ES 80/35 ST

ENGEL

Condition: used, Year of construction: 2013, Clamping Force: 60 tons (600 kN) Injection Unit Orientation: Vertical Rotary Table: Included Screw Diameter: 25 mm Shot Size: Around 4.4 oz (125 g) Injection Pressure: Up to 210 bar Kodpfx Aswp E Hzoh Nedg Injection Speed: Approximately 139 mm/s Mould Opening Stroke: 305 mm Ejector Stroke: 106 mm

Condition: excellent (used), Year of construction: 2004, Angel Victory 80/45 Tech Closing 45 TOnnen, tie-bar-less Kodpfx Ahjh Rawbe Nsdg Scrow 22 mm YEAR 2004 CC 200

Condition: good (used), Year of construction: 2008, Clamping force: 80 t Screw diameter: 35 mm Distance between tie bars V: 600 mm Distance between tie bars H: 670 mm Shot volume: 154 cm3 Type: Horizontal Drive: Hydraulic Ksdpfxsyarxdo Ah Njdg Engel e-victory 310/80 Year of manufacture 2008, 48765 engine hours Machine weight 5700Kg Prümer sneku 35mm, standard Minimum mold height 245mm, distance between plates 635mm pri maximum opening Dimensions of clamping plates 670x600mm, diameter of the central ring 125mm Closing force 80 tonnes (800kN) Maximum injection pressure 2000bar, injection speed 222mm/s Maximum stroke volume 160mm (154cm") Number of circuit coolers 12 with float pressure gauge (8x fixed side, 4x movable) 1x control of hydraulic cores Integrated regulator and 24 heating zones.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ENGEL Kdsdpfx Ahoyak A Is Njg Typ: ES650H/200W-200HL-2F Baujahr: 2004 Schließkraft: 200 Tonnen Holmabstand Holmlos Einbauhöhe min.: 500 mm Öffnungsweg: 750 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 251 cm³ Spritzteilgewicht in PS: 216 g Schnecke DN 2: 25 mm Max. Hubvolumen: 69 cm³ Spritzteilgewicht in PS: 60 g Steuerung: CC100 Technische Ausstattung: -Roboter Engel, Typ: ERC23/1-E -4 Stück Kernzüge -Drehtischsteuerung

Condition: excellent (used), Year of construction: 1998, Angel ES 330/80 HLS Closing 80 tons Year 1998 Scrow 35 mm Stroke volume 154 cm3 Enlarged clamping plate 660x560 Mould height min 200 mm Kdedspdr Aispfx Ah Neg

Condition: excellent (used), Year of construction: 2017, Engel DUO11050/1300 PRO (2017) Clamping force: 1300 ton Min/Max Mould: 700-1400mm Platen size HxV: 2200x1990mm Kdjdpfx Ahjyaat Aj Neg Tie bar distance: 1530x1275mm Screw dia: 120mm Injection volume: 6447 cm3 VIPER 60 robot

Year of construction: 2004, condition: ready for operation (used), controller manufacturer: ENGEL, controller model: n/a, overall weight: 10,500 kg, This Engel Elast 1500/250V was manufactured in 2004. It's a vertical injection moulding machine designed for precision and efficiency in plastic processing. Consider the opportunity to buy this Engel Elast 1500/250V vertical injection moulding machine. Contact us for more information. Machine Benefits Technical Machine Benefits • 3 machines available - note that one of the available machines has a defective control unit. • Rated voltage: 3 x 400v Kedpsx U U Ixjfx Ah Nodg • Frequency: 50 hz • Connected load: 64kw • Rated current: 107a • Control voltage: 230 v Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2007, Engel VC 200/40 TECH injection molding machine Year of production - 2007 Control - CC 200 Closing unit: Closing force [kN] - 400 Clamping plate dimensions (hxv) [mm] -550 x 430 Min./max. mold height [mm] min -180 Maximum opening width [mm]- 530 Kdodpfx Aowa S Uaeh Njg Injection unit Screw diameter [mm] -30 Injection volume [cm3]- 99 Injection pressure [bar]- 1451 Electric-hydraulic equipment Pump motor rated power [kW] 15 Dimensions and weight: Net weight with control cabinet [t]- 2.7 Dimensions (length x width x height) [m] -3.26m x 1.2m x 1.8m

Condition: excellent (used), Year of construction: 2016, Equipment: documentation/manual, Engel victory 1350/400 tech (2016) Controll : CC300 Clamping force: 400 t Screw diameter: 55 mm Shot weight: 560 g Distance between tie bars V: 1100 mm Distance between tie bars H: 1220 mm Shot volume: 618 cm3 Type: Horizontal Drive: Hydraulic 8x core pullers 2x pneu valve conveyor Kedpfx Ahex H Nk Ee Njdg Wittmann linear robot

