Unit + cylinder 330/35 mm

Engel

Condition: like new (used), Year of construction: 2015, clamping force: 1,200 kN, Engel E-Victory 170H/50V/120 combi (2015) 2k machine CC300 controll Clamping force: 1200 kN Mould min-max: 300mm Total tool max height: 800 mm plate size : 740 x 680mm Opening stroke: 505 mm Ejector stroke: 130 mm Ejector force: 39.8 kN Pump drive power: 15 kW Injection unit 1 Screw diameter: 25 mm Max. swept volume: 59 cm³ Screw speed max: 400 r/min Screw speed max (current): 400 r/min Injection rate: 109 cm³/s Injection rate (increased): 109 cm³/s Specific injection pressure: 2400 bar Specific injection pressure (increased): 2400 bar Injection unit 2 Fjdpfexyi Rvex Aalopg Screw diameter: 20 mm Max. swept volume: 25 cm³ Screw speed max: 450 r/min Injection rate: 104 cm³/s Specific injection pressure: 2400 bar Machine with conveyor. Working hours : 41.427 h Possible to buy robot Engel VIPER 20 Linear (Z=3320mm)

Condition: good (used), Year of construction: 2009, clamping force: 1,500 kN, Equipment: documentation/manual, Controll CC200 Fodoy Rn E Ajpfx Aaljpg Clamping force: 150 t Victory VC 1050/150 💉 INJECTION UNIT Screw diameter: 50 mm Screw stroke: 215 mm Max. injection capacity: 422 cm³ Screw speed: 230 min⁻¹ L/D ratio (3-zone): 20 Recovery rate (3-zone): 32 g/s L/D ratio (barrier): 24 Recovery rate (barrier): 44 g/s Injection rate (regen.): 211 cm³/s Injection pressure (regen.): 1955 bar Injection pressure (max): 2330 bar Nozzle stroke: 350 mm Nozzle contact pressure: 67 kN Heating wattage: 15,3 kW Heating zones incl. nozzle: 5 Type: Horizontal Drive: Hydraulic

Condition: used, Year of construction: 2015, Lot consists of: (1) Injection molding machine, Handling: Sepro Robotique | SR SUCCESS11 S3 Trans | 2014 Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Handling system 1x Conveyor belt Technical Details: Max. stroke (mm): 175.0 Measuring system: Incremental encoder Clamping system: Toggle (KH) Clamp force (kN): 1000 Injection servo: No Screw diameter (mm): 40.0 Fpsdpfsy N R N Uex Aalog Screw speed (rpm): 420 Heating zones: 4 Heating power zone 1 (kW): 4.23 Heating power zone 2 (kW): 3.00 Heating power zone 3 (kW): 3.00 Heating power zone 4 (kW): 3.00 Temperature control: J-type thermocouple Pressure sensor type: Diaphragm

Condition: ready for operation (used), Engel GNM 5440 motor 24 V SN:J33134 ,used, normal traces of use, 100% functional, scope of delivery according to photos Fodei D Hvbopfx Aalspg

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, Due to a company relocation in the cleanroom injection molding sector, I am offering for sale an ENGEL injection molding machine with only 11,300 operating hours, in like-new condition. The machine was originally intended for another NYPRO facility but is now available for sale. Fpedpewb Dl Tjfx Aalsg Attached you will find: • Current pictures of the machine • The order confirmation from ENGEL to NYPRO The original purchase price was approximately €330,000. The selling price is €79,500, crane included. Technical specifications can be provided upon request and are also listed in the documents below. Included in the price: disassembly of the crane onto two Euro pallets, removal of the machine from the cleanroom, and loading onto your truck with a 15-ton forklift. If you are interested or have any questions, please feel free to contact me at any time.

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Fodey Rqhajpfx Aalspg Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: used, Year of construction: 2018, Ser. No. 221921, Control system, Manufacturer: Engel, Type: CC300, Clamping force: 1,700 t, 2 injection units, rotary table, minimum/maximum mold installation height: 800 - 1,600 mm, tie bar spacing: 3,350 mm, clear opening width/height: 1,850 / 1,415 mm, 16 cascade units, 64 hot runners, hydraulic core pulls: 4 (fixed side) / 4 (moving side), screw diameter: 105 / 50 mm, shot weight: 4,050 / 410 g, operating hours: 22,401, machine weight: 75,400 kg, mold temperature control unit, Manufacturer: Oni, Type: Rhytemper FlexControl 32, 4x 8-circuit block modules 125 °C, 6-circuit block modules 125 °C, visualization unit, part extraction handling, Manufacturer: Engel, Type: Viper 60, year of construction: 2018, Ser. No. 221938, parts enclosure, discharge conveyor belt, mobile conveyor belt, Manufacturer: Engel, Type: BGR FB100 KMAT, year of construction: 2018, Ser. No. 2144098, length approx. 4,200 mm, width 1,000 mm, external temperature control unit and material dosing are not included in the scope. Damages: hydraulic hoses leaking. Fpedpfx Aaey I R Tqelsg

Condition: used, Year of construction: 2018, Serial No. 221920, Control unit, Manufacturer: Engel, Type: CC300, Clamping force: 800 t, 2 injection units, rotary table, minimum/maximum mold installation height: 500 - 1,100 mm, platen distance: 2,100 mm, clear opening (horizontal/vertical): 1,170 / 1,000 mm, 8 cascades, 48 hot runner zones, hydraulic core pulls: 2 (moving side) / 4 (fixed side), screw diameter: 80 / 60 mm, shot weight: 1,800 / 250 g, operating hours: 28,236, machine weight: 30,000 kg, mold temperature control, Manufacturer: Oni, Type: Rhytemper FlexControl 30, 3x 8-circuit block modules 125 °C, 6-circuit block modules 125 °C, visualization unit, part handling unit Manufacturer: Engel, Type: Viper 20, Year of manufacture: 2018, Serial No. 221937, conveyor belt parts enclosure, belt conveyor, Manufacturer: Engel, Type: BGR FB100 KMAT, Year: 2018, 2102958, L/W approx. 3,500 x 800 mm, external temperature control unit and material dosing not included in the scope of supply. Fpsdpfjy I R Inex Aalog

Condition: used, Year of construction: 2018, Serial no. 221903, control system, manufacturer Engel, type CC300, clamping force 400 t, installation height 450 - 950 mm, platen spacing 1,450 mm, 8 cascade valves, 24 hot runner zones, hydraulic core pulls 2 (DS) / 4 (AS), screw diameter 60 mm, shot weight 750 g, operating hours 30,738, machine weight 24,100 kg, mold temperature control unit, manufacturer Oni, type Rhytemper FlexControl 8, 2x 4-circuit block modules 125 °C, visualization unit, part removal handling, manufacturer Engel, type Viper 20 EP8, year 2018, serial no. 221917, part enclosure, belt discharge conveyor, manufacturer Engel, type FL4600 B600HLI, year 2018, serial no. 2101471, external temperature control unit and material dosing system not included in the offer. Fsdpfxjy I Rxmj Aalepg

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,905 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 2,221 bar, opening stroke: 335 mm, total length: 2,420 mm, total width: 1,700 mm, total height: 3,100 mm, overall weight: 6,700 kg, Equipment: documentation/manual, For sale: Well-maintained injection moulding machine ENGEL INSERT 200V/60 with only 23,905 operating hours. The machine was used exclusively for sampling purposes. Fpedjy Iwlaspfx Aalog Inspection under power possible at any time! Technical specifications as per the pictures! Machine is immediately available!