Wire EDM Machine

FANUC RoboCut alpha C600iA

Condition: repair required (used), Year of construction: 2004, functionality: limited functionality, workpiece weight (max.): 800 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, Equipment: fridge, We are selling a Sodick wire erosion machine. It was purchased new in 2004 and was in operation until 2023. The machine needs to be replaced with a screen, seals,... a major service is required. The machine is located in the Sodick demo center near Zagreb, we can provide all support: start-up of the line, installation, transport and official service. Caedpfx Abov Hw Dhe Tsa For more information, we are available:

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, X 800 mm H 460 mm Z 510 mm Control FANUC Caedpjv Th E Asfx Ab Tea Chip Conveyor Including 4-axis Rotary table.

Condition: ready for operation (used), Year of construction: 2011, General Data Codpow Spv Rjfx Ab Tjaa Measurements width 1630 mm Measurements depth 2410 mm Measurements height 1675 mm Machine weight 3100 kg Control Unit Brand FANUC Main Drive Spindle speed range 6000 rpm Spindle motor power 15 / 11 kW Number of axis 2 Movement X-Axis Movement 170 mm X-Axis Rapid Traverse 30m/min Z-Axis Movement 510 mm Z-Axis Rapid Traverse 36 m/min Tools Number of station 12 This DOOSAN LYNX 200 LM Horizontal Turning Machine was manufactured in 2011. It features a swing over bed of 510 mm and a maximum turning diameter of 320 mm. The spindle supports a maximum speed of 6000 rpm, and the machine includes a 12-station turret with live tooling capabilities. Ideal for precision turning and milling operations. Contact us for more information about this machine. Application Types Turning

Condition: like new (used), Year of construction: 2017, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,250 mm, workpiece length (max.): 975 mm, empty load weight: 4,200 kg, Equipment: cooling unit, Fanuc Robocut C800iB - Model Year 2017 Fanuc's largest wire EDM machine AWF Automatic Wire Threading Turkish Control Unit - Touchscreen Fanuc Link i Remote Control Water Cooler Core Joint Part Holding Twin Servo Wire Tension Control Thermal Compensation Fanuc New Series 15" Touchscreen and Turkish Control Unit Able to make 5 cuts with the standard new power supply and achieve a surface quality of 0.30 microns. New lower head design and lower head tube protected by bellows. Twin Servo wire tension control ensures consistently stable wire tension during cutting, resulting in more precise cuts. Advanced AWF2 system allows for wire threading at the point of breakage. Program transfer and remote control via CF card, USB, RS232C, and Ethernet Standard Features Maximum throughput workpiece clamping (mm): 1250 x 975 x 500 mm Maximum workpiece weight (kg): 3000 kg X-Y axis travel (mm): 800 x 600 mm Z axis travel (mm): 510 mm U-V axis travel (mm): 200 x 200 mm Cedpfjxfaqksx Ab Tjaa Maximum cutting angle (°/mm) std. Maximum cutting angle (°/mm) opt.: ±30° / 150 mm : ±45° / 70 mm Minimum axis travel (mm): 0.0001 Wire diameter (mm): Ø 0.1 ~ Ø 0.30 Maximum wire weight (kg): 16 kg Footage (mm): 2900 × 3260 mm Machine weight (KG): 4200 kg Control unit: FANUC

Condition: used, Wire erosion FANUC ROBOCUT ALPHA-0iE Cajdpfsxqrqajx Ab Tea

Condition: excellent (used), Year of construction: 2017, Max. turning length: 1,214 mm Max. turning diameter: 420 mm Chuck size: 305 mm Max. swing over bed: 700 mm Travel distances - X-axis: 280 mm - Y-axis: 120 mm - Z-axis: 1,390 mm Rapid traverse - Rapid traverse X/Y/Z: 20 / 10 / 24 m/min Spindle - Bar capacity: 89 mm - Max. speed: 2,500 rpm - Drive power: 22 / 18.5 kW - Torque: 1,050 / 883.8 Nm Codew Tcvmspfx Ab Tsaa Turret - Tool stations: 12 - Driven tool stations: 12 - Tool holder: BMT-65 Accessories: • Box ways • C-axis • Y-axis • Air blow gun • Steady rest base • Manual steady rest, manufacturer RICHTER • Chip conveyor • Automatic tailstock and quill • Work light • Coolant tank capacity: 240 liters Connected load: 55 kVA Weight: approx. 7,800 kg

Condition: used, Year of construction: 2014, Very good condition! Cajdpfx Aboxca U Do Tsa Available immediately! Control: Fanuc Oi - TD Travel: X-195 mm, Z-660 mm programmable tailstock: via M function turning diameter: 254 mm tool turret: 12x coolant tank : 180L, 6 bar pump pressure electric handwheel: ,

Condition: new, Year of construction: 2023, The K’MX 920 CLEVER sliding headstock automatic lathe is designed for machining complex workpieces up to Ø 20 mm. The lathe is equipped as standard with two electrospindles with a maximum speed of 12.000 rpm each. With its nine axes, comb + turret on three axes and independent end unit, this machine is capable of having four tools in the material for an optimised cycle time. Codpfx Abek Dz Dij Teaa 9 linear axis 1 independent rack with 10 positions Cross-section of outer tools 12 x 12 mm Turret number of stations 12

Condition: good (used), Year of construction: 2018, Ref. -No.: 10531 Manufacturer: HONOR SEIKI Type: VL - 400CM Year of construction: 2018 Type of control: CNC Control: Siemens SINUMERIK 840D Storage location: Halberstadt Country of origin: Taiwan Machine-No.: 79XXX C-Axis: Yes C-axis speed: 50 - 2250 RPM Turning Height: 2370 mm Table Diameter: 4000 mm Rapid Travel Speed X-Axis: 10 m / min Rapid Travel Speed Z-Axis: 10 m / min Rotate table rotation speed: 1 - 85 RPM Max. Workpiece Weight: 30 kg Max. Turning diameter: 4 mm Distance between faceplate and crossbar support: 820-3320 mm Work feed: mm / min Number of tools in the chain magazine: 24 Crossbar adjustment: 300 x 300 mm Spindle motor drive: AC60/75/100 kW Servo motors (X/Z axes): 5,5 / 5,5 kW Machine length: 9 mm Machine width: 7000 mm Machine Height: 8000/9100 mm Cedsxxpblopfx Ab Teaa Weight Of The Machine Ca.: 115 t Further information: - 2-stage gear change - ATC (Automatic Tool Change) 16/20/24 - Tool size 25 x 32 x 40 - Driven tool motor AC15/18.5 Machine is still in production and can be inspected by appointment.

Year of construction: 2011, operating hours: 5,477 h, condition: ready for operation (used), General Data Measurements width 1863 Measurements depth 4600 Measurements height 1863 Machine weight 6000 Control Unit Brand FANUC Model I series Main Drive Spindle speed range 3500 Number of axis 3 Media Chip conveyor Yes Additional Equipment Caedexpyx Aspfx Ab Toa Tool holders 2+2 driven tools Automatic tool measurement Oil catcher Oil mist filter (Losma) This 3-axis DOOSAN Puma 2600M was manufactured in 2011. A robust horizontal turning machine featuring a Fanuc I Series control system, it offers a maximum turning diameter of 376 mm and a length of 760 mm. Spindle speed reaches up to 3,500 rpm. Includes chip conveyor, tool holders, and driven tools. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma 2600M machine we have for tact us for more information. Application Types Turning