Axle stand

FALKEN SLB 5 to. / H 800 mm

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut Rodpey Nd Hyjfx Apdjch • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Condition: good (used), Year of construction: 2019, functionality: fully functional, Table surface: 7,500 x 2,500 mm Positioning speed: 40,000 mm/min Positioning accuracy: = 0.06 mm/min Repeatability: 0.05 mm/min Machine weight approx.: 2,300 kg MicroStep CNC cutting system of the MG series with the following features: - Hypertherm® XPR170™ plasma power source with automatic OptiMix™ console - Plasma rotator for weld preparation - Fully automatic oxy-fuel torch - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Steel portal driven and stiffened on both sides for a clear and precise cut - AC servo motors from Panasonic for high drive power and excellent dynamics - Durable and low-maintenance planetary gearboxes - User-friendly machine control - High reliability and long service life, even in three-shift operation - MicroStep iMSNC® machine control with MMI console and 24" touchscreen - iMSNC® module | User management - iMSNC® module | Expert system - iMSNC® module | Automatic calibration of mechanical sensing - iMSNC® module | Visualization of wear parts - iMSNC® module | Assistant for loading CNC programs - iMSNC® module | Management of cutting programs (MRP) - iMSNC® module | EcoInfo - iMSNC® module | MachineInfo - iMSNC® module | Assistant for service and maintenance operations - USB 3.0 connection for storage media - Remote maintenance module MicroStep RemoteDiagnostics® - Remote maintenance access via TeamViewer - Two LCD control units on the portal - Laser pointer with automatic offset transfer - Hypertherm® XPR170™ plasma power source Rodjzwl Dmspfx Apdech - Industry-leading cut quality - X-Definition - Advanced HyDefinition technology - Automatic gas console | OptiMix™ - CNC interface for the Hypertherm® XPR170™ Connection to the CNC control - Module for automatic power control of the Hypertherm® XPR170™ - Electrical and mechanical torch sensing - Remote activation of plasma power source - Double-sided cable protection (collision protection) of the portal bridge via emergency stop - Extraction table system with oscillating conveyor OXYtrac 2580 HD Main components and dimensions: 1 Table consisting of: 4 table elements WxLxH (mm) 2,600 x 2,080 x 950 Total support area: WxLxH (mm) 2,600 x 8,320 x 950 Contiguously usable working area per table: Vertical cutting: WxL (mm) 2,500 x 8,000 Bevel cutting: WxL (mm) 2,000 x 8,000 Table width (outer): W (mm) 2,830 2 Oscillating troughs L (mm) approx. 8,900 Cutting processes and associated extraction capacity: 1x Plasma max. 170 Amp., bevel cutting 1x Oxy-fuel max. 100 mm workpiece thickness regularly 200 mm workpiece thickness occasionally

Condition: new, Year of construction: 2025, cutting diameter 650 mm saw band length 8830x67x1,6 mm cutting width 1,6 mm Control halbautomatisch Cutting area - square 650 x 650 Cutting area - flat 650 x 1300 total power requirement 7,5kW / 3100 Nm weight of the machine ca. 5100 kg dimensions of the machine ca. 2100x1550x4450 mm The KSY 650 X 1300is a semi-automatic and column-guided horizontal bandsaw. Optional Specifications - Motorized System For Roller Table Rcsdpfey S Duiex Apdjh - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: used, Year of construction: 2007, machine/vehicle number: 0102-260009, Voortman VB 1050 Horizontal Band Saw Voortman VB 1050 CNC miter band saw with a length measurement system and a comprehensive transport system for processing structural steel sections. The used Voortman VB 1050 horizontal band saw is a high-performance CNC-controlled miter band saw for the precise and cost-effective machining of large steel sections in the steel construction and steel trading industries. This robust band saw is suitable for profile widths ranging from 60 to 1,050 mm and profile heights from 10 to 450 mm. With its infinitely variable, CNC-controlled miter adjustment to the left and right up to ±60°, it enables flexible straight and miter cuts on steel beams and various profile cross-sections. Technical Features and Equipment A key design feature of the Voortman VB 1050 is the movable saw table, which moves in sync with the saw blade’s position. This prevents the saw blade from colliding with the table structure during miter cuts. If necessary, the table lowers automatically to ensure unobstructed material transport. The machine is equipped with a Beckhoff CNC control system that allows the desired cutting angles to be programmed and precisely positioned. The robust machine design and the saw blade dimensions of 9,550 × 54 × 1.6 mm enable reliable machining even of large-dimension steel profiles. The equipment includes a length measurement system with a movable measuring carriage and a stop plate on the discharge side. With a maximum measuring length of 19,200 mm, the system is particularly well-suited for machining long steel beams. Technical Specifications – Voortman VB 1050 Machine Type: CNC Horizontal Mitre Band Saw CNC Control: Beckhoff Profile Width: 60–1,050 mm Profile Height: 10–450 mm Cutting range at 90°: 450 × 1,050 mm Cutting range at ±45°: 450 × 725 mm Cutting range at ±60°: 450 × 470 mm Mitre adjustment: Up to ±60° on both sides Mitre positioning: CNC-controlled, infinitely variable Band saw blade dimensions: 9,550 × 54 × 1.6 mm Maximum profile length: 19,200 mm Length Measurement System: Movable measuring carriage with stop plate Rsdpoyr Hp Iefx Apdech Roller conveyor length: 22,000 mm Machine weight: approx. 8,500 kg without accessories Applications The Voortman VB 1050 is particularly suitable for steel construction companies and steel distributors that process large steel sections with varying cutting angles. The combination of CNC-controlled miter adjustment, a large cutting range, and a long length measurement system enables flexible use for both one-off jobs and recurring cutting tasks.

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, year of last overhaul: 2024, Well-maintained drilling machine for sale due to expansion; it was also overhauled in 2024 and has been in our inventory since 2024. Rcedpfszhby Sex Apdoh

Year of construction: 2004, condition: good (used), Support stand, assembly stand, steel stand, welding table, assembly table, work stand, heavy-duty support stand, mobile stand, support stand, trestle stand, support stands -Support stand: Steel stand with spring-loaded chassis, 4x folding platforms -Height: 1910 mm Redpfey N Dczsx Apdsch -Load capacity: 15 tons distributed load -Number: 2 axle stands available -Price: for 2 pieces -Dimensions: 1310/1915/H1910 mm/piece -Weight: 263 kg/piece