Welding rotating device pivoting

Ess DTH 120

Condition: used, Container turning device, welding turning device, welding turning device, welding device, welding turning table, welding turning and tilting table, welding turning device -Table is: tiltable -Clamping diameter: 450 mm -Drive: 0.2 kW -Speed: 0.08 - 2.4 rpm -Load: 120 kg -Control: PS3E -Foot switch -Dimensions: 520/450/H475 mm Kedpfx Ajd Im S Ejh Nell -Own weight: 110 kg

Condition: excellent (used), Here we offer Polychromix Phazir NIR spectrometer. Portable Near Infrared Analyzer Model: 1624 Specifications Spectral range: 1600-2400 nm. Pixel pitch 8nm Optical resolution 11nm Kedpfen Arm Tjx Ah Njll Scattered light

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Kledowki Apepfx Ah Njl Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A4 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 430 Sawing capacity flat 90 430 x 430 mm Feed range 0 - 600 mm Multi-feed range 0 - 9999 mm Min, saw length 35 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length Klsdpfeu R R Avsx Ah Njl 4800 mm width 2200 mm Height 2200 mm weight 5200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: new, Year of construction: 2023, Welding turntable, tank turning device 6000 Kg load capacity Didital display with foot remote control diameter from 180mm to 3500 mm drive rollers diameter 300mm dimensions: length 1900mm x width 470mm x height 390mm Speed infinitely variable 200 - 1800 mm / min. Kodpsk Adl Hofx Ah Noll

Condition: new, ELMAG Portable Powerstation ENERGY 2400, LiFEPO4 battery with 2232Wh ENERGY 600 - 2400 The new ENERGY series comprises 4 performance sizes of portable power stations for a mains-independent power supply and emergency power supply for your consumers. The extensive range of applications covers all areas of use. Whether for camping, at festivals, as a power source for sales stands or as a self-sufficient emergency power solution in the event of a blackout, the ELMAG Powerstations are always your reliable companion. Display - Battery capacity in % and segments - Remaining runtime - Power output - Power consumption - Output status - Symbol display for protective function Features Outlets: - 4x Schuko 230 Volt - 1x 12V KFZ 10 A - 1x 12V round 10 A - 2x USB-C 60 W - 1x USB-A 5V 2 A - 3x USB-A QC3 Inputs: - 2x 7909 12V - 45V - 2x ANDERSON 12V - 45V - 1x 12 KFZ 10 A LED light 7W Digital display Protection class IP21 Protective functions: - Deep charge - overvoltage Kedpfx Ahjt H E Iqs Nsll - overcharge - short circuit - Overtemperature - Undertemperature 2x mains adapter 200W included 1x car charging cable included ADVANTAGES Lithium iron phosphate battery (LIFEPO4) for maximum safety and durability Also ideal for operation in high ambient temperatures High cycle stability > 2500 cycles 3 charging options: Solar, 230V and 12V Intelligent battery management system with extensive protection functions against undervoltage, overvoltage, overheating, short circuit and overcharging Extensive connection options: Schuko 12V DC, USB-A, USB-C etc. Digital display with detailed status monitoring Integrated MPPT solar charge controller Simultaneous charging and discharging possible Internal lighting with SOS function TECHNICAL DATA Battery type LIFEPO4 Battery capacity 2.232 kWh Voltage type pure sine wave Dimensions LxWxH 425x275x315 mm Weight 25 kg Maximum power 1~230V 5000 W Continuous power 1~230V 2400 W Maximum charging power 400 W

Condition: used, Year of construction: 2009, cutting diameter 15 - 560 mm 560 x 630 mm dimensions of saw-band 7.400 x 54 x 1,60 mm Control KASTO material feed - single 900 mm multiple feeding length max. 9.999 mm cutting length min. 6,00 mm sawing motor 5,50 kW cutting speed 13 - 127 m/min height of material-table 700 mm total power requirement 12,00 kW weight of the machine ca. 6,00 t Klsdpevxwkfsfx Ah Nel dimensions of the machine ca. 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control; frequency-controlled saw band drive; chip conveyor; infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m; Machine can be inspected under power.

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Mot. tank-boiler turning device with rail trolley Technical data: - Total payload driven + travelling unit 40000 kg. - payload per vessel device 20000 kg - workpiece diameter approx. 500 - 3500 mm - Centre distance of the support rollers adjustable via trapezoidal thread spindle - roller diameter 500 mm - roller width 150 mm Klsdpfehcnhmox Ah Nol - driven unit with drive on both sides - infinitely variable rotational speed - manual remote control for Re- and Li.-run - drive 400 V - Both units are mounted on rail trolleys - space requirement with running unit approx. W 3800 x H 1150 x D 1350 mm - Space requirement with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight attached unit approx. 2500 kg - Weight with running unit approx. 1800 kg

Year of construction: 2020, condition: new, The Sapphire is the optimum solution for heavy industry for material thicknesses up to 200 mm. It enjoys great popularity with various production companies - often in three-shift operations - and all areas of application where stability, efficiency and process reliability are particularly important. Thanks to the high-quality equipment, the system is a universal tool for the highest demands and a helpful instrument for process optimization. Used in more than 400 industrial plants worldwide, the Sapphire cutting system proves itself every day. Equipment - Harris oxy-fuel burner - Kjellberg plasma torch with e-touch - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for easier positioning Klsdpfof Ak N Rex Ah Nel - CamConcept Finest Cut V 7 - Suction table 3000 x 6000 mm - Suction unit PFC 6 incl. suction pipes - Delivery, installation and commissioning Main features - High dynamics and precision in automated 2D & 3D cutting of sheets, tubes and profiles - Sheet metal processing up to a material thickness of 200mm - Extensive cutting database for ideal user-friendliness - Designed for highest demands under the most difficult conditions in three-shift operation General technical data Drive: Servo AC Available working widths: 2.000-7.000 mm Available working lengths: from 1.500 mm positioning speed: 25,000 mm/min cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy

Year of construction: 2020, condition: as good as new (ex-display), 1x drive unit with trolley 1x travelling unit with trolley and height adjustment -Centric roller block adjustment with hand crank. -Manual height adjustment, locking with socket pin - height difference 0-350 mm adjustable - Load capacity: 2.500 kg / unit - Component diameter: 200mm - 2.000mm - Rollers: PUR wheels - dim. length/width: approx. 1.900mm x 460mm - Chassis track width: 1435mm - turning speed: 0 - 2,000 mm/min - Operation: hand remote control and foot switch Kedpfxjfxgrdo Ah Njll