Component

Fanuc A06B-6117-H206 SN:V06223252 - ! -

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg Djdpjg Ezarsfx Ac Heck *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 1980, condition: good (used), A used, very well-maintained cycle-controlled lathe from Weisser Heilbronn with a SIEMENS control system. Distance between centers 2000 mm Center height 295 mm Swinging diameter over bed 600 mm Swinging diameter over cross slide 260 mm Swinging diameter in the crotch 800 mm Total length of the crotch 375 mm Bed width 450 mm Travel of X-axis 350 mm Travel of Z-axis 1850 mm Dcedpfogyy I Aox Ac Hjk Spindle nose DIN 55022, size 8 Spindle speed, number 18, 14 – 1400 rpm Spindle bore 71.5 mm Diameter of front bearing 110 mm Feed range 0.01 – 40.95 mm/rev Rapid traverse 8 m/min DC drive 15 kW 400V 50Hz Max. permissible torque on the spindle 2500 Nm Tailstock quill 80 mm Quill stroke 250 mm Internal taper in quill MK 5 Length x width x height Machine weight 5500 kg Accessories: Tailstock Pneumatic three-jaw chuck with replaceable jaws, 315 mm Quick-change tool holder "MULTIFIX" in front of the center, size "C" Four-position turret behind the center Tool holder Coolant system Follow rest, pneumatically actuated Technical data and dimensions: Subject to change without notice. Video conference via WhatsApp possible after scheduling an appointment.

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 495 mm, travel distance Z-axis: 780 mm, spindle motor power: 37,000 W, spindle speed (max.): 2,000 rpm, total height: 3,636 mm, total width: 2,860 mm, controller manufacturer: FANUC, controller model: 0i-F Plus iHMI-Touch, product length (max.): 2,005 mm, number of axes: 3, This 3-axis DN SOLUTIONS PUMA V8300MR vertical turning machine was manufactured in 2023. As new, showroom model. It features a maximum turning diameter of 830 mm and a turning length of 690 mm. The machine is equipped with a powerful spindle offering 2,592 Nm of torque and a rapid traverse of 20 m/min. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA V8300MR machine we have for sale. Contact us for further details. • Condition: Showroom machine, like new • Chuck size (main spindle): up to 15" (380 mm) (not included) • Bar capacity: 60 mm • Rapid traverse (X/Z): 20 / 20 m/min • Spindle torque: 2,592 Nm • Max turning diameter: 830 mm • Max turning length: 690 mm • Tool stations: 12 • Tool holder: BMT 75P • Guideway type: Box guideway • Monitor size: 19" • Main features: • Powerful, very compact vertical turning center • Standing spindle; optimal crane loading and operator accessibility • Extremely rigid cast bed • High torque main spindle • Compact machine design • Optionally driven tools with high torque (possible) • High-quality, robust box guideways • Rapid traverse up to 20 m/min Additional equipment • Coolant pump, 10 bar • Oil skimmer • 3-color warning light • Optional: Chip conveyor (hinge belt conveyor). Price on request • Machine is delivered with standard basic package: Turret fully equipped, base holder included. Dcsdpfx Ajyrr Rwjc Hjk Technical Specification Driven Tools No

Condition: used, Year of construction: 2003, WORKING CAPACITY SWING OVER BED: 1,000 mm Dcjdpfx Aeqgf Ayec Hjk MAX TURNING DIAMETER: 850 mm MAX TURNING LENGTH: 850 mm SPINDLE CENTER HEIGHT: 1,200 mm MAIN SPINDLE SPINDLE NOSE: ASA A2-11 BAR CAPACITY: 110 mm SPINDLE SPEED RANGES: 2 SPINDLE SPEED: 5-1,800 RPM AXIS FEEDS X-AXIS TRAVEL: 470 mm Z-AXIS TRAVEL: 850 mm RAPID TRAVERSE: 20 m/min FANUC SERIES 21i-TB

Condition: refurbished (used), Roller hearth furnace, make Mahler type: RHEE 500/100/3000-6500 Dcjdpfxjfc Hbdj Ac Hsk refurbished: 2016 max. charge weight: 40 kg/m nominal throughput: 288 kg/h clear roll width: 500 mm clear height above roll: 100 mm furnace length: approx. 22100 mm working temperature: - Warm-up zone: 800-1000°C - High temperature zone 800-1250°C heating: electric connected load: 400 kW gases used: nitrogen, hydrogen

Condition: used, centre height: 140 mm; table size: 150x1050 mm; longitudinal path (manual): 600 mm; transverse path: 230 mm; height adjustment: 250 mm; 2 engine speed: 1500-3000 rpm; Djdpfxscbhl Nj Ac Hsck 6 grinding spindle speed: 2000-6000 rpm; biggest grinding wheel diameter: 250 mm;

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, load capacity: 180 kg, arm reach: 2,900 mm, Model: KR210 (L180)-2 2000 Payload: 210kg or 180kg Arm Reach: 2700 mm or 2900 mm Condition: Used & Tested & Painted Year: 2008 (Multiple Options Available) Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant Dedpsq Hfahjfx Ac Heck As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs.

Condition: good (used), Year of construction: 1999, functionality: fully functional, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 bar, gear milling option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Bjsvkhv0lno We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage. Dodpfevta Rkox Ac Hock

Condition: new, functionality: fully functional, Year of construction: 2025, warranty duration: 60 months, Effective Tube Cutting Length: 6500mm Laser Output Power: 6000w/3000w/2000w/1500w Effective Round Tube Cutting Diameter: Φ20-360mm Effective Square Tube Cutting Diameter: □20*20-□254*254mm Edge Length: 20-300mm Outer Circle Diameter: ≤360mm Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz Dodpfeg D Nzijx Ac Heck 1.Bigger than Bigger The maximum cutting diameter of T series is 30%longer than the mainstream products in the market ; The maximum cutting weight is 100% heavier than the mainstream products in the market. 2.Chuck position control, torque control function The position control CNC self-centering chuck with independent intellectual property rights can automatically clamp material according to the input tube size; Position monitoring in torque mode to ensure that the thick tube is not loosened and the small tube is not deformed;Brand new dust-proof structure, long-lasting use without lagging. 3.Edge-seeking, center-finding Brand new function of edge-seeking, center-finding. Optimized edge-finding method and algorithm, higher cutting precision and stability

Condition: good (used), Year of construction: 2003, functionality: fully functional, For sale used Mori Seiki VL-25A1 in excellent condition. Year: 2003 Dcsdpfxeuf Tb Ue Ac Hek Mori Siki Mori Siki Mori Siki Mori Siki, 2003. Delivery parity: EXW Székesfehérvár. We can assist in disassembling and assembling the machine on request.