60 kg ✅ The set includes Piovan material feeders - visible in the photos.

Condition: as good as new (ex-display), Year of construction: 2023, Krauss Maffeii KM 120-380 PX injection molding machine Year of production : 2023 All-electric machine Five-point double lever-knee closing unit mechanism (three-plate unit) with servo-electric drive. Injection unit with servo-electric drive for injection and plasticization and servo-hydraulic drive for movement of the entire injection unit. MC6 industrial computer-based real-time Ethernet control system Plasticizing system Complete plasticizing system for thermoplastics with HPS-M screw with a diameter of 40mm Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE Closing unit - Mold closing force: kN1200 - Opening force of mold: kN 180 - Dimensions of the clamping plate (h x v):mm 640 x 590 - Clearance between columns (h x v):mm 470 x 420 - Mold opening stroke: mm 400 - Mold height min.- max. with option 45,468:mm 180 - 550 - Opening width with option 45.468: mm 950 - Ejector stroke: mm 175 - Forward/reverse ejector force: kN 22 / 10 - Ejector speed:mm/s 350 Injection unit - Auger diameter:mm 40 - Ls/D ratio: - 20 - Injection pressure:bar 1860 - Injection volume:cm3 201 - Injection weight:1): g 183 - Injection speed: mm/s 125 - Injection capacity: cm3/s 157 - Screw speed: 1/min 334 Nsdpfxovgdumj Afreli - Plasticizing capacity 1): g/s 24.7 - Torque: Nm 337 - Nozzle pressure force: kN 34 Electrical parameters - Connection value:kW 13.8 - Protection: A 63 - Installed heater power: kW 11,5 - Number of cylinder heating zones: - 5 - Dry cycle time / stroke according to Euromap 6 2):s/mm 1.5 / 329 - Oil tank capacity: dm3 120 Weight and dimensions - Net weight with control cabinet: t 6.9 - Dimensions of the machine (L x W x H) 3): m 5.3 x 1.60 x 1.88

Year of construction: 2012, condition: good (used), robot Engel Viper 20 RC 200 X= 700mm Y= tandem 1500mm Z= 2840mm B + C Servo year: 2012 price: 9.400€ Nodpfjgpwgasx Afroli contact : Mr. Rainer Eckerle

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1101255, spindle bore: 38 mm, center height: 125 mm, total length: 1,300 mm, total width: 700 mm, total height: 1,400 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 60 rpm, overall weight: 600 kg, Equipment: rotational speed infinitely variable, Machine type: LZ lathe Manufacturer: GDW Model: LZ250 S1 Year of manufacture: 2001 Condition: used / good / speed display currently not functional Other: original paintwork!! Nlsdpfjw Dhuksx Afrsi 3-axis digital display by Heidenhain Lots of accessories Collet chuck device, 4-jaw chuck

Condition: like new (used), Year of construction: 2015, Fanuc Roboshot S100iA (2015) nr. 16 Clamping force: 125 t Nlodpfx Afsw Agrlsrei Screw diameter: 36 mm Distance between tie bars V: 410 mm Distance between tie bars H: 460 mm Type: Horizontal Drive: Electric including transformator

Condition: excellent (used), Year of construction: 2012, Fanuc S2000 i 100B (2012) nr. 23 Clamping force: 100 t Screw diameter: 40 mm Distance between tie bars V: 410 mm Distance between tie bars H: 460 mm Nsdpfx Aew Axbrsfreli Type: Horizontal Drive: Electric Hours: 32426

Condition: ready for operation (used), Year of construction: 2017, operating hours: 21,445 h, Control Unit Brand FANUC Injection Unit Screw diameter 32 mm Clamping Unit Clamping force 1250 KN Nsdpfjwwm Shsx Afrsli Opening stroke 350 mm Size of mold platens 660 mm × 610 mm Additional Equipment Equipment: Robot Wittman W818 (2015) 8000 € extra This FANUC α-S100A was manufactured in 2017. It is an electrical injection moulding machine, ideal for precision plastic parts production. Consider the opportunity to buy this FANUC α-S100A electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding