ERCOLINA Megabender TOP 030

ERCOLINA Megabender TOP 030

Year of construction: 2008, condition: good (used), machine/vehicle number: 431808, Lg.No. 18177 Hydr .flat profile and bar shear with notching device and hole punching machine Technical data: - Flat steel shear cuts up to 375 x 10 mm - 220 x 20 mm - section steel shears - cuts L-steel at 90° up to 130 x 13 mm - steel bar shears - cuts round steel up to 45 mm - square steel up to 45 mm - notching device - with square notcher 100 x 42 x 10 mm - punching machine - punching force 600 KN - with stop table - throat 300 mm - punching in steel up to 28 mm Ø in 15 mm - or 34 mm Ø in 12 mm - manual length stop - drive 400 V / 4 kW Pgsdpfsmidyiox Ahvsi - space requirement approx. W 600 x H 1550 x D 1500 mm - weight approx. 1300 kg

Condition: used, Year of construction: 1999, tube diameter bis 60 mm weight of the machine ca. 1,8 t Psdpfjvvnm Ssx Ahvsgi

Condition: good (used), functionality: fully functional, Year of construction: 1998, bending radius (max.): 600 mm, mandrel length: 1,200 mm, wall thickness: 8 mm, Transfluid DB 40100ST Mandrel bending machine Tube bending machine The above machine is a mandrel bending machine designed exclusively for the production of tubes and profiles with an outer diameter of 40-100 mm, max. 110x5 mm with a max. wall thickness of 8 mm or for the processing of solid materials with an outer diameter of up to 70 mm. Pipe push-on length/usable length: 1200 mm Radius range max:600 mm Pgodpfx Aor H Havohvoi Bending height:1200 mm Machine data Length:4000 mm Width:2600 mm Height:1400 mm Weight:9000 kg

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. 7.5 KW Podpfxjxaxr Nj Ahvogi 8 Bar 1000 lts/min Very low running hours - 1351 run hours Complete with three filter set

Condition: used, Year of construction: 2008, sheet width 3100 mm plate thickness 6 mm rear stop 1000 mm cutting angle 1,2 ° down holder 14 Stk no. of strokes 18 Hub/min oil volume 150 l total power requirement 11 kW dimensions of the machine ca. 3900 x 1900 x 1600 mm weight 5500 kg Equipment: Pgodjvuz Tpepfx Ahvsi - Hydraulic swing cut shears - ELGO control system - Electric backgauge 1000 mm - Manual cutting gap adjustment - Cutting length limitation - Ball rollers in the table - 2x front support arms - 1x front side stop with scale - Front finger guard, hinged - Rear safety device (protective grille + light barrier) - Foot switch - Operating instructions

Year of construction: 2006, condition: ready for operation (used), A welding cell including robot and welding machine is available. Table dimensions X/Y: 1800mm/900mm, max. workpiece height: 800mm, switching hours: 5250h, operating hours: 1244h. 1) Robot Fanuc ARC Mate 100iBe, year of manufacture: 2006, payload: 6kg, max. reach: 1373mm, repeat accuracy: +/-0.08mm, weight: approx. 238kg. 2) Welding machine Fronius Magic Wave 4000, year of manufacture: 2006. On-site inspection is possible. Pgodpfx Aoviv Dlohvji

Condition: used, Year of construction: 1989, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Pgedpjru Un Hjfx Ahvei Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm side-clamping surface: 200 (Höhe) mm weight 1518 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Distance between holes in side wall 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Pgsdpfx Ahsw U U N Uovei Special set - including 28 tool set 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment - incl. 28 tool set 3: + 10x 280610.N clamp + 6x 280630.N clamp + 4x 280648.1.N prism + 24x 280510 bolts + 4x 280740 magnetic bolts + 8x 280410.N stop + 8x 280420.N stop + 6x 280110.N angle + 2x 280152.N angle + 2x 280162.N angle + 1x 280166 + 67.N angle + 1x 283999 accessory set

Condition: new, tube diameter 60.3 x 4.5 mm ST tube diameter 60.3 x 5.4 mm ALU Psdpox Urtlefx Ahvogi tube diameter 2" x 3.91 mm GAS bar material - diameter 35.0 mm revolutions per minute 2.0 U/min bending radius min. 10.0 mm bending radius max. 270 mm external diameter min. 5.0 mm external diameter min. 1/8 Zoll voltage 230 V total power requirement 1.5 kW weight 76.0 kg range L-W-H 302 x 243 x 674 mm Equipment: - mandrel-less tube bending machine - Model "M" = ELECTRO-HYDRAULIC SINGLE-PHASE - high performance and compact design - completely hydraulic machine - bends 210° without the need to catch up - no electronic control - Ercolina patent n. 102017000142179 - control of the bending angle via adjustable angle scale - mobile machine base BENDING SEGMENT AVAILABLE AT AN EXTRA CHARGE

Condition: good (used), functionality: fully functional, Year of construction: 2012, For sale: 1 piece used hole punch Manufacturer: Geka type: Puma 110 2HI Punching force: 110t incl. documentation Dimensions see type plate Pgsdeuihvzopfx Ahvji Machine can be inspected in our warehouse in 09599 Freiberg.