Victory 330/90 Tech

ENGEL

Condition: excellent (used), Year of construction: 2015, clamping force: 9,000 kN, Equipment: documentation/manual, _ENGEL DUO 1800H/1800M/900 WP 2FCLS – Full Technical Parameters_ Year of manufacture: 2015 Control system: CC300 Clamping force: 9,000 kN (900 t) QMC system: Bolt Hole _— Clamp Unit —_ Min. mould height: 1,300 mm Max. mould height: 2,100 mm Platen size (H × V): 1,850 × 1,810 mm Tie-bar spacing (H × V): 1,420 × 1,170 mm Hjdpfoz Az Iasx Agtefl Opening stroke: 1,800 mm Location ring – fixed platen: Ø 250 mm Location ring – moving platen: Ø 250 mm Max. total tool weight: 21,000 kg _— Injection Unit 1 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 180 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Injection Unit 2 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 184 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Mould / Peripherals —_ Fixed platen cores: 1 Moving platen cores: 1 + 4 on rotary table Hot runner zones: 16 Sequential control zones: 48

Condition: excellent (used), Year of construction: 2004, Engel Victory 80/45 Tech Hedpfx Ajh Rawbsgtjfl Closing force: 45 tons, without core Screw diameter: 22 mm Year of manufacture: 2004 Control unit: 200

Condition: ready for operation (used), Year of construction: 2018, operating hours: 54,823 h, clamping force: 7,000 kN, screw diameter: 80 mm, injection weight: 1,916 g, total width: 2,780 mm, total height: 2,320 mm, overall weight: 20,000 kg, controller manufacturer: ENGEL, controller model: CC300, product length (max.): 8,200 mm, Hydraulic injection moulding machine manufactured in 2018. This ENGEL duo 5160/700 features a clamping force of 7000 kN and platen dimensions of 1510 x 1440 mm. The machine includes a screw diameter of 80 mm and a shot volume of 2061 cm³. If you are looking to get high-quality injection moulding capabilities, consider the ENGEL duo 5160/700 machine we have for sale. Contact us for further details. • Operating hours: 54,823 h • Clamping unit: • Platen dimensions: 1,510 x 1,440 mm • Distance between tie bars: 1,000 x 960 mm • Min. mould height: 450 mm • Max. mould height: 950 mm • Max. opening width: 1,850 mm • Injection unit: • Injection unit size: 5160 Hfedez Az Erjpfx Agtsl • Shot volume: 2,061 cm³ • Max. injection pressure: 2,300 bar • Electrical and hydraulic: • Hydraulic pump motor power: 109 kW • Heating power: 40.7 kW

Condition: used, Year of construction: 2017, operating hours: 21,000 h, clamping force: 100 kN, displacement volume: 46 cm³, injection pressure: 2,400 bar, overall weight: 4,500 kg, screw conveyor diameter: 22 mm, terms of delivery: FCA Pegnitz delivery time: on request Hfjdpfx Aozz Aw Sjgtol terms of payment: 100% prior to delivery

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Hjdpfx Agjh Nypfstsfl

Condition: used, Year of construction: 2024, MACHINE PROFILE: 3,800 kN (420 US tons) IMM ===== Machine ID: • Injection Unit: 265 • Clamping Unit: 380 • Weight: 21,300 kg Clamping Unit Specifications: • Force: 3800 kN (388 tons / 420 US tons) • Tie-bar Spacing: 830x830 mm • Platen Size: 1190x1190 mm • Stroke (Open/Eject): 700 / 210 mm • Ejector Force: 90 kN • Mold Height (Min/Max): 300 / 750 mm (+800 option) • Max Mold Weight: 3.8 tons Hfodpfx Agezzv Tgotjl • Dry Cycle: 2.3s / 500mm Injection Unit Specifications (By Screw: 25 / 30 / 35 mm): • L/D Ratio: 24 / 24 / 20 • Capacity: 74 / 106 / 144 cm³ • Rate: 98 / 141 / 192 cm³/s • Recovery Rate: 10 / 15 / 22 g/s • Pressure: 2700 / 2700 / 2000 bar • Stroke / Speed: 150 mm / 420 rpm • Nozzle (Stroke/Force): 305 mm / 40 kN • Heating Capacity: 9.2 kW

Condition: good (used), Year of construction: 2005, operating hours: 76,988 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 99 cm³, plate length: 600 mm, plate height: 670 mm, total length: 4,050 mm, total width: 1,930 mm, total height: 2,200 mm, overall weight: 5,200 kg, Equipment: documentation/manual, ENGEL Victory 200/80 Tech Stock No.: 503561 Manufacturer: ENGEL Type: VICTORY 200-80 Tech Control System: CC100 Year of Manufacture: 2005 Operating Hours: 76988 h Technical Data - Clamping Side Clamping Force: 800 kN Platen Size h x v: 670 x 600 mm Minimum Mold Height: 250 mm Maximum Mold Height: 700 mm Opening Stroke: 450 mm Ejector Stroke: 100 mm Ejector Force: 40 kN Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Tool Weight: 675 kg Technical Data - Injection Side Screw Diameter: 30 mm Injection Volume: 99 ccm Injection Pressure: 1450 bar Screw Length: 20 l/d Screw Stroke: 140 mm Plasticizing Rate: 17 g/s PS Free Injection Flow Rate: 150 g/s PS Number of Heating Zones: 4 Nozzle Length: 200 mm Dimensions & Weight Machine Dimensions L x W x H: 4.05m x 1.93m x 2.2m Total Weight: 5200 kg Equipment Hsdpfx Agez Ayttetofl Screen text: German CEE socket 16A Core pull hydraulically 1x Machine including conveyor belt Machine including handling system Machine with water manifold Machine without material hopper Leveling elements Schuko socket 10A Technical Data - Handling System Machine Type: Linear handling system Manufacturer: Engel Control System: ER-HLI 31 VC Year of Manufacture: 2005 Handling System Weight: 2 kg Screen Text: German Total Weight: 250 kg