Condition: ready for operation (used), Year of construction: 2011, clamping force: 6,500 kN, screw diameter: 90 mm, This Engel DUO 4550/650 was manufactured in 2011. It features a clamping force of 6500 kN and a maximum opening stroke of 1650 mm. The machine supports a mold height ranging from 400 mm to 2000 mm and a platen size of 1510 × 1440 mm. The screw diameter is 90 mm, enhancing its injection capabilities. Consider the opportunity to buy this Engel DUO 4550/650 hydraulic injection moulding machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Net clamping/injection unit: 20 / 10 tons • Opening force (with pressure pad): 510 kn • Opening force: 190 kn • Platen size (h × v): 1510 × 1440 mm • Tie bar diameter: 175 mm • Mold weight (max): 11000 kg • Dry operation (euromap 6) time: 2. 9 sec Kjdpfx Ahsx U Tmyo Njdg • Dry operation (euromap 6) stroke: 700 mm Extra Information Injection Unit Screw stroke: 390 mm Injection capacity: 2480 cm³ Screw torque: 97 kNm L/D ratio (3-zone screw): 27 Recovery rate (3-zone screw): 104 g/s L/D screw length (Barrier): 22 Plasticizing capacity (Barrier): 135 g/s Injection rate: 720 cm³/s Injection rate (with increased injection pressure): 630 cm³/s Injection pressure (regenerative): 1910 bar Specific injection pressure (increased): 2180 bar Nozzle stroke: 600 mm Nozzle contact pressure: 150 kN Heating capacity (standard): 62 kW Number of heating zones (incl. nozzle): 9 Rated drive power: 90 kW

Year of construction: 1993, condition: ready for operation (used), A total of six old injection molding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350kN, injection pressure: 1500bar, injection weight: 35g/hp, screw diameter: 22mm, centering bore: 110mm, mold opening stroke: 330mm, control: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700kN, screw diameter: 40mm, centering bore: 125mm, mold height min./max.: 190mm/420mm, tie bar distance X/Y: 305mm/135mm, mold opening stroke: 250mm, control: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700kN, injection pressure: 1500bar, injection weight: 117g/hp, screw diameter: 35mm, centering bore: 125mm, mould height min./max.: 200mm/400mm, tie bar distance: 305mm. 4) Arburg 221-75-350, year of construction: 1992, clamping force: 350kN, injection pressure: 1500bar, screw diameter: 22mm, centering bore: 110mm, mould height min./max.: 150mm/300mm, tie bar distance: 221mm. 5) Arburg 221-55-250, year of construction: 1991, clamping force: 250kN, injection weight: 32g/hp, screw diameter: 20mm, mold height min./max.: 150mm/300mm, tie bar distance: 320mm. 6) 2K injection molding machine Arburg 221-75-350, year of construction: 1993, clamping force: 350kN, injection pressure: 1500bar, injection weight: 38g/hp, screw diameter: 22mm, mold height min./max.: 150mm/300mm, tie bar distance: 221mm. Including 7-8 Arburg dryers, various injection units, compressor AirComp, mixing unit liquid-silicone with Arburg control and Scheugen plow. Documentation available. An on-site inspection is possible. Kdjdpovb Hbfjfx Ah Neg

Year of construction: 2016, operating hours: 48,336 h, condition: ready for operation (used), This Engel victory 1800/300 was manufactured in 2016. A hydraulic injection moulding machine with a 300-ton machine power, it features a screw diameter of 60 mm and supports up to 16 hot runners. Equipped with four hydraulic core pullers and a Viper 12 robot, it offers enhanced automation capabilities. Contact us for more information about this machine. • Machine power (tons): 300 • Between columns w x h (mm): 750 x 1000 • Min. mold height (mm): 400 • Max. mold height (mm): 900 • Max. distance between plates: 1300 • Diameter of center ring / height: 160/15 • Diameter of thread on ejector coupling: M24 Kodex U Dp Eopfx Ah Njdg • Diameter of screw (mm): 60 • Hot runners: 16 • Hydraulic core pullers: 4 • Robot: Viper 12

Condition: good (used), Year of construction: 2012, Clamping force: 160 t Kodpfx Aex U Avkjh Nodg Screw diameter: 35 mm Type: Horizontal Drive: Hydraulic

Condition: used, Technical details: turning diameter over bed: 460 mm turning diameter over support: 350 mm turning length: 1500 mm centre height: 250 mm spindle bore of work spindle: 52 mm range of revolution per miute: 35 -1800 U/min tailstock quill adjustment:: 230 mm Kdedpfx Ahjwa Nwfj Njg tailstock taper MT: MK4 weight of the machine ca.: 2,7 t dimension machine xH: 2,88 x 1,2 x 1,5 m Coolant pump with feed to manual valve Accessories: Steady rest D=130mm closed 3 Jaw chuck D=315mm from Forkhardt F315 *

Condition: new, Engel bimetallic screw cylinder, new and unused Kedpfx Ahsx Up U Te Njdg Diameter: 105 mm LD 22 Unit 4550: 3380 cm3 Unit 5550: 3700 cm3