Year of construction: 2012, condition: excellent (used), Alfa Laval Centrifugal pump Type LKH 85/240, 25,0 kW , Stainless Steel. Used! Good condition! Hfjdpfx Ajhck S Eogtel Inlet: 6" - Outlet: 6"

Condition: used, Year of construction: 2012, operating hours: 32,200 h, The machine offered is an ENGEL VC 200/40 Tech, manufactured in 2012. The machine is currently connected to the power grid. Technical specifications: Manufacturer: ENGEL Model: victory 200/40 tech Year of manufacture: 2012 Control system: ENGEL CC 200 Operating hours: approx. 32,200 h Clamping force: 400 kN / 40 t Screw diameter: 30 mm Injection pressure: 1,451 bar Displacement: 99 cm³ Platen size: 500 × 450 mm Tool height: 200 mm Opening stroke: 400 mm Max. platen distance: 600 mm Centering: 125 mm Ejector stroke: 100 mm Nozzle thread: M28 × 1.5 Smallest tool size: 280 mm Power: 15 kW Machine weight: approx. 2,900 kg Core pull: 1 Air ejector: 2 RSP: 3-part Design: tie-bar-less ____ Wittmann W702 picker / handling device Manufacturer: Wittmann Type: W702 Year of manufacture: 2012 Serial No.: 0000171976 Article No.: 7F00000506 X-axis: 100 mm Y-axis: 550 mm Z-axis: 90° Weight: approx. 52 kg Voltage: 105–250 V Current consumption: 1.6 A According to the available Wittmann documentation, the handling device has been refurbished. After completion of the work, a functional test and test run were carried out with the result "OK". _____ Cooling unit Manufacturer: aic regloplas GmbH Model: TAE EVO 081 Year of manufacture: 2006 Serial No.: 2200 086 152 Connection: 400 V / 3 Ph / 50 Hz Rated power: 11 kW Max. current consumption: 19 A Protection class: IP54 Max. operating pressure, water circuit: 6 bar Max. water temperature: 65 °C Refrigerant: R407C Refrigerant quantity: 5.5 kg Weight: approx. 331 kg _____ Scope of supply ENGEL victory 200/40 tech injection molding machine Wittmann W702 picker / handling device aic regloplas TAE EVO 081 cooling unit Inspection is possible by appointment. Dismantling and loading are the responsibility of the buyer! The machine is located in Bremen. _____ Subject to prior sale and errors in technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply; the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial customers and without warranty. Hjdpez Ap Imsfx Agtjfl

Condition: used, functionality: unexamined, Ferwood Code: RU0010431 - Manufacturer Code: GNM 5480-B4 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Hfodsv Iz Iaepfx Agtol

Condition: excellent (used), Year of construction: 1999, Clamping force: 25 tons Distance between tie bars: 270x270 mm Hfjdovl Skgepfx Agtsl Opening max: 275mm Min Mould height: 200 mm Mold platens size: 400 x 400 mm Screw diameter: 18 mm Injection volume: 20 cm3 Shot weight: 17 g Injection pressure: 2500 bar Working hours: 38.035 h

Condition: excellent (used), Year of construction: 2004, Engel INSERT 330H/90 Controll: CC100 Condition: funtional Vertical machine with Horizontal injection Rotary table diameter: 1100mm Clamping force: 90 ton Opening max. : 570 Opening min. : 270 Hfjdpfju Dbkdox Agtjl Platen size: 590x340 Screw: 40 mm Screw length: 160 mm Injection volume: 201 cm3 Injection pressure: 1230 bar Motor: 15 kw Weight: 5600 kg Height 2800 mm

Condition: good (used), Year of construction: 2002, functionality: fully functional, The machine is in good technical condition, testing can be arranged by prior agreement. Hedpfx Aez Ah Rgogtofl

Condition: used, Year of construction: 2005, operating hours: 70,000 h, functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, Offer-Details: Stock-No. 14171 Manufacturer Engel Type of machine ES 2050 - 400 HL Year 2005 Working hours 70000 Controlversion CC200 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 4000 kN Hsdpfx Ageu Awaletsfl Size of mould platens (h x v) 1400 x 1080 mm Mould height min 350 mm Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Ejector force 83 kN Injection unit: Screw diameter 70 mm Injection pressure 1482 bar Stroke volume 1155 ccm Shot weight (PS) 1040 gr. Injection rate 419 ccm/s Screw speed 183 1/min Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Dimensions and weights: Dimensions of the machine ca. 8,30 x 2,35 x 2,48 m Total machine weight 31200 kg Accessories: - Anti vibration pads - 2 x 24 zones water flower - Material hopper - degassing screw Additional Options: - Robot interface - 4 x hydraulic core pulls

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Hfodpfozt I Srox Agtel Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter